Bosch DIVAR hybrid 3000 User manual

DIVAR 2000 | DIVAR 3000 | DIVAR 5000
Network/Hybrid Recorder
en Installation manual

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Table of contents | en 3
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
Table of contents
1Safety 4
1.1 Important safety instructions 4
1.2 FCC and UL 6
2Short information 8
3System overview 9
4Installation 10
4.1 Unpacking 10
4.1.1 Package contents 10
4.2 Make connections 11
4.2.1 Back panel connectors DIVAR network 2000/3000 (no PoE) 12
4.2.2 Back panel connectors DIVAR network 2000 (8 PoE) 13
4.2.3 Back panel connectors DIVAR network 2000/3000 (16 PoE) 14
4.2.4 Back panel connectors DIVAR network 5000 (no PoE) 15
4.2.5 Back panel connectors DIVAR network 5000 (16 PoE) 16
4.2.6 Back panel connectors DIVAR hybrid 3000 17
4.2.7 Back panel connectors DIVAR hybrid 5000 18
4.2.8 Browser setup 18
4.3 Powering up 19
4.4 Startup wizard 19
4.5 Login 20
4.6 Logout/Shutdown 20
5First time operation 21
5.1 Live viewing mode 21
5.2 Quick menu 22
5.3 Main menu 23
6Maintenance 24
6.1 Insert DIVAR 5000 in rack 24
6.2 Replace internal battery 24
6.3 Install HDD 24
6.4 Install DVD 24
7Decommissioning 25
7.1 Transfer 25
7.2 Disposal 25

4en | Safety DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
1 Safety
!
Warning!
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
!
Caution!
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
Notice!
Indicates a situation which, if not avoided, could result in damage to the equipment or
environment, or data loss.
1.1 Important safety instructions
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security
Systems cannot be held liable for any damage that results from missing video information.
To minimize the risk of losing information, we recommend multiple, redundant recording
systems, and a procedure to back up all analog and digital information.
Accessories - Do not place this unit on an unstable stand, tripod, bracket,
or mount. The unit may fall, causing serious injury and/or serious damage to
the unit. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer. When a cart is used, use caution and care when moving
the cart/apparatus combination to avoid injury from tip-over. Quick stops,
excessive force, or uneven surfaces may cause the cart/unit combination to
overturn. Mount the unit per the manufacturer's instructions.
Read, follow, and retain for future reference all of the following safety instructions. Heed all
warnings on the unit and in the operating instructions before operating the unit.
1. Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions
provided with the unit. Generally, using a dry cloth for cleaning is sufficient but a moist,
fluff-free cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat sources such as radiators, heaters,
stoves, or other equipment (including amplifiers) that produce heat.
3. Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent
overheating and ensure reliable operation. Do not block or cover these openings. Do not
place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's
instructions have been adhered to.
4. Water - Do not use this unit near water, for example near a bathtub, washbowl, sink,
laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor
installation, or in any area classified as a wet location. To reduce the risk of fire or
electrical shock, do not expose this unit to rain or moisture.

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Safety | en 5
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
5. Object and liquid entry - Never push objects of any kind into this unit through openings
as they may touch dangerous voltage points or short-out parts that could result in a fire
or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled
with liquids, such as vases or cups, on the unit.
6. Lightning - For added protection during a lightning storm, or when leaving this unit
unattended and unused for long periods, unplug the unit from the wall outlet and
disconnect the cable system. This will prevent damage to the unit from lightning and
power line surges.
7. Controls adjustment - Adjust only those controls specified in the operating instructions.
Improper adjustment of other controls may cause damage to the unit. Use of controls or
adjustments, or performance of procedures other than those specified, may result in
hazardous radiation exposure.
8. Overloading - Do not overload outlets and extension cords. This can cause fire or
electrical shock.
9. Power supply cord and plug protection - Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or against them,
playing particular attention to cords and plugs, convenience receptacles, and the point
where they exit from the appliance.
10. Power disconnect - Units have power supplied to the unit whenever the power cord is
inserted into the power source. The power cord plug is the main power disconnect device
for switching off the voltage for the unit.
11. Power sources - Operate the unit only from the type of power source indicated on the
label. Before proceeding, be sure to disconnect the power from the cable to be installed
into the unit.
12. Servicing - Do not attempt to service this unit yourself. Opening or removing covers may
expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
13. Damage requiring service - Unplug the power unit from the main AC power source and
refer servicing to qualified service personnel when any damage to the equipment has
occurred, such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating
instructions.
14. Replacement parts - Be sure the service technician uses replacement parts specified by
the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions could void the warranty and cause fire, electrical shock, or
other hazards.
15. Safety check - Safety checks should be performed upon completion of service or repairs
to the unit to ensure proper operating condition.
16. Installation - Install in accordance with the manufacturer's instructions and in accordance
with applicable local codes.

