Boneco Four Seasons FS200 User manual

FS200
MANUAL
Read and save these instructions

17
en
INSTRUCTIONS FOR USE

18
en
TABLE OF CONTENTS
Technical data 19
Product features 20
Product overview 21
Assembly and use 22
Preparing for operation 22
Reset heater 22
Using the Four Seasons™23
Replacing the filter 24
Replacement filter – FS200F 24
Cleaning and maintenance 25
Cleaning the humidifier wick frame 25
Cleaning the water tank 26
Storage 26
Trouble shooting 27

19
en
Technical data*
Type designation FS200
Power consumption 2000W
Power supply voltage 220–240V ~ 50Hz
Capacity of Humidification 347 g/h
Volume of air flow 136 m3/h at high setting
Dimensions 230 x 260 x 650 mm
Weight 5.2 kg
* Subject to change
TECHNICAL DATA

20
en
Congratulations on your purchase of the Four Seasons™
combination “heater” / “humidifier” / “air purifier” /
“fan”! This amazing product combines all the benefits
and comforts of a space heater, a humidifier, an air pu-
rifier and fan into one space-saving and money-saving
product. You’ll soon agree that the Four Seasons™is
one product you can’t live without!
Please be sure to read the following instructions care-
fully to ensure optimal performance and safety.
envion.com
WELCOME PRODUCT FEATURES
• Durable, washable cloth wick
• LED low water level indicator light
• 3 independent controls settings (Heater, Humidi-
fier + Fan, Heater + Humidifier)
• 3 fan speed settings and 3 heating power levels
(LOW / MEDIUM / HIGH)
• Self-regulating PTC heater and over-heat protec-
tion
• Evaporative humidification eliminates the issue of
“white powder”
• Tip-over sensor for smart automatic shutoff con-
trol for the whole unit
• Empty water sensor for smart automatic power
shutoff for the humidifier
• Filter effectively removes, smoke, pollen, dust,
animal dander, dust mites from the air

21
en
PRODUCT OVERVIEW
1. Control panel
2. Humidifier water sensor
3. Humidifier wick frame
4. Wick frame release tab
5. Water tank
6. Cover frame
7. Humidifier wick
8. Air outlet grill
9. Fan speed switch
10. Refill light
11. Heater + Humidifier
12. Humidifier + Fan
13. Heater only
14. Function knob
15. Power button
16. Heater knob
17. Filter CONTROL PANEL
9
10
11
12
13
14
16
15
8
1
4
3
6
7
5
2
17

22
en
PREPARING FOR OPERATION
Unplug the Four Seasons™unit prior to filling the
tank with water.
1. Open the packing box and take out the Four Sea-
sons™unit.
2. Turn the unit upright for operation.
3. To remove the humidifier wick frame, press the
release tab and pivot the frame outwards and then
lift it out of the unit. See Figure 1.
You must remove the wick frame before you can
remove the tank.
4. Remove the tank by sliding it out of the unit (see
Figure 2).
5. Fill the water tank with clean water to maximum
water level marking on tank.
Do not overfill the tank. Use extreme caution to
ensure that water is poured only into the water
tank and that the rest of the unit stays dry. Never
plug in the unit if it gets wet.
6. After filling, put the tank back into the main body
and replace the humidifier wick frame.
FIGURE 1 FIGURE 2
ASSEMBLY AND USE
RESET HEATER
This heater is equipped with a temperature limiting
thermostat. If the unit should sense an overheat
condition, the element will stop heating. It can
only resume operation when user manual reset
the unit.
Unplug the unit and wait 10 minutes for the unit to cool
down, then plug unit back and follow the “Using the
Four Seasons™” instruction described in this manual.

23
en
USING THE FOUR SEASONS™
1. Plug the unit into an electrical outlet and press the
power button to turn on your Four Seasons™unit.
2. Turn the mode knob to select the desired function.
You may choose to use either the heater, the humidi-
fier, or the heater and humidifier together.
No matter which mode you select, the air purifier
feature will always be active.
3. Once you have chosen the mode you can control how
much air passes through your Four Seasons™unit by
sliding the fan speed button to low, medium or high
as you prefer.
4. When you select either the heater mode or the heater
+ humidifier mode you may control the amount of
heat your Four Seasons™produces. Choose low,
medium or high heat output.

24
en
REPLACEMENT FILTER – FS200F
1. Make sure the unit is turned off and unplugged. To
remove the cover frame, press the release tab and
pull the frame outwards (see Figure 3A/B).
2. Remove the filter by pulling the filter out from the
unit (see Figure 4).
3. Insert a new filter, then place cover frame back
into position.
REPLACING THE FILTER
FIGURE 3B FIGURE 4FIGURE 3A
Release Tab

25
en
FIGURE 6FIGURE 5
CLEANING AND MAINTENANCE
CLEANING THE HUMIDIFIER WICK FRAME
Always unplug the Four Seasons™unit prior to
cleaning or other maintenance.
1. Remove the humidifier wick frame as explained in
the “Assembly and use” section of this manual.
2. With the humidifier wick frame lying in front of you,
gently bend each side of the wick frame to release
the bottom roller (see Figure 5).
3. Release the top roller from the frame by carefully
bending back the frame bracket and removing the
roller axle from the bracket hole (see Figure 6).
Remove wick from rollers.
4. To clean the wick you may wash it in your washing
machine on a gentle cycle or use a mild detergent
to wash by hand. Rinse with clean water. Be sure
it is completely dry before reinserting.
5. Reinsert the humidifier wick into the rollers and
then insert the humidifier wick frame into the unit.