Bosch 0 275 031 User manual

Performance Line
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM/H
RESET
TURBO
SPORT
S
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM
/H
Drive Unit | Intuvia |
PowerPack 300/400/500 | Charger
0 275 007 031/033/027 | 1 270 020 909 |
0 275 007 511/512/522/530/532 | 0 275 007 907
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
Performance Line
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM/H
RESET
TURBO
SPORT
S
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM
/H
Drive Unit | Intuvia |
PowerPack 300/400/500 | Charger
0 275 007 031/033/027 | 1 270 020 909 |
0 275 007 511/512/522/530/532 | 0 275 007 907
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
Performance Line
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM/H
RESET
TURBO
SPORT
S
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM
/H
Drive Unit | Intuvia |
PowerPack 300/400/500 | Charger
0 275 007 031/033/027 | 1 270 020 909 |
0 275 007 511/512/522/530/532 | 0 275 007 907
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης

0 276 001 SPI | (3.6.15) Bosch eBike Systems
2|
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM/H
RESET
TURBO
SPORT
S
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM
/H
TURBO
SPORT
TOUR
ECO
OFF
MPH
KM/H
Reichweite
AMM
PMWH
MIN
MPH
KM/H
3
2
1
78
9
d
b
c
a
f
g
h
i
e
6
5
4

| 3
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
ECO
MPH
KM/H
Reichweite
KM/H
RESET
ECO
MPH
KM/H
Reichweite
KM
/H
17
13
14 11
12
18
5
–
17 mm
10
4
3
15
16
BA

0 276 001 SPI | (3.6.15) Bosch eBike Systems
4|
A1
C1
A9
C6
C7
A8
A6
A5
A5
A7
A2
C7 C6
A4
A3
A3
A4
A6

| 5
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
A8
A5
A6
A9
A1
A2
A5
A6
A7
7°
D
C

0 276 001 SPI | (3.6.15) Bosch eBike Systems
6|
eBike Battery Charger 36-4/230 Active/Performance Line
0 275 007 907
Li-Ion
Use ONLY with BOSCH Li-Ion batteries
Input: 230V 50Hz 1.5A
Output: 36V 4A
Made in PRC
Robert Bosch GmbH, Reutlingen
C2
C1
C3
C4
C5

| 7
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
A3
C5
C6
A8
C6 A2
C3
C2
A4
F
E

0 276 001 SPI | (3.6.15) Bosch eBike Systems
8|
C5
C5
A2
A8
C7
C7
C6
C6
G

English–1
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
Drive Unit/
On-board computer Intuvia
Safety Notes
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Save all safety warnings and instructions for future
reference.
The term “battery pack” used in these operating instructions,
irrespective of model, refers both to standard battery packs
(batterypackswithholderonthebikeframe)andtorack-type
battery packs (battery packs with holder in the rear rack/
carrier).
fDo not open the drive unit yourself. The drive unit must
be repaired only by qualified experts and only with
original spare parts. This will ensure thatthe safety of the
driveunit is maintained. Unauthorisedopening ofthedrive
unit will void warranty claims.
fAll components mounted to the drive unit and all other
components of the eBike drive (e.g., the chainwheel,
chainwheel seat, pedals) may be replaced only with
identical components or components specifically ap-
provedforyoureBikebythebicyclemanufacturer.This
protects the drive unit against overload and damage.
fRemove the battery pack from the eBike before begin-
ning work (e.g. inspection, repair, assembly, mainte-
nance, work on the chain, etc.) on the eBike, transport-
ing it by car or plane, or storing it. Unintentional
activation of the eBike system poses a risk of injury.
fTheeBikesystem canswitch itself on whenthe eBikeis
pushed backwards.
fThe push/start aid feature may only be used when
pushing or starting the eBike. There is danger of injury if
the wheels of the eBike do not have ground contact while
using the push/start aid feature.
fThe pedals may also rotate when the push assistance is
switchedon. When thepushassistanceisactivated,make
sure that your legs are a sufficient distance away from the
rotating pedals. There is a risk of injury.
fUse only original Bosch battery packs approved for
your eBike by the manufacturer. Using other battery
packs can lead to injuries and pose a fire hazard. When us-
ing other battery packs, Bosch shall not assume any liabil-
ity and warranty.
fDo not makeany modifications to youreBike systemor
fit any other products which would be suitable for in-
creasing the performance of your eBike system. This
normally reduces the lifetime of the system and risks dam-
age to the drive unit and the bike. There is also a risk of los-
ingtheguaranteeandwarrantyclaims on thebikeyouhave
purchased. By handling the system improperly you are al-
so endangering your safety and that of other road users,
thus running the risk of high personal liability costs and
possibly even criminal prosecution in the event of acci-
dents attributable to manipulation.
fPlease observe all national regulations on registering
and using eBikes.
fPlease read and observe the safety warnings and in-
structionsenclosedin theoperating instructions of the
battery pack as well as in the operating instructions of
your eBike.