6en | Safety DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
17. Attachments, changes or modifications - Only use attachments/accessories specified by
the manufacturer. Any change or modification of the equipment, not expressly approved
by Bosch, could void the warranty or, in the case of an authorization agreement, authority
to operate the equipment.
1.2 FCC and UL
FCC statement (USA)
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
– This device may not cause harmful interference.
– This device must accept any interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC suppliers Declaration of Conformity
F.01U.321.914 DDH-3532-200N00 DIVAR hybrid 3000 Recorder
16ch IP, 16ch AN, no HDD
F.01U.321.915 DDN-3532-200N00 DIVAR network 3000
Recorder 32ch, no HDD
F.01U.321.916 DDN-3532-200N16 DIVAR network 3000
Recorder 32ch, 16PoE, no
HDD
F.01U.321.917 DDN-2516-200N00 DIVAR network 2000
Recorder 16ch, no HDD
F.01U.321.918 DDN-2516-200N08 DIVAR network 2000
Recorder 16ch, 8PoE, no HDD
F.01U.321.919 DDN-2516-200N16 DIVAR network 2000
Recorder 16ch, 16PoE, no
HDD
F.01U.321.920 DRH-5532-400N00 DIVAR hybrid 5000 Recorder
16ch IP, 16ch AN, 1.5U, no
HDD

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Safety | en 7
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
F.01U.321.921 DRN-5532-400N00 DIVAR network 5000
Recorder 32ch, 1.5U, no HDD
F.01U.321.922 DRN-5532-400N16 DIVAR network 5000
Recorder 32ch, 16PoE, 1.5U,
no HDD
Responsible party
Bosch Security Systems Inc
130 Perinton Parkway
14450 Fairport, NY, USA
www.boschsecurity.us
UL Disclaimer
Underwriter Laboratories Inc. ("UL") has not tested the performance or reliability of the
security or signaling aspects of this product. UL has only tested fire, shock and/or casualty
hazards as outlined in Standard(s) for Safety for Information Technology Equipment, UL
60950-1 . UL Certification does not cover the performance or reliability of the security or
signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER
REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED
FUNCTIONS OF THIS PRODUCT.

8en | Short information DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
2 Short information
This manual has been compiled with great care and the information it contains has been
thoroughly verified. The text was correct at the time of publication, however, the content can
change without notice. Bosch Security Systems accepts no liability for damage resulting
directly or indirectly from faults, incompleteness or discrepancies between this manual and
the product described.
Therefore Bosch Security Systems recommends using the latest manual published on
www.boschsecurity.com.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
More information
For more information please contact the nearest Bosch Security Systems location or visit
www.boschsecurity.com
http://www.boschsecurity.com/catalog_overview.htm

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 System overview | en 9
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
3 System overview
The recorder can be connected to cameras that use the latest H.264/H.265 high-resolution
video technology and state-of-the-art compression techniques. These advanced technologies,
coupled with efficient network data transmission, deliver the high security and reliability
required for modern surveillance systems.
Simultaneous remote or local monitoring, recording, archiving and playback are guided by
simple menu selections and operator commands. The recorders can be installed with optional
HDDs for video storage; plus a DVD burner for video export.
Notice!
Bosch strongly recommends upgrading to the latest firmware for the best possible
functionality, compatibility, performance and security.
Check http://downloadstore.boschsecurity.com/ regularly to see if there is a new firmware
version available.
Notice!
Bosch strongly recommends you to use https (instead of http) using your own officially
signed certificates for secure communication.

