BOMBAY KIDS 1870967 User manual

1870967
Trundle 2-Poster Bed
Page 1 of 3 R1-4-16-03
Parts List
∗ Please make sure that you have all the parts indicated above before you begin assembly of this item.
∗ This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.
Hardware Illustration
F. Phillips Head Screw
A. Front Panel 1 pc
B. Back Panel 1 pc
C. Bottom Assembly 1 pc
D. Side Panels 2 pcs
E. Dividers 3 pcs
F. Phillips Head Screws 32 pcs
G. Phillips Head Screwdriver 1 pc

1870967
Trundle 2-Poster Bed
Page 2 of 3 R1-4-16-03
Assemble the Bottom Assembly and Panels
Parts required
A. Front Panel 1 pc D. Side Panels 2 pcs
B. Back Panel 1 pc F. Phillips Head Screws 32 pcs
C. Bottom Assembly 1 pc G. Phillips Head Screwdriver 1 pc
1.Attach Front and Back Panel (A&B) Lay Back Panel (B) face down on a soft surface.Align the pre-drilled holes
in the Bottom Assembly (C) with the pre-drilled holes in the Back Panel (B) and Front Panel (A). Secure with
Phillips Head Screws (F), using Phillips Head Screwdriver (G). See illustration #1.
2. Attach Side Panels (D) Align the pre-drilled holes in Side Panels (D) with the pre-drilled holes in the ends of Front
Panel (A), Back Panel (B) and Bottom Assembly (C). Secure with Phillips Head Screws (F),using Phillips Head
Screwdriver (G). See illustration #1.
Illustration # 1

1870967
Trundle 2-Poster Bed
Page 3 of 3 R1-4-16-03
Install the Dividers
3.Install Dividers (D) Insert Dividers (E) into the pre-cut grooves in the Front Panel (A) and Back Panel (B) inserting
dowels into pre-drilled holes of Bottom Assembly (C). See illustration #2.
Illustration # 2