English–2
0 276 001 SPI | (3.6.15) Bosch eBike Systems
Product Description and
Specifications
Intended Use
The drive unit is intended only for driving your eBike and must
not be used for other purposes.
Product Features (see page 2–3)
The numbering of the components shown refers to the illus-
trations on the graphic pages at the beginning of the manual.
All illustrations of bike parts except for the drive unit, on-
board computer including operating unit, speed sensor and
the corresponding holders are schematic and may differ on
your eBike.
1Display-function button “i”
2Bike lights button
3On-board computer
4Holder for on-board computer
5On/Off button for on-board computer
6“RESET” button
7USB port
8Protective cap of USB port
9Drive unit
10 Operating unit
11 Display-function button “i” on the operating unit
12Decrease assistance level/scroll down button “–”
13 Increase assistance level/scroll up button “+”
14 Push-assistance/start-assistance button “WALK”
15Lock latch for on-board computer
16Locking screw for on-board computer
17 Speed sensor
18 Spoke magnet of the speed sensor
USB charging cable (Micro A – Micro B)
Display elements of on-board computer
aDrive unit assistance indicator
bAssistance-level indicator
cLight indicator
dText indication
eValue indication
fSpeed indication
gShift recommendation: higher gear
hShift recommendation: lower gear
iBattery charge-control indicator
Technical Data
Drive Unit Drive Unit Cruise
Article number 0 275 007 033
Rated continuous output W250
Torque at drive, max. Nm 60
Rated voltage V36
Operating temperature °C –5...+40
Storage temperature °C –10...+50
Degree of protection IP 54 (dust and splash
water protected)
Weight, approx. kg 4
Drive Unit Drive Unit Speed
Article number 0 275 007 031
Rated continuous output W250
Torque at drive, max. Nm 60
Rated voltage V36
Operating temperature °C –5...+40
Storage temperature °C –10...+50
Degree of protection IP 54 (dust and splash
water protected)
Weight, approx. kg 4
Drive Unit Drive Unit CX
Article number 0 275 007 027
Rated continuous output W250
Torque at drive, max. Nm 75
Rated voltage V36
Operating temperature °C –5...+40
Storage temperature °C –10...+50
Degree of protection IP 54 (dust and splash
water protected)
Weight, approx. kg 4

English–3
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
Assembly
Inserting and removing the battery pack
Forinserting andremoving the eBike batterypack in/from the
eBike, please read and observe the battery pack operating in-
structions.
Inserting and removing the on-board computer
(see figure A)
To insertthe on-boardcomputer 3, slideit fromthe frontinto
the holder 4.
To remove the on-board computer 3, press the lock latch 15
and slide the on-board computer toward the front out of the
holder 4.
fRemove the on-board computer when you park the
eBike.
It is possible to secure the on-board computer against remov-
al in the holder. To do so, remove the holder 4from the han-
dlebar. Put the on-board computer in the holder. Screw the
locking screw 16(thread M3, 8 mm long) from below into the
threadprovidedin the holder.Mountthe holder backonto the
handlebar.
Checking the Speed Sensor (see figure B)
The speed sensor 17 and its spoke magnet 18 must be
mounted in such a manner that the spoke magnet, after a turn
of the wheel, moves pastthe speed sensor with a clearance of
at least 5 mm, yet no more than 17 mm.
Note: If the distance between speed sensor 17 and spoke
magnet 18 is too small or too large, or if the speed sensor 17
is not properly connected, the speed indication fwill fail, and
the eBike drive unit will operate in emergency mode.
In this case, loosen the screw of the spoke magnet 18 and fas-
ten the spoke magnetto the spoke in such a manner that itruns
past the mark of the speed sensor at the correct clearance. If
the speed is still not being indicated in the speed indication f
after this, please contact an authorised bicycle dealer.
Operation
Initial Operation
Requirements
The eBike system can only be activated when the following
requirements are met:
– A sufficiently charged batterypack is inserted (see battery
pack operating instructions).
– The on-board computer is properly inserted in the holder
(see “Inserting and removing the on-board computer”,
page English–3).
– The speed sensor is connected properly (see “Checking
the Speed Sensor”, page English–3).
Switching the eBike System On/Off
Options for switching on the eBike system:
– If the on-board computer is already switched on when you
insert it into the holder, then the eBike system will be
switched on automatically.
– When the on-board computer and the eBike battery pack
are inserted, briefly press the On/Off button 5of the on-
board computer.
– When the on-board computer is inserted, press the On/Off
button of the eBike battery pack (see battery pack operat-
ing instructions).
The drive is activated as soon as you step on the pedals
(except when in the push assistance/start assistance func-
tion, see “Switching the Push/Start Aid On/Off”, page
English–5). The motor output depends on the settings of the
assistance level on the on-board computer. As soon as the
system is activated, “Performance Line/Performance
Line CX” will appear briefly on the display.
As soon as you stop pedaling when in normal operation, or as
soon as you have reached a speed of 25/45 km/h, the assis-
tance from the eBike drive is switched off. The drive is auto-
maticallyre-activatedassoonyoustartpedalingagainandthe
speed is below 25/45 km/h.
On-board computer Intuvia
Article number 1 270 020 909
Max. charging current,
USB connection mA 500
Charging voltage,
USB connection V5
USB charging cable1) 1 270 016 360
Operating temperature °C –5...+40
Storage temperature °C –10...+50
Charging temperature °C 0...+40
Protection type2) IP 54 (dust and splash
water protected)
Weight, approx. kg 0.15
1) Not included in standard scope of delivery
2) When USB cover is closed
Bosch eBike system uses FreeRTOS (see www.freertos.org)
Bike lights*
Rated voltage V6
Power output
–Frontlight
– Rear light
W
W
8.4
0.6
* Not possible viathe eBike battery pack in allcountry-specificversions,
depending on the statutory regulations