10 en | Installation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
4 Installation
Notice!
Use proper surge suppression on cables that are routed outdoors, or close to large inductive
loads or electrical mains supply cables.
!
Caution!
Installation should only be performed by qualified service personnel in accordance with the
National Electrical Code (NEC800 CECSection60) or applicable local codes.
To get the unit operational, perform the following quick install steps:
1. Carefully unpack the recorder from its shipping packaging – see Unpacking.
2. Make all required hardware connections – see ‘Make Connections’.
3. Power up the system – see Powering Up.
4. Log in – see Login.
5. Correctly configure your system software with the Startup wizard (this appears the first
time the unit is started) – see Startup Wizard.
After completing this initial setup, the system is ready to run and will show a live view of the
camera image(s). If required, you can alter the settings later using the menus and/or factory
defaults, or you can run the Startup wizard again.
4.1 Unpacking
This equipment should be unpacked and handled with care. If an item appears to have been
damaged in shipment, notify the shipper immediately.
Verify that all parts are included. If any items are missing, notify your Bosch Security Systems
Sales or Customer Service Representative.
The original packaging is the safest container in which to transport the unit and can be used if
returning the unit for service.
4.1.1 Package contents
Qty Component
1 Recorder
1 Optical disc containing software licenses and user documentation
2 Power supply cables (120VAC US type; 230VAC Euro type)
1 External power supply adapter (only for DIVAR2000/3000 network (non-PoE)
models and DIVAR3000 hybrid models)
Terminal connector blocks
1 19” mounting set including brackets and screws (only on DIVAR5000 models)
1 Hard disk mounting kit (including SATA cables, brackets and screws)
1 Optical USB mouse
1 IR remote Control with 2 AA (1.5V) batteries
1 Ground screw

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Installation | en 11
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
Qty Component
1 Split cable for loop through to 25-pin D-connector (only for DIVAR5000 hybrid
models)
1 RJ11 adapter cable to connect Bosch Intuikey keyboard (only on DIVAR5000
models)
Installation guides for Recorder, HDD, plus safety instructions
4.2 Make connections
Notice!
Use only PoE approved devices.
1. Connect the cameras to the or connectors.
– If using PoE connector, power is supplied to the camera via the Ethernet cable
compliant with the Power-over-Ethernet standard.
– Use an external switch to connect more cameras to a single RJ45 port.
2. Connect monitor A to the output, or the output.
3. Connect the USB mouse to a USB port (back or front panel).
Optional connections (depending on model)
– On DIVAR models, connect a second dual monitor to the HDMI MON.B (hybrid models) or
HDMI MON.A2 (network 5000 models) connector.
– Connect up to 4 audio signals to the RCA (CINCH) inputs (hybrid models only,
record audio only for analog input1, 2, 3 and 4).
– Connect 1 microphone to the RCA (CINCH) input (audio from the microphone is
only available via the network on the PC where the recorder Web Client is running).
– Connect 1 RCA (CINCH) output from to the monitor or an audio amplifier
(audio out can be: live audio from IP cameras, recorded audio or audio from the PC
where the recorder Web Client is running).
– Connect up to 16 alarm inputs to the connector (via the supplied terminal
blocks) - see description in Hardware setup.
– Connect up to 6 alarm outputs to the connector (via the supplied terminal
blocks) - see description in Hardware setup.
– Connect a pan/tilt/zoom control unit to the (only for hybrid models) - see
description in Hardware setup.
– Connect to your network via the RJ45 ETHERNET connector (use Shielded Twisted
Pair Category 5e cable).
– Connect extra video out cables to the ports if loop through is required to other
devices (only for DIVAR5000 hybrid).
– Connect a Bosch Intuikey keyboard cable to the connector using the supplied
adaptor (only for DIVAR5000) - see description in Hardware setup.
– Connect an eSATA storage device to the connector (only for DIVAR5000).
– Connect the DIVAR to an approved ground point. Use the ground screw (supplied in the
accessory bag) to attach a ground cable to the DIVARback panel ground point .

12 en | Installation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
4.2.1 Back panel connectors DIVAR network 2000/3000 (no PoE)
RJ45 video input for max. 32 IP cameras (max. 16IP cameras
for DIVAR2000) connected via external switch (optional with
DHCP configuration)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 HDMI (Monitor output)
4 screw terminal inputs, cable diameter AWG26‑16
(0.4-1.29mm)
2 screw terminal outputs, cable diameter AWG26‑16
(0.4-1.29mm)
1 RCA (Audio output)
1 RCA (Audio input)
Screw terminal output
DB9 male, 9-pin D-type
One USB (3.0) connector for mouse or USB memory device;
one USB (2.0) also on front panel
Power input with On/Off
switch
12VDC (5A)
AC input adapter: 100~240VAC, 50-60Hz, 1.5A
Ground connection

