Bosch MUC6 Series User manual

Register your new Bosch now:
www.bosch-home.com/welcome
MUC6...RU
MUC8...RU
en Instruction manual
ru Инструкция по эксплуатации
uk Інструкція з експлуатації
MUC6-8_RU_8001018000.indb 1 16.07.2015 12:14:53

A
1 32 4 5
6
8
19
11 12
21
23
24
22
20
109
7
18
14 1715 1613
en English 2
ru Pycckий 27
uk Українська 57
Register your new Bosch now:
www.bosch-home.com/welcome
B
C
25
29* 30
31 32
27 28 26
cb d e
g
f
h
i
j
a
MUC6-8_RU_8001018000.indb 2 16.07.2015 12:14:56

A
1 32 4 5
6
8
19
11 12
21
23
24
22
20
109
7
18
14 1715 1613
Register your new Bosch now:
www.bosch-home.com/welcome
B
C
25
29* 30
31 32
27 28 26
cb d e
g
f
h
i
j
a
MUC6-8_RU_8001018000.indb 3 16.07.2015 12:14:59

2
en
Intended use
Table of contents
Intended use
Please read and follow the operating instructions carefully and
keep them for later reference. Enclose these instructions when
you give this appliance to someone else.
If the instructions for correct use of the appliance are not observed,
the manufacturer’s liability for any resulting damage will be
excluded.
This appliance is designed for the preparation of normal household
quantities in the home, or in household-like, non-commercial envi-
ronments. Household-like environments include staff kitchens in
shops, ofces, agricultural and other small businesses or for use
by guests at bed-and-breakfast establishments, small hotels and
similar residential facilities.
The appliance is suitable for cooking with steam pressure, cooking,
baking, roasting, braising, steam-cooking, frying, pasteurising and
heating up food, as well as keeping food warm. It must not be used
for processing other substances or objects.
All ingredients must be hygienically faultless. During handling, the
rules of kitchen hygiene must be observed.
Only use the appliance with original parts and accessories. Only use
the pan and the accessories with the basic appliance.
Congratulations on the purchase of your
new Bosch appliance.
On the following pages of these operating
instructions, you will nd useful information
for safe use of this appliance.
We request that you read these operating
instructions carefully and observe all
instructions. This ensures that you will be
able to enjoy this appliance for a long time
and the results of your work will be an
endorsement of your decision to purchase
this appliance.
Retain these operating instructions for
subsequent use or for the next owner.
You can nd further information about our
products on our website.
Intended use...............................................2
Safety instructions ......................................3
Overview.....................................................5
Control panel ..............................................5
Before using for the rst time......................7
Steam pressure function.............................9
Preparation...............................................10
Additional functions ..................................15
Using inserts.............................................16
Customised setting options ......................18
Childproof lock..........................................20
Care and daily cleaning............................21
Disposal....................................................22
Guarantee.................................................22
List of preparation programmes................22
Model overview and technical data ..........23
Special accessories..................................24
Troubleshooting........................................24
MUC6-8_RU_8001018000.indb 2 16.07.2015 12:14:59

3
en
Safety instructions
Only use the appliance indoors at room temperature and up to
2000 m above sea level. When installing the appliance, ensure that
there are no sensitive surfaces and appliances above and behind
the appliance that may be damaged by the temperature development
and the escaping steam.
This appliance can be used by persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge
if they have been given supervision or instruction concerning use
of the appliance in a safe way and if they understand the hazards
involved. Keep children away from the appliance and connecting
cable and do not allow them to use the appliance. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children.
Safety instructions
WWarning
Danger of electric shock and re!
The appliance may only be connected to a power supply with alter-
nating current via a correctly installed socket with earthing. Ensure
that the protective conductor system of the domestic supply has
been correctly installed.
Connect and operate the appliance only according to the type
plate specications. Use only if power cord and appliance show no
signs of damage. To avoid potential hazards, repairs must only be
carried out by our customer service personnel. If the supply cord is
damaged, it must be replaced by a special cord or assembly availa-
ble from the manufacturer or its service agent.
Do not connect the appliance to or operate it by means of a time
switch or remote control socket. Never leave the appliance unat-
tended while it is switched on! Should a fault occur, pull the plug or
disconnect from the mains immediately. The mains cable must not
come into contact with hot parts or be pulled across sharp edges.
Never immerse the appliance or mains cable in water or place it in
the dishwasher! Unplug the appliance before cleaning it.
MUC6-8_RU_8001018000.indb 3 16.07.2015 12:14:59

