BOMBAY Stanton 1854035 User manual

1854035
Stanton Upper Open Bookcase-CG
Page 1 of 5 R1-10-12-04
Parts and Hardware List
A. Top Panel 1 pc
B. Left Side Panel 1 pc
C. Right Side Panel 1 pc
D. Bottom Panel 1 pc
E. Back Panel 1 pc
F. Front Rail 1 pc
G. Adjustable Shelves 2 pcs
H. Connecting Bolts 10 pcs
I. Eccentric Cams 10 pcs
J. Plastic Caps 10 pcs
K. Shelf Supports 8 pcs
L. Pan Phillips Head Screws 20 pcs
M. Flat Phillips Head Screws 1 pc
N. Phillips Head Screwdriver 1 pc
O. Flat Head Screwdriver 1 pc
P. Mounting Plates 2 pcs
∗Please make sure that you have all the parts and hardware indicated above before you begin assembly of this item.
∗Use the hardware illustrations to determine correct piece and size.
∗This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗ This item may require periodic tightening.

1854035
Stanton Upper Open Bookcase-CG
Page 2 of 5 R1-10-12-04
Hardware Illustrations
H. Connecting Bolt I. Eccentric Cam
J. Plastic Cap K. Shelf Support
L. Pan Phillips Head Screw M. Flat Phillips Head Screw

1854035
Stanton Upper Open Bookcase-CG
Page 3 of 5 R1-10-12-04
Attach Left & Right Side Panels, Top Panel
Parts required
A. Top Assembly 1 pc I. Eccentric Cams 10 pcs
B. Left Side Panel 1 pc J. Plastic Caps 10 pcs
C. Right Side Panel 1 pc M. Flat Phillips Head Screws 1 pc
D. Bottom Panel 1 pc N. Phillips Head Screwdriver 1 pc
F. Front Rail 1 pc O. Flat Head Screwdriver 1 pc
H. Connecting Bolts 10 pcs
1. Attach Connecting Bolts (H) Align the exposed threads on the Connecting Bolts (H) with the pre-threaded holes
in the Top Assembly (A) and Left & Right Side Panels (B, C). Tighten in a clockwise direction using the Flat Head
Screwdriver (O). See Illustration #1
2. Attach Left & Right Side Panels (B, C) Align the Connecting Bolts (H) in the Left & Right Side Panels (B, C)
with the pre-drilled holes in the ends of the Bottom Panel (D) and Front Rail (F). Be sure the dowels in the Bottom
Panel (D) align with the pre-drilled holes in the Left & Right Side Panels (B, C). Insert the Eccentric Cams (I) into
the pre-drilled holes in the Bottom Panel (D) and Front Rail (F). Make sure the groove in the Eccentric Cams (I)
faces out and the arrow points toward the Connecting Bolts (H). Use the Phillips Head Screwdriver (N) to adjust
the Eccentric Cams (I) to lock the Connecting Bolts (H) in place by turning in a clockwise direction. Cover all the
Eccentric Cams (I) with the Plastic Caps (J). See Illustration #1.
3. Attach Top Assembly (A) Repeat step 2 to attach Top Assembly to the Left & Right Panels (B, C). Insert the Flat
Phillips Head Screw (M) through the pre-drilled hole in the middle of Front Rail (F) to the Top Assembly (A).
Secure in place using Phillips Head Screwdriver (N). See Illustration #1.
Illustration #1

1854035
Stanton Upper Open Bookcase-CG
Page 4 of 5 R1-10-12-04
Attach Back Panel & Adjustable Shelves
Parts required
A. Top Assembly 1 pc G. Adjustable Shelves 2 pcs
B. Left Side Panel 1 pc K. Shelf Supports 8 pcs
C. Right Side Panel 1 pc L. Pan Phillips Head Screws 16 pcs
D. Bottom Panel 1 pc N. Phillips Head Screwdriver 1 pc
E. Back Panel 1 pc
4. Attach Back Panel (E) Place the Back Panel (E) into the grooves in the Left & Right Side Panels (B, C), Top
Assembly (A) & Bottom Panel (D). Secure in place with Pan Phillips Head Screws (L) using the Phillips Head
Screwdriver (N). See Illustration #2.
5. Attach Adjustable Shelves (G) Insert the Shelf Supports (K) into the pre-drilled desired holes in the Left & Right
Side Panels (B, C). Place the Adjustable Shelves (G) onto the Shelf Supports (K). See Illustration #2.
G
Illustration #2

1854035
Stanton Upper Open Bookcase-CG
Page 5 of 5 R1-10-12-04
Attach Upper Bookcase to Lower Bookcase
Parts required
L. Pan Phillips Head Screws 4 pcs P. Mounting Plates 2 pcs
N. Phillips Head Screwdriver 1 pc
6. Attach Mounting Plates (P) Set the Stanton Uppper Open Bookcase assembly onto the Stanton Lower Wood
Door Bookcase assembly. Align the pre-drilled holes in the Mounting Plates (P) with the pre-drilled holes in the
back of the upper bookcase and the lower bookcase. Secure in place with the Pan Phillips Head Screws (L) using
the Phillips Head Screwdriver (N). See Illustration #3
Illustration #3