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Installation | en 13
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
4.2.2 Back panel connectors DIVAR network 2000 (8 PoE)
PoE Max. 8 RJ45 PoE ports (115W; 25.5W max. per port)
connected with DHCP configuration (maximum 16 IP
channels possible)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 HDMI (Monitor output)
4 screw terminal inputs, cable diameter AWG26‑16 (0.4–
1.29mm)
2 screw terminal outputs, cable diameter AWG26‑16 (0.4–
1.29mm)
1 RCA (Audio output)
1 RCA (Audio input)
Screw terminal output
DB9 male, 9-pin D-type (for service)
One USB (3.0) connector for mouse or USB memory device;
One USB (2.0) also on front panel
Power input with On/Off
switch
100~240VAC, 50-60Hz, 3.5A, 190W
Ground connection

14 en | Installation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
4.2.3 Back panel connectors DIVAR network 2000/3000 (16 PoE)
PoE Max. 16 PoE ports (130W; 25.5W max. per port) connected
with DHCP configuration (max. 16 IP cameras for
DIVAR2000; max 32 IP cameras for DIVAR3000)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 HDMI (Monitor output)
4 screw terminal inputs, cable diameter AWG26‑16 (0.4–
1.29mm)
2 screw terminal outputs, cable diameter AWG26‑16 (0.4–
1.29mm)
1 RCA (Audio output)
1 RCA (Audio input)
Screw terminal output
DB9 male, 9-pin D-type
One USB (3.0) connector for mouse or USB memory device;
one USB (2.0) also on front panel
Power input with On/Off
switch
100~240VAC, 50-60Hz, 3.5A, 190W
Ground connection

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Installation | en 15
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
4.2.4 Back panel connectors DIVAR network 5000 (no PoE)
RJ45 video input for max. 32 IP cameras connected via
external switch (optional with DHCP configuration)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 1 HDMI (Monitor output in maximum 4k resolution)
2 1 HDMI (output for spot monitor that supports live
multiscreen); resolution 1080p (1920x1080)
16 screw terminal inputs, cable diameter AWG26‑16
(0.4-1.29mm)
6 screw terminal outputs, cable diameter AWG26‑16
(0.4-1.29 mm)
Screw terminals, cable diameter AWG26‑16 (0.4-1.29mm)
1 RCA (Audio output)
1 RCA (Audio input)
DB9 male, 9-pin D-type (for service)
Two USB (3.0) connectors for mouse or USB memory device;
one USB (2.0) also on front panel
For backup/memory device
Power input with On/Off
switch
100~240VAC, 50-60Hz, 1.9A, 75W
Ground connection

16 en | Installation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
4.2.5 Back panel connectors DIVAR network 5000 (16 PoE)
PoE 16 RJ45 ports (200W; max. 25.5W per port) for connecting
max. 16 PoE cameras connected with DHCP configuration
(max. 32 IP cameras)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 1 HDMI (Monitor output in maximum 4k resolution)
2 1 HDMI (output for spot monitor that supports live
multiscreen); resolution 1080p (1920x1080)
16 screw terminal inputs, cable diameter AWG26‑16
(0.4-1.29mm)
6 screw terminal outputs, cable diameter AWG26‑16
(0.4-1.29mm)
Screw terminals, cable diameter AWG26‑16 (0.4-1.29mm)
1 RCA (Audio output)
1 RCA (Audio input)
DB9 male, 9-pin D-type
Two USB (3.0) connectors for mouse or USB memory device;
one USB (2.0) also on front panel
For backup/memory device
Power input with On/Off
switch
100~240VAC, 50-60Hz, 5A, 350W
Ground connection

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Installation | en 17
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
4.2.6 Back panel connectors DIVAR hybrid 3000
16 BNC for connecting max. 16 analog cameras
Max. 16 IP cameras connected via external switch (if no
analog cameras are connected, an extra 16 IP cameras can
be connected)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 HDMI (Monitor output)
1 HDMI (output for spot monitor that supports live
multiscreen); resolution 1080p (1920x1080)
16 screw terminal inputs, cable diameter AWG26‑16
(0.4-1.29mm)
3 screw terminal outputs, cable diameter AWG26‑16
(0.4-1.29mm)
4 RCA (Audio inputs)
1 RCA (Audio output)
1 RCA (Audio input)
Screw terminal output (Dome control)
DB9 male, 9-pin D-type (Dome control)
One front (2.0) and two rear (3.0) USB connectors for mouse
or USB memory device
Power input with On/Off
switch
12VDC (5A)
AC input adapter: 100~240VAC, 50-60Hz, 1.5A
Ground connection