English–4
0 276 001 SPI | (3.6.15) Bosch eBike Systems
Options for switching off the eBike system:
– Press the On/Off button 5of the on-board computer.
– Switch the eBike battery pack off by its On/Off button (see
battery pack operating instructions).
– Remove the on-board computer out of its holder.
If the eBike is not moved and no button is pressed on the on-
board computer for 10 minutes, the eBike system will shut
down automatically in order to save energy.
eShift (optional)
eShift is the integration of automatic gear shifting systems in-
to the eBike system. To support the rider in the best way pos-
sible, the function indications and the basic settings menu
have been adapted for the “eShift” function.
eShift with NuVinci H|Sync
The optimum gear for the respective speed is automatically
set according to a pre-defined desired cadence. In manual
mode you can choose between multiple gears.
In the “NuVinciCadence” mode you can use the “–”or
“+” button on the operating unit to increase or decrease the
desired cadence. If you hold down the “–”or “+” button, the
cadence willincreaseor decrease insteps of five. The desired
cadence is shown on the display.
In the “NuVinciGear” mode you can use the “–”or “+”
buttonontheoperatingunittoswitch backand forth between
several defined transmission ratios. The engaged transmis-
sion ratio (gear) is shown on the display.
eShift with SRAM DD3 Pulse
The gear hub of the SRAM DD3 Pulse works on a speed-de-
pendentbasis.Regardlessof which gear is engaged on the de-
railleur gears, one of the three gears of the gear hub will auto-
matically be engaged “Gear: Auto”.
The engaged gear will beshownbriefly on the display whenev-
er the gear of the gear hub is shifted.
If the eBike is brought to a standstill from a speed of more
than 10 km/h, the system can automatically switch back to a
set “Start gear”. The “Start gear” can be set in the basic set-
tingsmenu(see“Displaying/AdaptingBasicSettings”onpage
English–6).
In the “Gear” mode you can use the “–”or “+” button on
the operating unit to switch back and forth between several
defined transmission ratios. The engaged transmission ratio
(gear) is shown on the display.
In the “Gear” manual mode, the system can also automati-
cally switch back to a set “Start gear”.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
eShift with Shimano Di2
For Shimano eShift you use the Shimano control lever to shift
gears.
The engaged gear will beshown briefly on thedisplay whenev-
er the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a standstill from a speed of more
than 10 km/h, the system can automatically switch back to a
set “Start gear”. The “Start gear” can be set in the basic set-
tingsmenu(see“Displaying/AdaptingBasicSettings”onpage
English–6).
Displays and configurations of the on-board
computer
Energy supply of the on-board computer
If the on-board computer is in the holder 4, a sufficiently
charged battery pack is inserted in the eBike and the eBike
system is turned on, then the on-board computer is powered
by the battery pack of the eBike.
If the on-board computer is removed from the holder 4, the
energy is supplied via an internal battery pack. If the internal
batterypackisweakwhen theon-boardcomputerisswitched
on, “Attach to bike” will appear in text indication dfor 3 s.
The on-board computer will then turn off again.
To charge the internalbattery pack, put the on-boardcomput-
er back in the holder 4(when a battery pack is inserted in the
eBike). Switch the eBike battery pack on by its On/Off button
(see battery pack operating instructions).
You can also charge the on-board computer via the USB port.
Open the protective cap 8. Connect the USB port 7of the on-
board computer via a suitable USB cable to a standard USB
charger or the USB port of a computer (5 V charging voltage,
max. 500 mA charging current). “USB connected” will ap-
pear in text indication dof the on-board computer.
fIf you do not use your eBike for several weeks, remove
the on-board computer from its holder. Store the on-
board computer in a dry environment at room tempera-
ture. Regularly recharge the on-board computer’s battery
pack.
Switching on/shutting down the on-board computer
Toswitch ontheon-board computer,brieflypress theOn/Off
button 5. The on-board computer can also be switched on
when it is not inserted in the holder (if the internal battery
pack is sufficiently charged).
To switch off the on-board computer, press the On/Off but-
ton 5.
If the on-board computer is not inserted in the holder, it auto-
matically switches off after 1 minute to save energy if no but-
ton is pressed.

