Boneco P400 User manual

P400
MANUAL
READ AND SAFE THESE INSTRUCTIONS

13
en
Type designation BONECO P400
Power supply voltage 220–240 V, 50 Hz
Power consumption 27 W
Operation noise level 30–58 dB(A)
Recommended room size 20 m² (ALLERGY filter) 19 m² (BABY filter) 21 m² (SMOG filter)
50 m³ (ALLERGY filter) 48 m³ (BABY filter) 53 m³ (SMOG filter)
Cleaning output (CADR) 230 m³/h (ALLERGY filter) 220 m³/h (BABY filter) 240 m³/h (SMOG filter)
Air flow 280 m³/h
Dimensions L×W×H 224×420×562 mm
Weight (empty) 7.2 kg / 7.9 kg (with “ALLERGY” filter)
OVERVIEW AND PART NAMES
* Depending on the model, a “BABY”, “SMOG” or “ALLERGY” filter type is included in standard delivery
1 2 3
4 5
6
1Front cover
2Pre-filter
3Filter*
4BONECO P400
5Touch display
6Fragrance container
7Power cable
7

14
en PUTTING INTO OPERATION
6
31
4
2
5
Take out the filter and remove the protective foil.
Remove the magnetically attached front cover.
Insert the filter back into the holder
(note the markings).
Take off the pre-filter.
Reattach the front cover.
Put the pre-filter back on.

15
en
FRONT COVER AND FILTER TYPES
MAGNETIC FRONT COVER
The BONECO P400 front cover is held on by magnets. The
air purifier does not switch on if the front cover is missing
or positioned incorrectly.
NOTES ON THE FILTERS
Your BONECO P400 was shipped from the factory with
the “ALLERGY”, “SMOG” or “BABY” filter. However, the
appliance is compatible with all three filter types. The
delivered filter can be replaced by another model at any
time if your requirements change.
REPLACEMENT FILTERS
You can get the replacement filters at your BONECO spe-
cialist dealer or at the online store at www.shop.boneco.
com. The filters are identified by these labels:
A401
ALLERGY
A402
BABY
A403
SMOG

16
en
BRIGHTNESS OF THE DISPLAY
The brightness of the display depends on the ambient
light. The display is dimmed automatically if the BONECO
P400 is used in a dark room (such as a bedroom).
CLEARING THE FILTER WARNING
The symbol does not go out automatically after the
filter has been replaced. Press and hold the button
for five seconds to hide the symbol. This also resets the
counter for the new filter at the same time.
INDICATORS ON THE DISPLAY
Overview of all indicators on the display
Symbol Meaning
Fan level 17
Filter used up, replace 18

17
en
The BONECO P400 can easily be adapted to suit your
needs. Whenever you switch off the unit, all settings are
saved until the next use. However, the settings are reset
whenever the unit is disconnected from the power supply.
BASIC FUNCTIONS
MANUALLY CONTROLLING THE FAN LEVEL
The fan level of the BONECO P400 can be controlled
manually, such as if you want the air to be thoroughly
purified in the shortest possible time.
Push the button repeatedly until the desired fan set-
ting is achieved.
POWER LEVEL
“Power Level” (P) can be achieved by pressing the
button. The fan is working at its maximum output under
Power Level (P).
USING FRAGRANCES
The fragrance container for adding fragrances is on the
backside of the BONECO P400.
1. Briefly push on the fragrance container to unlock it and
then remove the compartment.
2. Insert the fragrance into the fragrance container.
3. Push the fragrance container into the air purifier until
it clicks into place.

18
en
REPLACING THE FILTER
The filter is worn out if the symbol is illuminated. The
filter must be replaced at this point to continue to ensure
optimal air purification.
The filter must be replaced as soon as possible after the
reminder is displayed but after one year at the latest.
The procedure for replacing the filter corresponds to the
figures on page 14.
1. Replace the filter in accordance with the instructions
on page 14.
2. Hold the button for 5 seconds to the hide the symbol
.
CLEANING THE PRE-FILTER
The pre-filter prevents excessive dust accumulation from
getting inside the BONECO P400.
1. Clean the pre-filter under running water or using a
vacuum cleaner.
2. Allow the pre-filter to dry completely before re-insert-
ing it.
CLEANING AND MAINTENANCE

19
fr
INSTRUCTIONS D’UTILISATION
DU BONECO P400

20
fr INSTRUCTIONS D’UTILISATION DU BONECO P400
CHER CLIENT,
Nous vous félicitons pour l’achat du BONECO P400. Ce
purificateur d’air à haute efficacité est équipé d’un triple
système de filtration, qui libère l’air non seulement des
odeurs mais aussi de la poussière, du pollen et des parti-
cules d’impuretés. Le filtre permet de soulager efficace-
ment de nombreux symptômes, dont le rhume des foins
et les réactions allergiques à la poussière domestique et
aux déjections d’acariens.
Le BONECO P400 est conçu pour un fonctionnement
entièrement automatique et sans complication. Grâce à
la commande intelligente, le niveau sonore reste aussi
bas que possible.
Nous vous souhaitons beaucoup de moments heu-
reux avec votre nouveau purificateur d’air BONECO
P400!
CONTENU DE LA LIVRAISON
CARACTÉRISTIQUES TECHNIQUES*
BONECO P400 avec cordon
d’alimentation spécifique
au pays
Filtre «BABY», «SMOG» ou
«ALLERGY»
CD contenant des modes
d’emploi en plusieurs langues
* Sous réserve de modifications
Manuel imprimé
Désignation de modèle BONECO P400
Tension de réseau 220–240 V, 50 Hz
Puissance absorbée 27 W
Niveau sonore de fonctionnement 30–58 dB(A)
Convient pour des locaux de taille 20 m² (filtre ALLERGY) 19 m² (filtre BABY) 21 m² (filtre SMOG)
50 m³ (filtre ALLERGY) 48 m³ (filtre BABY) 53 m³ (filtre SMOG)
Puissance de purification (CADR) 230 m³/h (filtre ALLERGY) 220 m³/h (filtre BABY) 240 m³/h (filtre SMOG)
Flux d’air 280 m³/h
Dimensions L × l × H 224×420×562 mm
Poids à vide 7.2 kg / 7.9 kg (avec filtre “ALLERGY”)