3 | Wire an optional wire-in transformer
For systems using an optional wire-in transformer, wire the transformer as shown in
this section.
2 | Installation
Dimensions 16 in. x 16 in. x 3.5 in. (41 cm x 41 cm x 9 cm)
Color B8103-White, D8103-Grey
Compatible tamper switches D110 (P/N: 4998137947) or
ICP-EZTS (P/N: F01U217038)
Compatible locksets (optional) D101-448478D (Key #1358)
D101F-43157D (Key #203)
4 | Specifications
Copyright
This document is the intellectual property of Bosch Security Systems, Inc. and is
protected by copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be
registered trademarks and must be treated accordingly.
Bosch Security Systems, Inc. product manufacturing dates
Use the serial number located on the product label and refer to the Bosch Security
Systems, Inc. website at http://www.boschsecurity.com/datecodes/.
1 | Overview
1
12
2
7
2
4
4
8
5
6
9
10
11
3
This enclosures can be used for residential fire and burglary installations and
commercial burglary applications that do not require attack resistance.
Callout ― Description Callout ― Description
1 ― Point chart label 7 ― Skirt mounting hole
2 ― Module mounting locations (4) 8 ― Battery mounting locations (2)
3 ― Tamper switch mounting location 9 ― Back of the control panel
4 ― Mounting hole locations (5) 10 ― Mounting skirt hook openings (2)
5 ― Mounting skirt hooks (2) 11 ― Screw tab
6 ― Control panel mounting location 12 ― Lockset
2
L N
3
4
USB POWER
STAT US
B
A
S
E
L
I
N
KT
ETHERNETUSB
EARTH GROUND
COMMON
BATTERY (
-
)
+ AUX POWER
BATTERY ( + )
CLASS 2
16.5 VAC 40 VA 60 Hz
TRANSFORMER
10
9
8
7
6
5
4
3
2
1
WARNING!
Multi-Battery
installation requires
Model D122 or D122L
Dual Battery Harness.
Improper installation
can be a fire hazard
.
Low 12.1 VDC
Load Shed 10.2 VDC
OUTPUT
B (2)
OUTPUT
A (1)
OUTPUT
C (3)
1
Callout ― Description
1 ― Low voltage AC
2 ― Ground wire connection
3 ― AC IN
4 ― Wire tie the AC IN wires to the enclosure lance