English–5
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
Battery Charge-control Indicator
The battery charge-control indicator idisplays the charge
level of the eBike battery pack, not that of the on-board com-
puter’s internal battery pack. The charge level of the eBike
battery pack can also be checked on the LEDs of the battery
pack itself.
On indicator i, each bar of the battery pack symbol is equiva-
lent to a capacity of approx. 20 %:
The LEDs of the charge-control indicator on the
battery pack extinguish. The capacity for assisting
the drive has been used up, and assistance is gently switched
off. The remaining capacity is made available for the lighting
and the on-board computer. The indicator flashes.
The capacity of the eBike battery pack is enough for about
2 hoursoflighting.Thisdoesnotaccountforotherconsumers
(e.g. automatic gearbox, charging external devices at the
USB port).
If the on-board computer is removed from the holder 4, the
last displayed battery charge level is saved.
Setting the Assistance Level
On the operating unit 10 you can set how much the eBike
drive assists you while pedalling. The assistance level can be
changed at any time, even while cycling.
Note:Forindividualversions,it ispossiblethattheassistance
level is pre-set and cannot be changed. It is also possible that
less assistance levels are available for selection than listed
here.
The following assistance levels (max.) are available:
–“OFF”:The motorassistance isswitchedoff,andtheeBike
can be moved as a normal bicycle only by pedalling. The
push assistance/start assistance cannot be activated in
this assistance level.
–“ECO”: Effective assistance at maximum efficiency for
maximum cruising range
–“TOUR”:Uniform assistance, for touringwithlong cruising
range
–“SPORT”: Powerful assistance for sportive riding off road
as well as for urban traffic
–“TURBO”: Maximum assistance, supporting highest ca-
dence for sportive riding
To increase the assistance level, press the “+” 13 button on
theoperatingunituntilthe desiredassistancelevelappears in
the display b. To decrease the assistance level, press the
button“–”12.
The requested motor output is displayed in indicator a. The
maximum motor output depends on the selected assistance
level.
When the on-board computer is removed from the holder 4,
the last indicated assistance level is stored; the motor-output
indicator aremains empty.
Switching the Push/Start Aid On/Off
With the speed version, the push aid can also be used as a
start aid. The start aid is switched off at 18 km/h.
The push/start aid can make it easier for you to push or start
the eBike. The speed of this feature depends on the selected
gear and depending on the model, can reach a maximum of
6 km/h or 18 km/h.Thelower theselectedgear, the lowerthe
speed of this function (at full capacity).
fThe push/start aid function may only be used when
pushing or starting the eBike. If the wheels of the eBike
have no contact with the ground when using the push aid,
then there is risk of injury.
To switch on the push/start aid, press and hold the “WALK”
14buttononthe operatingunit. The eBikedriveis switchedon.
Note:The push assistance/start assistance cannot be activat-
ed in the “OFF” assistance level.
The push/start aid is switched off if one of the following
occurs:
–youreleasethe“WALK” 14 button,
– the wheels of the eBike are blocked (e.g. by actuating the
brakes or impacting against an obstacle),
– the speed exceeds 6/18 km/h.
Switching bike lights on/off
In the model in which the lighting is powered by the eBike sys-
tem,thefrontand rear lightscanbeswitched on andoff at the
same time via the on-board computer with button 2.
When the lighting is switched on “Lights on” appears and
when the lighting is switched off “Lights off” appears for ap-
prox. 1 s in text indication d. The lighting symbol cis dis-
played when the light is on.
Switching the bike light on and off has no effect on the back
lighting of the display.
Version Speed: Daytime running lights are always provided
in this option. When you switch on the eBike system (see
“Switching the eBike System On/Off”, page English–3), the
lights will also be switched on. The bike lights cannot be
switched off with button 2.
The eBike battery pack is fully charged.
The eBike battery pack should be recharged.
Assistance Level Assistance Factor* (Derailleur)
Cruise Speed CX
“ECO” 50 % 55 % 50 %
“TOUR” 120 % 120 % 120 %
“SPORT” 190 % 190 % 210 %
“TURBO” 275 % 275 % 300 %
* The motor output can vary for individual versions.