18 en | Installation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
4.2.7 Back panel connectors DIVAR hybrid 5000
16 BNC for connecting max. 16 analog cameras
Max. 16 IP cameras connected with external switch (if no
analog cameras are connected, an extra 16 IP cameras can
be connected)
RJ45 Ethernet connection (10/100/1000Base-T according to
IEEE802.3)
1 D-SUB (Monitor output)
1 HDMI (Monitor output)
1 HDMI (output for spot monitor that supports live
multiscreen); resolution 1080p (1920x1080)
16 screw terminal inputs, cable diameter AWG26‑16
(0.4-1.29mm)
6 screw terminal outputs, cable diameter AWG26‑16
(0.4-1.29mm)
4 RCA (Audio inputs)
1 RCA (Audio output)
1 RCA (Audio input)
Screw terminal output (Dome control)
Screw terminal output (Keyboard)
D-sub (loop through to other devices)
DB9 male, 9-pin D-type (Dome control)
Two USB (3.0) connectors for mouse or USB memory device;
one USB (2.0) also on front panel
For backup/memory device
Power input with On/Off
switch
100~240VAC, 50-60Hz, 1.9A, 75W
Ground connection
4.2.8 Browser setup
Use a computer with an internet browser to receive live images, control the unit, and replay
stored sequences. The unit can also be configured over the network using the browser.

DIVAR 2000 | DIVAR 3000 | DIVAR 5000 Installation | en 19
Bosch Security Systems B.V. Installation manual 2020-05 | V4.0 | AM18-Q0712
4.3 Powering up
For units with an external power adapter
1. Switch on all equipment connected to unit.
2. Connect the DC power cord of the power adaptor to the 12VDC connector on the unit.
3. Connect the AC power cord to the power adaptor.
4. Connect the power adaptor to an AC power outlet.
5. Turn on the unit power ON/OFF switch on the rear of the unit.
For units with 230VAC input
1. Switch on all equipment connected to unit.
2. Connect the power cable to the unit.
3. Connect the power cable to the AC power outlet.
4. Turn on the unit power ON/OFF switch on the rear of the unit.
4.4 Startup wizard
The Startup Wizard opens automatically when you start your system for the first time. The
wizard will guide you through five setup screens (use the buttons <Default>, <Cancel>,
<Previous>, <Next> to enter values and navigate through the screens):
1. Screen 1
Select your language.
Click <Next>.
2. Screen 2
Assign a User name and password.
The password should at least:
– contain a minimum of 8 characters
– use both uppercase and lowercase characters
– include one or more numerical digits
– include one or more special characters (! ? # $ % = + * -)
3. Optionally, assign a security question and answer (useful if you forget your password).
Click <Next>.
4. Screen 3
Enter the system time and date.
If required, assign the daylight saving time (DST) fields.
Click <Next>.
5. Screen 4
Leave DHCP selected as default to automatically assign the external network details for
the recorder (or) de-select DHCP and assign network details manually.
Optionally scan the QR code to download the mobile app.
Click <Next>.
6. Screen 5
Click <Device search> to search for any connected IP cameras (analog cameras
connected to hybrid recorders and IP cameras connected to PoE ports will be
automatically assigned).
Select the required cameras in the Search list and add by clicking <Add> (or double click
a camera). Selected cameras appear in the Device list (if required select one or more
channels and Authenticate, Modify or Delete any connected cameras in the Device list).
Click <Finished>.
7. The startup wizard is finished, confirm the setup by clicking <OK>.

20 en | Installation DIVAR 2000 | DIVAR 3000 | DIVAR 5000
2020-05 | V4.0 | AM18-Q0712 Installation manual Bosch Security Systems B.V.
Notice!
Use <Cancel> to automatically install all factory defaults and exit the Startup wizard.
4.5 Login
Log in to your recorder by entering your user name and password, then click <OK>.
Use the supplied USB mouse, front panel, remote control or keyboard to input data and
commands.
4.6 Logout/Shutdown
Quick logout
Right-click the mouse to access the Quick menu; and choose the option Logout user.
Shutdown/Logout via Main menu
1. Right-click the mouse to access the Quick menu; from here choose the option Main
menu.
2. Select the Shutdown option on the Main menu.
3. Use the menu to choose from the following options:
Shutdown
Logout (logout user)
Restart (Restart system)
4. Click <OK> to confirm the selection.
Shut down with power button
Another way to shut down the system is to press the power button on the front panel for at
least 3 seconds (the system will automatically backup video recordings and settings).
Start up the system again (and access login screen) by briefly pressing the power button.