Bosch Kiox 300 User manual

en Original operating instructions
Kiox 300
Online Version (BHU3600)

English – 2
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 3
Table of Contents
Safety instructions .........................................................................5
Privacy notice......................................................................... 6
Congratulations .............................................................................7
Product description and specifications..............................................7
Intended use .......................................................................... 7
Product features .....................................................................8
Technical data ........................................................................ 9
Assembly ....................................................................................10
Fitting and Removing the Display (seefigureA) ......................... 10
Inserting the Removal Blocker (seefigureB) ............................. 11
Operation ...................................................................................13
Status page.......................................................................... 14
Start page ............................................................................ 16
Start screen level 2........................................................17
Trip page ............................................................................. 18
Trip screen level 2 .........................................................18
Range page .......................................................................... 19
Range page level 2.........................................................19
Fitness page......................................................................... 20
Fitness page level 2 .......................................................20
Creating a User ID ................................................................. 21
Connecting to the On-Board Computer Using the
eBike Flow App .................................................................... 21
<eBike Lock> ...................................................................... 21
Setting Up the<eBike Lock>..........................................22
Compatibility................................................................22
How it works.................................................................22
Replacing eBike Components and the<eBike Lock>..........23
Adjusting the Assistance Levels............................................... 24
Displays and Settings of theeBike Flow App....................................25
Activating theeBike Flow App ................................................ 25
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 4
Registration via Smartphone................................................... 25
Main Menu of theeBike Flow App ........................................... 26
Maintenance and servicing ............................................................27
Maintenance and cleaning ...................................................... 27
After-sales service and advice on using products ....................... 27
Transport............................................................................. 27
Disposal .............................................................................. 28
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 5
Safety instructions
Read all the safety information and instructions. Fail-
ure to observe the safety information and follow instruc-
tions may result in electric shock, fire and/or serious in-
jury.
Save all safety warnings and instructions for future reference.
The term battery is used in these instructions to mean all original Bosch
eBike rechargeable battery packs.
uRead and observe the safety warnings and directions contained in all
the eBike system operating instructions and in the operating instruc-
tions of your eBike.
uDo not attempt to secure the display or operating unit while riding.
uDo not allow yourself to be distracted by the on-board computer's
display. If you do not focus exclusively on the traffic, you risk being in-
volved in an accident. If you want to make entries in your on-board com-
puter other than switching the assistance level, stop and enter the appro-
priate data.
uDo not use your smartphone while riding. If you do not focus exclus-
ively on the traffic, you risk being involved in an accident. Only enter the
relevant data having stopped first.
uSet the display brightness so that you can adequately see important
information such as speed and warning symbols. Incorrectly set dis-
play brightness may lead to dangerous situations.
uDo not open the on-board computer. Opening the on-board computer
may damage it beyond repair and void any warranty claims.
uDo not use the on-board computer as a handle. Lifting the eBike up by
the on-board computer can cause irreparable damage to the on-board
computer.
uDo not stand your bicycle upside down on its saddle and handlebars
if the on-board computer or its holder protrude from the handlebars.
This may irreparably damage the on-board computer or the holder. Also
remove the on-board computer before placing the bicycle on a wall
mount to ensure that the on-board computer does not fall off or become
damaged.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 6
Privacy notice
If the on-board computer is sent to Bosch Service because it requires servi-
cing, the data stored on the on-board computer may be transmitted to
Bosch.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 7
Congratulations
Congratulations on purchasing this eBike on-board computer.
Kiox 300 reliably displays all important riding data.
Updates
Kiox 300's range of functions is continually being expanded. Keep
youreBike Flow smartphone app up to date. You can use this app to down-
load new functions and transfer them to yourKiox 300.
In addition to the functions shown here, changes to software relating to
troubleshooting and functional enhancements may be introduced at any
time.
Product description and specifications
Intended use
TheKiox 300 on-board computer is designed to display cycling data.
To access the full functionality of theKiox 300 on-board computer, you will
need a compatible smartphone installed with theeBike Flow app (available
from the Apple App Store or the Google Play Store).
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 8
Product features
(1)
(7)
(6)
(4)
(2)
(8)
(3)
(10)
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 9
(1) Display
(2) Cable outlet
(3) Removal blocker
(4) Snap-in hook
(5) Adapter tray
(6) Display contacts
(7) Holder contacts
(8) Display mount
(9) Display mount fastening screw
(10) Bridge for retaining strapa)
a) The retaining strap is not included in the scope of delivery.
Technical data
On-board computer Kiox 300
Product code BHU3600
Operating temperature A) °C −5to +40
Storage temperature °C +10to+40
Protection rating IP54
Weight, approx. g 32