English–6
0 276 001 SPI | (3.6.15) Bosch eBike Systems
Speed and Distance Indication
The speed indication falways displays the current speed.
The following functions are available in the function indica-
tion (combination of text indication dand value indication e):
–“Clock”: Current time
–“Max. speed”: Maximum speed achieved since the last
reset
–“Avg. speed”: Average speed achieved since the last reset
–“Trip time”: Trip time since the last reset
–“Range”: Estimated range of the available battery-pack
charge (for constant conditions such as assistance level,
route profile, etc.)
–“Odometer”: Display of the total distance travelled with
the eBike (cannot be reset)
–“ NuVinci Cadence/Gear”: This menu item is displayed
only in conjunction with a Nu Vinci H|Sync automatic trans-
mission.
If you press the “i” button for longer than 1 s, you will ac-
cess the NuVinci menu item from any menu item in the in-
formation menu.
To switch from the “NuVinciCadence” mode to the
“NuVinciGear” mode, press the “i” button for 1 s.
To switch from the “NuVinciGear” mode to the
“NuVinciCadence” mode, all you have to do is briefly
press the “i” button.
The default setting is “ NuVinci Cadence”.
–“Gear”:This menu item appears only in conjunction with a
Shimano Di2gear hub. The currently engaged gear of the
transmission is shown on the display. The newly engaged
gearwillbe shownbriefly on the display whenever thegear
is shifted.
–“Gear: Auto”: This menu item appears only in conjunc-
tion with an SRAM automatic transmission.
By pressing the “i” button for more than 1 s, you can
switch back and forth between the “Gear: Auto” auto-
matic mode and the “Gear” manual mode.
If you are in first gear in manual mode, you can also press
the “–”12button to go to the “Gear: Auto” mode. By
pressing the “–”12button again, you can switch back to
the manual mode. It is also possible to access the manual
mode by pressing the “+” 13 button.
–“Trip distance”: Distance covered since the last reset
To switch between display functions, press button “i” 1on
the on-board computer or button “i” 11 on the operating unit
repeatedly until the required function is displayed.
To reset “Trip distance”, “Trip time” and “Avg. speed”,
switch to any of the three functions and then press and hold
the “RESET” button 6until the indication is set to zero. This
also resets the values of the other two functions.
To reset the “Max. speed”, switch to this function and then
pressandholdthe“RESET”button6untiltheindicationisset
to zero.
To reset “Range”, switch to this function and then press the
“RESET” 6button until the display is reset to the value of the
factory setting.
If the on-board computer is removed from theholder 4, allval-
ues of the features are saved and can still be displayed.
Displaying/Adapting Basic Settings
The basic settings can be displayed and changed regardless
of whether the on-board computer is inserted in the holder 4
or not. Some settings are visible and changeable only when
theoperatingcomputer isinserted.Somemenu itemsmay be
missing depending on the equipment of your eBike.
To access the basic settings menu, press and hold the
“RESET” button 6and the “i” button 1until “Configuration”
is displayed in text indication d.
To switch between the basic settings, press button “i” 1on
the on-board computer repeatedly until the required basic
setting is displayed. If the on-board computer is inserted in
the holder 4, you can also press button “i” 11 on the operat-
ing unit.
Tochangethebasicsettings,pressthe On/Off button5next
to indication “–”to reduce or scroll down, or the lighting but-
ton 2next to indication “+” to increase or scroll up.
If the on-board computer is inserted in the holder 4, it is also
possible to change using buttons “–”12and “+” 13 on the
operating unit.
To exit the function and save a changed setting, press the
“RESET” button 6for 3 s.
The following basic settings are available:
–“– Clock +”: The current time can be set here. Pressing
and holding the setting buttons fast-forwards the setting
speed.
–“– Wheelcircum. +”:Youcanchangethisvaluepre-setby
the manufacturer by ± 5 %. This menu item is displayed
only when the on-board computer is in the holder.
–“– English +”: You can change the language of the text indi-
cations. You can choose between German, English, French,
Spanish, Italian, Portuguese, Swedish, Dutch and Danish.
–“– Unit km/mi +”: The speed and distance can be dis-
played either in kilometres or miles.
Range Odometer NuVinci Cadence
(1s)
(1s)
NuVinci Gear
Range Odometer Gear: Auto
(1s)
(1s)
Gear
(1s)

English–7
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
–“– Timeformat +”:Thetimecanbe displayedeitherinthe
12 hour or 24 hour format.
–“– Shift recom. on/off +”: You can switch the indication
of a shift recommendation on and off.
–“Power-on hours”: Indicates thetotal travel duration with
the eBike (not changeable).
–“Gear calibration” (only NuVinci H|Sync): Here you can
calibrate the continuously variable transmission. Confirm
the calibration by pressing the “Bike lights” button. Then
follow the instructions.
In the event of an error, it can also be necessary to perform
calibration when riding. In this case, you also confirm the
calibration by pressing the “Bike lights” button and then
follow the instructions on the display.
This menu item is displayed only when the on-board com-
puter is in the holder.
–“– Start gear +”: This is the starting gear which can be set
when using SRAM DD3 Pulse and Shimano Di2. The auto-
matic shift-back function is switched off in the “––” posi-
tion. This menu item is displayed only in connection with
SRAM DD3 Pulse and Shimano Di2. This menu item is dis-
played only when the on-board computer is in the holder.
–“Displ. vx.x.x.x”: This is the software version of the
display.
–“DU vx.x.x.x”: This is the software version of the drive
unit. This menu item is displayed only when the on-board
computer is in the holder.
–“DU # xxxxxxxxx”: This is the serial number of the drive
unit. This menu item is displayed only when the on-board
computer is in the holder.
–“ Service MM/YYYY”: This menu item is displayed
when the bike manufacturer has set a fixed service ap-
pointment.
–“ Serv. xx km/mi”: This menu item is displayed when
the bike manufacturer has set a fixed service appointment
after a certain mileage has been reached.
–“Bat. vx.x.x.x”: This is the software version of the battery
pack. This menu item is displayed only when the on-board
computer is in the holder.
–“Gearvx.x.x.x”:This is the software version of the automat-
ic transmission. This menu item is displayed only when the
on-board computer is in the holder. This menu item is dis-
played only in conjunction with an automatic transmission.
Error Code Indication
The components of the eBike system are continuously and au-
tomatically monitored. When an error is detected, the respec-
tive error code is indicated in text indication d.
Press any button on the on-board computer 3or on the oper-
ating unit 10 to return to the standard indication.
Depending on the type of error, the drive unit is automatically
shutoff,ifrequired.Continuedtravelwithoutassistancefrom
thedrive unit ispossible atany time.However,have theeBike
checked before attempting new trips.
fTrouble-shooting actions may be performed by the
owner except those explicitly noted as “Contact your
Bosch eBike dealer”.
Code Cause Corrective Measure
410 One or more buttons of the on-board
computer are blocked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
414 Connection problem of the operating
unit
Have connections and contacts checked.
418 One or more buttons of the operating
unit are blocked.
Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
422 Connection problem of the drive unit Have connections and contacts checked.
423 Connection problem of the eBike
battery pack
Have connections and contacts checked.
424 Communication error among the
components
Have connections and contacts checked.
426 Internal time-out error Restart the system. If the problem persists, contact your Bosch eBike
dealer. In thiserror status, itis notpossible to displayor adjustthe wheel
circumference in the basic settings menu.
430 Internal battery pack of the on-board
computer is empty.
Charge the on-board computer (in the holder or via the USB port).
431 Software version error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
440 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.