4
en
Safety instructions
WWarning
Risk of burns!
The appliance uses steam pressure for cooking. Before using the
appliance, check working order of the safety devices (valves and
seals). Never interfere with safety systems except for care and daily
cleaning. Do not use the appliance to fry food with oil under pres-
sure. During operation, the appliance must never be used without
the pan inserted. Before starting a preparation programme, check
whether the appliance was properly closed. The housing, pan and
metallic components heat up while the appliance is in use! The pan
and the accessories may only be removed using the tools provided.
Use oven gloves. Hot steam is generated in the appliance. Do not
lean over the appliance.
Do not move the appliance when it is under pressure. Do not open
the appliance until the internal pressure has completely levelled off.
Never use force to open the appliance! Open the lid with care. Only
transport or clean the appliance once it has fully cooled down! Parts
that show visible discolouration, cracks or other damage or are not
seated correctly must be replaced with original spare parts.
WWarning
Risk of suffocation!
Do not allow children to play with packaging material.
MUC6-8_RU_8001018000.indb 4 16.07.2015 12:14:59

5
en
Overview
Overview
XFigure A
1 Multi cooker with steam pressure
function (basic appliance)
2Lid
3Control panel
4Pressure locking handle
5 Steam release button
6Removable steam outlet
7 Removable condensation tank
8Opening button for the lid
9Pan with non-stick coating
10 Pan handles
11 Mains connection
12 Carrying handle
13 Removable lid insert
14 Sealing ring
15 Safety valve
16 Steam valve
17 Overpressure protection
18 Mount for lid insert
19 Fastening screw
20 Steam release chamber
21 Steam valve opening with seal
22 White steam release lever
23 Valve plug
24 Manual unlocking for overpressure
protection
XFigure B
25 Deep frying basket with removable
handle*
26 Steamer insert, 2-part
27 Spatula
28 Ladle
29 Measuring beaker*
30 Mains cable
31 Operating instructions
32 Recipe book
* Depending on the model
The operating instructions refer to different
models of the appliance.X“Model over-
view and technical data” see page 23
Control panel
XFigure C
The control panel consists of controls
(buttons) and indicators (LEDs). The
buttons can be used to select the individual
preparation programmes and adopt the
different setting options (e.g. selection
of steam pressure function, preparation
temperature and time). The settings are
indicated via the illuminated LEDs and/or
the display.
Controls
BStandby
Switches from standby mode to func-
tion selection mode and back again.
ASet the start time delay
The start time delay can be set for
the selected preparation programme.
DSelect a preparation programme
from the list (h)
The individual preparation pro-
grammes are displayed one after
another by repeatedly pressing
button D. The corresponding LED
lights up in the control panel.
EAdjust the preparation time
The pre-congured preparation time
[ средняя ] (medium) for a prepara-
tion programme can be shortened
[
короткая ] or lengthened [ длинная ].
The corresponding indicator (g) lights
up. The corresponding pre-congured
preparation duration is shown in the
display (a).
FSet a customised preparation time
For customised adjustment of the
preparation time.
CSet a customised preparation
temperature
For customised adjustment of the
preparation temperature. For prepa-
ration programmes with enabled
steam pressure function, the temper-
ature is pre-congured (f) and cannot
be adjusted individually.
MUC6-8_RU_8001018000.indb 5 16.07.2015 12:14:59