A) Temperatures outside of this range may cause faults in the display.
The licence information for the product can be accessed at the following Internet ad-
dress: https://www.bosch-ebike.com/licences
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 10
Assembly
Fitting and Removing the Display (seefigureA)
1
2
2
1
(1)
(4) (8)
(8)
(1)
A
(10)
To fit the display(1), attach the display(1) to the front edge of the display
mount(8) in the direction of travel, on the snap-in hook(4) ❶ and press the
rear side of the display(1) on the display mount(8)❷.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 11
To remove the display(1), pull the display(1) towards you ❶ until you are
able to lift off the display(1) ❷.
A retaining strap can be secured to the bridge(10).
Note: The eBike system will switch off if you are riding at under 3km/h and
remove the on-board computer from its holder. This does not apply to
eBikes with assistance up to 45km/h.
Inserting the Removal Blocker (seefigureB)
(9)
(3)
(8)
B
(5)
Note: Depending on the design/mounting of the display mount, it may not
be possible to insert the removal blocker. The display must be mounted.
Insert the removal blocker(3) into the adapter tray(5) from below until you
hear the removal blocker(3) click into place.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 12
From this point onwards, you can no longer lift off the display(1) from the
display fixture(8) without removing the display mount(8) from the adapter
tray(5) by loosening the two fastening screws(9).
Note: The removal blocker(3) is not an anti-theft device.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 13
Operation
The displays are operated and the indicators are controlled via a control
unit.
The meaning of the buttons on the operating unit for the display indicators
can be found in the following overview. Depending on how long it is pressed
for, the select button has two functions.
Scroll to the left
Scroll to the right
Scroll up
Scroll down
Change to the second page level (press briefly)
Open the settings menu on the status page (press briefly)
Open page-related options
e.g.<Reset trip> (press and hold >1s)
Please note: All screenshots showing the display and text on the following
pages are from the approved software version. The display and/or text may
change slightly following a software update.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 14
Status page
From the start page, you can access the status page by pressing the but-
ton.
80% eMTB
CONNECTIONS
10:45
SETTINGS
a
b
c
d
e
g
h
f
aBattery charge
bAssistance level
cBicycle lights
dTime
eConnection indicator
fSmartphone connection
gConnection status
hSettings Menu
You can access the settings menu from this page by pressing the button.
Note: The settings menu cannot be called up while riding.
The<SETTINGS> settings menu contains the following menu items:
–<My eBike>
You can find the following menu items here.
◦<Range reset>
The value for the range can be reset here.
◦<Auto trip reset>
The settings for automatic reset can be adjusted here.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 15
◦<Wheel circumf.>
The value of the wheel circumference can be adjusted or reset to the
standard setting here.
◦<Service>
The next service date is shown here, provided that it has been set by
the bicycle dealer.
◦<Components>
The components used with their version numbers are displayed here.
–<My Kiox>
You can find the following menu items here.
◦<Statusbar>
You can choose between the<Battery>,<Time> or<Speed> displays
here.
◦<Language>
You can select your preferred system language here.
◦<Units>
You can choose between metric or imperial measurements here.
◦<Time>
You can set the time here.
◦<Time format>
You can select one of the two time formats here.
◦<Brightness>
You can set the display brightness here.
◦<Settings reset>
You can reset all of the system settings to the default values here.
– Under the<Information> menu item, you will find the contact details
(<Contact>) and certificates (<Certificates>).
You can leave the settings menu by pressing the button or the button.
Press the button to access the start page.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 16
Start page
If you did not select another page before the last time you switched off, you
will be shown this page.
80% eMTB
21.4
SPEED km/h
a
c
i
j
k
l
m
b
aBattery charge
bAssistance level
cBicycle lights
iUnit of speed indicator
jIndicator name
kYour performance
lSpeed
mMotor output
Thea...c indicators form the status bar and are shown on every page.
You can use the button to change from this page to the status page or
press the button to access additional pages. The statistical data, battery
range and average values are displayed on these pages.
From each of these pages, you can access the second level of data by press-
ing the button.
If the user is on a different page to the start page when they switch off, the
most recently displayed page will appear again when the eBike is switched
on.
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 17
Pressing and holding the select button enables you to reset the statistical
data for your journey or excursion (not on the<SETTINGS> page).
Start screen level 2
eMTB 80%
AVG. SPEED km/h
20.5
MAX. SPEED km/h
29.2
a
c
i
n
o
b
aBattery charge
bAssistance level
cBicycle lights
iUnit of speed indicator
nAverage speed
oMaximum speed
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 18
Trip page
eMTB 80%
TRIP km
19.4
RIDING TIME h:min
02:02
SPEED km/h
21.4
a
c
p
q
l
b
aBattery charge
bAssistance level
cBicycle lights
pDistance
qJourney time
lSpeed
Trip screen level 2
eMTB 80%
TOTAL TRIP km
1850
CALORIES kcal
964
a
c
r
s
b
aBattery charge
bAssistance level
cBicycle lights
rTotal distance
sEnergy consumed
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 19
Range page
eMTB 80%
RANGE km
38
eBIKE %
80
a
c
t
a
b
aBattery charge
bAssistance level
cBicycle lights
tOperating range
Range page level 2
eMTB 80%
RANGE km
25 TURBO
38 eMTB
45 TOUR
64 ECO
a
c
u
b
aBattery charge
bAssistance level
cBicycle lights
uRange depending on the assistance
level
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)

English – 20
Fitness page
eMTB 80%
POWER W
134
CADENCE rpm
72
a
c
v
w
x
b
w
aBattery charge
bAssistance level
cBicycle lights
vYour performance
wPerformance indicator (above aver-
age)
If the needle of the performance in-
dicator is on the right-hand side or in
the middle, the background will turn
green. This means that your perform-
ance is greater than or equal to the
average value.
xCadence
wPerformance indicator (below aver-
age)
If the needle of the performance in-
dicator is on the left-hand side, the
background will turn orange. This
means that your performance is be-
low the average value.
Fitness page level 2
eMTB 80%
AVG. POWER W
129
AVG. CADENCE rpm
70
a
c
y
z
b
aBattery charge
bAssistance level
cBicycle lights
yAverage output in watts
zAverage cadence in revolutions per
minute
Bosch eBike Systems 0 275 007 3BKen | (20.12.2021)