English–8
0 276 001 SPI | (3.6.15) Bosch eBike Systems
450 Internal software error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
490 Internal error of the on-board computer Have the on-board computer checked.
500 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
502 Bike lighting error Check the light and the associated wiring. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
503 Error of the speed sensor Restart the system. If the problem persists, contact your Bosch eBike
dealer.
510 Internal sensor error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
511 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
530 Battery pack error Switch off the eBike, remove the eBike battery pack and reinsert the
eBike battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
531 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
540 Temperature error The eBikeis outsideof the permissibletemperature range. Switchoff the
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
550 An improper load was detected. Remove load. Restart the system. If the problem persists, contact your
Bosch eBike dealer.
580 Software version error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
591 Authentication error Switch off the eBike system. Remove the battery pack and reinsert it. Re-
start the system. If the problem persists, contact your Bosch eBike dealer.
592 Incompatible component Insert a compatible display. If the problem persists, contact your Bosch
eBike dealer.
593 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
595, 596 Communication error Check the wiring to the transmission and restart the system. If the
problem persists, contact your Bosch eBike dealer.
602 Internal battery pack error while
charging
Unplugthechargerfromthebatterypack.RestarttheeBikesystem.Plug
the charger into the battery pack. If the problem persists, contact your
Bosch eBike dealer.
602 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
603 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
605 Battery pack temperature error TheeBikeisoutsideofthe permissible temperature range.Switchoffthe
eBike system and allow the drive unit to either cool down or heat up to
the permissible temperature. Restart the system. If the problem per-
sists, contact your Bosch eBike dealer.
605 Battery pack temperature error while
charging
Unplugthechargerfrom thebatterypack.Allow thebatterypackto cool.
If the problem persists, contact your Bosch eBike dealer.
606 External battery pack error Check the wiring. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
Code Cause Corrective Measure

English–9
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
Power Supply of External Devices
via USB Connection
With the USB connection, it is possible to operate and charge
most devices whose power supply is possible via USB (e.g.,
various mobile phones).
Prerequisite for charging isthat the on-board computer and a
sufficiently charged battery pack are inserted in the eBike.
Open the protective cap 8of the USB port on the on-board
computer.Connect theUSBconnectionoftheexternaldevice
to the USB port 7on the on-board computer using the USB
charging cable Micro A – Micro B (available from your Bosch
eBike dealer).
Once the consumer has been disconnected, the USB connec-
tion must be sealed again carefully with the protective cap 8.
fA USB connection is not a waterproof plug-in connec-
tion. When riding in the rain, an external device must
notbe connectedand theUSB connectionmust be com-
pletely sealed with the protective cap 8.
Notes on Riding with the eBike System
When does the eBike Drive Unit Operate?
The eBike drive unit assists you when riding, as long as you
stepinto thepedals. Without pedaling,there isno assistance.
The motor output always depends on the amount of your ped-
aling power.
Whenapplyinglesspedalingpower,theassistanceorsupport
will be lower than when applying a lot of pedaling power. This
applies independent of the assistance Level.
TheeBikedriveautomaticallyswitches offat speedsin excess
of 25/45 km/h. When the speed falls below 25/45 km/h, the
drive is automatically available again.
An exception applies to the push-assistance function,in which
the eBike can be pushed at low speed without pedalling. The
pedals may also rotate when the push assistance isused.
The eBike can also be ridden as a normal bicycle without as-
sistance at any time, by either switching off the eBike system
or setting the assistance level to “OFF”. The same applies
when the battery pack is empty.
Interaction of the eBike System with the Bicycle Gears
The bicycle gears should be used as with a normal bicycle,
even with eBike motor assistance (please observe the operat-
ing instructions of your eBike).
Independent of the type of gearing, it is recommended to
briefly interrupt the pedaling while changing gears. This
makes changing gears easier and reduces the wear of the
drive train.
By selecting the right gear, you can increase the speed and
range with the same pedaling effort.
For this reason, follow the shift recommendations provided
by indications gand hon your display. If indication gis dis-
played, you should shift to a higher gear with lower cadence.
Ifindication his displayed,youshould select alower gear with
higher cadence.
Gathering First Experience
It is recommended to gather first experience with the eBike
away from roads with heavy traffic.
Try out the different assistance levels. As soon as you feel
safe, you can participate in traffic with the eBike as with any
other bicycle.
Test the operating range of your eBike under different condi-
tions before planning longer and more challenging rides.
Influences on the Operating Range
The operating range depends on many factors, such as:
– Assistance level,
– Gear-switching behaviour,
– Bicycle tyres and tyre pressure,
– Age and condition of the battery pack,
– Route profile (inclines) and road or path conditions (road
or path surface),
– Head wind and ambient temperature,
– Weight of the eBike, rider and equipment/luggage.
610 Battery pack voltage error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
620 Charging error Replace the charger. Contact your Bosch eBike dealer.
640 Internal battery pack error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
655 Multiple battery pack errors Switch offthe eBike system. Remove the battery pack and reinsert it. Re-
start the system. If the problem persists, contact your Bosch eBike dealer.
656 Software version error Contact your Bosch eBike dealer so that he can perform a software
update.
7xx Transmission error Please observe the operating instructions provided by the transmission
manufacturer.
No display Internal error of the on-board computer Restart your eBike system by switching it off and back on.
Code Cause Corrective Measure

