BOMBAY Sherborne Side Table User manual

Sherborne Side Table
For questions or comments about your product, please contact us at
[email protected] or call our toll free customer service number
1-800-876-7336.
We guarantee that every product we sell
will stand up to the supreme test — our customers’ satisfaction.
BO _ 4832_ A 3 _ EN _ 0 8.11.15
CARE AND MAINTENANCE
Furniture Care
• Wipe spills with a clean dry soft cloth.
• Wash frame with a mild solution of soap
and water; rinse with clean water and dry
thoroughly.
• Avoid the use of harsh cleaners and
abrasives.
• Cover furniture with outdoor covers (sold
separately) when left outside during inclement
weather or when not in use.
• Make sure furniture is completely dry before
storage.
WARRANTY
• This is a residential warranty and does not
apply for commercial use.
• Arden Companies warrants this product
against defects in workmanship and materials
for 5 years from date of purchase.
• This warranty gives you specic legal rights,
and you may have other rights which vary
from state to state.
• Any implied warranty, including the warranty
of merchantability, is limited to the duration of
this warranty.
• Regular care and maintenance are required to
maintain warranty.
• Shipping charges are non-refundable.
Customer must cover shipping and handling
charges when ling a claim.
• We will repair or replace the defective part at
our sole discretion.
• For any warranty claim or questions, please
call Customer Service 1-800-876-7336 with
your date of purchase, a valid receipt, product
model number, and description of defect,
including photographs or physical inspection
of the product.
WARNING
• Do not sit or stand on the table top.
• Do not place heavy items on the table top. Maximum capacity 50 lbs/22.68 kg.
• Do not place extremely hot or cold items on the table top to avoid damage to the
table nish.

ASSEMBLY INSTRUCTIONS
1. Begin by placing the table top (A) face down on a soft at surface. (Fig. 1)
2. Attach one table leg (B) to the table top (A) using 4 Allen bolts (C), and 4 at washers (D).
Do not tighten the bolts until all parts are assembled together.
3. Repeat the process for the remaining 3 table legs (B).
4. Ensure all bolts are aligned and assembled correctly.
5. Fully tighten all Allen bolts (C) with the Allen wrench (E).
6. Sit the table upright on its legs (as shown in diagram). (Fig. 2)
7. Your table is now ready to use.
ASSEMBLY NOTES
• Please make sure that you have all the parts indicated before you begin assembly.
• Items should be assembled on a soft surface to avoid scratching during assembly.
• This product may need periodic tightening. We recommend tightening every 6 months.
• Caution: Do not overtighten.
CAUTION
Read all instructions before assembly and use of this product. Failure to follow these
instructions and warnings could result in injury or damage to the item. Keep these
instructions for future reference.
`
B
A
B
B
B
E
D
C
Fig. 1
Fig. 2
A B
Table Top Leg
1 4
LARGE PIECES
SMALL PIECES
C D
Small Allen Bolt
(1/4” x 16mm) Flat Washer
16 16
E
Allen Wrench
1
TOOLS