English–10
0 276 001 SPI | (3.6.15) Bosch eBike Systems
For this reason, it is not possible to precisely predict the
range before and during a trip. General rules:
– Forthe same motoroutputoftheeBikedriveunit:Theless
power or force that you have to bring about to reach a cer-
tain speed (e.g. through optimal use of the gears), the less
energy the eBike drive unit will consume, and the greater
the range for a battery-pack charge.
–Thehigherthe assistance level under otherwise same con-
ditions, the lower the range.
Careful Handling of the eBike
Pleaseobservetheoperatingandstoragetemperaturesofthe
eBikecomponents.Protectthedriveunit,on-boardcomputer
and battery against extreme temperatures (e.g. from intense
sunlight without adequate ventilation). The components (es-
pecially the battery pack) can become damaged through ex-
treme temperatures.
Maintenance and Service
Maintenance and Cleaning
Keep all components of your eBike clean, especially the bat-
tery-pack contacts and corresponding holder contacts. Clean
them carefully with a soft, damp cloth.
All components including the drive unit may not be immersed
in water or cleaned with a high-pressure cleaner.
Have your eBike undergo a technical inspection at regular in-
tervals. When the service appointment is due, the on-board
computer will inform you of this for 4 seconds in the text indi-
cation dby displaying “Service”after the on-board com-
puter has been switched on. The bike manufacturer can base
the service appointment on a mileage and/or a time period.
For service or repairs on the eBike, please refer to an author-
ised bicycle dealer.
After-sales Service and Application Service
In case of questions concerning the eBike system and its com-
ponents, please refer to an authorised Bosch eBike dealer.
For contact data of authorised Bosch eBike dealers, please
refer to www.bosch-ebike.com
Transport
fIf you carry your eBike outside of your car, e.g.on a lug-
gage rack, remove the on-board computer and the
eBike battery pack in order to avoid damaging them.
The battery packs are subject to the Dangerous Goods Legis-
lation requirements. Private users can transport undamaged
battery packs by road without further requirements.
When being transported by commercial users or third parties
(e.g. air transport or forwarding agency), special require-
mentsonpackagingandlabellingmustbeobserved(e.g.ADR
regulations). If necessary, an expert for hazardous materials
can be consulted when preparing the item for shipping.
Dispatch battery packs only when the housing is undamaged.
Tape or mask off open contacts and pack up the battery pack
insucha manner that it cannot move around inthe packaging.
Inform your parcel service that the package contains danger-
ous goods. Please also observe the possibility of more de-
tailed national regulations.
In case of questions concerning transport of the battery
packs, please refer to an authorised Bosch eBike dealer. The
Bosch eBike dealers can also provide suitable transport pack-
aging.
Disposal
The drive unit, on-board computer including operat-
ing unit, batterypack, speed sensor, accessories and
packaging should be disposed of in an environmen-
tally correct manner.
Do not dispose of eBikes and their components into house-
hold waste!
Only for ECcountries:
According to the European Guideline
2012/19/EU, electrical devices/tools that
are no longer usable, and according to the
European Guideline 2006/66/EC, defective
or used battery packs/batteries, must be
collected separately and disposed of in an
environmentally correct manner.
The integrated battery pack in the on-board computer may
only be removed for disposal. Opening the housing shell can
destroy the on-board computer.
Please return battery packs and on-board computers that are
no longer usable to an authorised bicycle dealer.
Li-ion:
Please observe the instructions in sec-
tion “Transport”, page English–10.
Subject to change without notice.

English–11
Bosch eBike Systems 0 276 001 SPI | (3.6.15)
Lithium-ion battery pack PowerPack
Safety Notes
Read all safety warnings and
all instructions. Failure to fol-
low the warnings and instruc-
tions may result in electric
shock, fire and/or serious
injury.
Save all safety warnings and instructions for future
reference.
The term “battery pack” used in these operating instructions
refers both to standard battery packs (battery packs with
holder on the bike frame) and to rack-type battery packs (bat-
tery packs with holder in the rear rack/carrier), except when
explicitly referring to the design type.
fRemove the battery pack from the eBike before begin-
ning work (e.g. inspection, repair, assembly, mainte-
nance, work on the chain, etc.) on the eBike, transport-
ing it by car or plane, or storing it. Unintentional
activation of the eBike system poses a risk of injury.
fDo not open thebattery pack. Danger of short-circuiting.
Opening the battery pack voids any and all warranty
claims.
Protect the battery against heat (e.g. pro-
longed sun exposure) and fire and from being
submerged in water. Do not store or operate
the battery near hot or flammable objects.
There is a risk of explosion.
fKeep the battery packnot being used away from paper
clips, coins, keys, nails, screws or other small metal ob-
jects, that can make a connection from one terminal to
another. Shorting the battery-pack terminals together
may cause burns or a fire. For short-circuiting damage
caused in this manner, any and all warranty claims through
Bosch shall be invalid.
fUnder abusive conditions, liquid may be ejected from
thebattery pack.Avoid contact.If contact accidentally
occurs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help. Liquid ejected from the bat-
tery pack may cause skin irritations or burns.
fBattery packs must not be subjected to mechanical im-
pacts.Thereis a riskthat thebattery packwill be damaged
causing vapours to escape. The vapours can irritate the
respiratory system. Provide for fresh air and seek medical
attention in case of complaints.
fThe battery may give off fumes if it becomes damaged
or is used incorrectly. Provide a fresh air supply and
seek medical advice in the event of pain or discomfort.
These fumes may irritate the respiratory tract.
fCharge the battery pack only with original Bosch bat-
tery chargers. When using non-original Bosch chargers,
the danger of fire cannot be excluded.
fUse the battery pack only together with eBikes that
have an original Bosch eBike drive system. This is the
only way to protect the battery pack against dangerous
overload.
fUse only original Bosch battery packs approved for
your eBike by the manufacturer. Using other battery
packs can lead to injuries and pose a fire hazard. When us-
ing other battery packs, Bosch shall not assume any liabil-
ity and warranty.
fRead the safety warnings and instructions in the oper-
ating instructions of the charger and the drive unit / on-
boardcomputer aswell asinthe operating instructions
of your eBike.
fKeep the battery pack out of reach of children.
Product Description and
Specifications
Product Features (see page 4–5)
The numbering of the product features refers to the illustra-
tions on the graphics pages.
Allrepresentations of bike components, withexceptionofthe
battery packs and their holders, are schematic and can devi-
ate from your eBike.
A1 Holder of the rack-type battery pack
A2Rack-type battery pack
A3 Operation and charge-control indicator
A4 On/Off button
A5Key of the battery pack lock
A6Battery-pack lock
A7 Upper holder of the standard battery pack
A8 Standard battery pack
A9 Bottom holder of the standard battery pack
C1Battery charger
C6 Socket for charge connector
C7Charge socket cover

English–12
0 276 001 SPI | (3.6.15) Bosch eBike Systems
Technical Data
Assembly
fPlace down the battery pack only on clean surfaces. In
particular, avoid soiling the charge socket and the con-
tacts, e. g. by means of sand or soil.
Checking the Battery Pack Before Using for the
First Time
Check the battery pack before charging it or using it with your
eBike for the first time.
For this, press the On/Off button A4 to switch on the battery
pack. When no LED of the charge-control indicator A3 lights
up, the battery pack may be damaged.
When at least one, but not all LEDs of the charge-control indi-
cator A3 is lit, then fully charge the battery pack before using
for the first time.
fDo not attempt to charge or use a damaged battery
pack. Please refer to an authorised Bosch eBike dealer.
Charging the Battery Pack
fUseonly theBosch chargerprovidedwithyoureBikeor
an identical original Bosch charger. Only this charger is
matchedto thelithium-ion battery packusedin youreBike.
Note: The battery pack is supplied partially charged. To en-
sure full battery pack capacity, completely charge the battery
pack in the charger before using for the first time.
Forchargingthebatterypack,readandobservetheoperating
instructions of the charger.
Thebatterypackcanbe rechargedatanytimeonitsownoron
the bike without shortening the lifespan. Interrupting the
charging process does not damage the battery pack.
The battery pack is equipped with a temperature control indi-
cator, which enables charging only within a temperature
range between 0 °C and 40 °C.
When the battery pack is not
within the charging-tempera-
ture range, three LEDs of the
charge-control indicator A3
flash. Disconnect the battery pack from the charger until its
temperature has adjusted.
Do not connect the battery pack to the charger until it has
reached the allowable charging temperature.
Charge-control Indicator
When the battery pack is switched on, the five green LEDs of
the charge-control indicator A3indicate the charge condition
of the battery pack.
In this, each LED indicates approx. 20 % capacity. When the
battery pack is completely charged, all five LEDs light up.
The charge level of the switched on battery pack is also shown
onthedisplayoftheon-board computer.Whendoingso, read
and observe the operating instructions of the drive unit and
on-board computer.
If the capacity of the battery pack is below 5 %, all LEDs of the
charge-control indicator A3 on the battery pack go out. How-
ever there is another display function of the on-board com-
puter.
Lithium-ion battery pack PowerPack 300 PowerPack 400 PowerPack 500
Article number
– Standard battery pack
– Rack-type battery pack
0 275 007 509
0 275 007 511
0 275 007 513
0 275 007 510
0 275 007 512
0 275 007 514
0 275 007 522
0 275 007 529
0 275 007 530
0 275 007 531
0 275 007 532
Rated voltage V= 36 36 36
Rated capacity Ah 8.2 11 13.4
Energy Wh 300 400 500
Operating temperature °C –10...+40 –10...+40 –10...+40
Storage temperature °C –10...+60 –10...+60 –10...+60
Allowable charging temperature range °C 0...+40 0...+40 0...+40
Weight, approx. kg 2.0/2.4 2.5/2.6 2.6/2.7
Degree of protection IP 54 (dust and splash
water protected)
IP 54 (dust and splash
water protected)
IP 54 (dust and splash
water protected)