6
en
Control panel
LSteam pressure function
By pressing the Lbutton, the steam
pressure functions “low steam pres-
sure” [
K ] or “high steam pressure”
[
L ] are selected. The respective
indicators (f) light up. X“Steam
pressure function” see page 9
GConrm the programme
Pressing button Gstarts the
selected preparation programme.
HDelete a setting or abort the
programme
Pressing button Hdeletes the set-
tings or stops a programme that was
previously started.
Indicators
a Display
Display of the remaining time or the
temperature.
b таймер (Timer)
Indicates that the start time delay is
enabled. The display (a) shows the time
until the start of the selected preparation
programme.
c Preparation steps /
programme progress
Display of the individual preparation
steps and the programme progress. In
the case of multiple preparation steps
(e.g. the ingredients are added after
heating the deep frying oil), these are
visually indicated by the illumination of
LEDs 1, 2, 3 or 4. An audible signal also
sounds if a subsequent preparation step
is required.
d готово (ready)
This indicates that the meal is ready.
The display (a) ashes and shows
“00:00”. An audible signal also sounds.
e подогрев (keep warm)
Indicates that the keep warm function is
switched on at the end of a preparation
programme. A rectangle lights up in the
display (dotted line).
f Steam pressure function
[ K ] shows that low steam pressure
(105°C) is selected.
[
L ] shows that high steam pressure
(115°C) is selected. X“Steam pressure
function” see page 9
g Display of the pre-congured
preparation time
The pre-congured preparation time
[
средняя ] (medium) for a prepara-
tion programme can be shortened
[ короткая ] or lengthened [ длинная ]
using button E. The corresponding
indicator lights up.
h List of preparation programmes
There are 16 pre-congured preparation
programmes available. The individual
preparation programmes are displayed
one after another by repeatedly pressing
button D. The corresponding LED lights
up in the control panel.
i рецепт 1&2 – Recipe 1&2
Memory locations to store individual
preparation programmes with steam
pressure function, preparation time and
temperature.
j мой режим – My mode
Quick setting mode for customising the
steam pressure function, preparation
time and temperature setting for a
cooking process.
MUC6-8_RU_8001018000.indb 6 16.07.2015 12:14:59

7
en Before using for the  rst time
Before using for
the  rst time
Before the new appliance can be used,
this must be fully unpacked, cleaned and
connected to the power outlet. To do this,
perform the following steps:
1. Remove the appliance and all accessory
parts from the packaging.
2. Use the carrying handle to lift up the
appliance. Swing the carrying handle
upwards accordingly.
Warning!
You must use only the carrying handle for
safe transport of the appliance.
3. Place the appliance on a stable, level
and smooth work surface.
Warning!
There must be no sensitive surfaces and
appliances above and behind the appliance
that may be damaged by the temperature
development and the escaping steam.
4. Remove the steam outlet
Grip the steam outlet at the rear and pull
up and off.
5. Remove valve plug
Pull off the valve plug in the steam
release chamber.
6. Open appliance lid
Open the pressure locking handle (M).
For this purpose, rotate the pressure
locking handle as far as possible in
an anti-clockwise direction. Press the
opening button on the base appliance to
open the lid.
7. Lift the pan out of the appliance interior.
MUC6-8_RU_8001018000.indb 7 16.07.2015 12:15:01

8
en Before using for the  rst time
8. Remove the lid insert
Turn the fastening screw anti-clockwise
and remove it. Use one hand to keep
the lid insert in position on the inside
of the lid. Use the other hand to push
the steam valve in the steam release
chamber through the opening on the
outside of the lid by applying slight
pressure. Carefully remove the lid insert
from the lid.
9. Remove the packaging material that
is on the appliance and the accessory
parts.
10. Check all parts for completeness.
XFigure A/ B
11. Check the appliance and the accessory
parts for visible damage.
Warning!
Never operate a damaged appliance!
12. Thoroughly clean and dry all parts
before using for the  rst time. X“Care
and daily cleaning” see page 21
13. Check safety devices
Lid insert: Check the sealing ring on the
lid insert for visible discolouring, cracks
or other damage.
Check that the safety and steam valve
as well as the overpressure protection
are clean. They must not be blocked
by foreign bodies. The overpressure
protection must be able to move freely.
Steam release chamber: Check the
steam valve seal in the steam release
chamber for visible discolouring, cracks
or other damage. Check that the white
steam release lever is clean. It must not
be blocked by foreign bodies.
14. Insert pan
Reinsert the pan in the appliance inte-
rior. The pan handles must be sunk into
the indentations.
Warning!
Before inserting the pan, check that the
appliance interior is dry and clean.
15. Place lid insert
The pressure locking handle must be
opened (M). Place the lid insert on the
lid insert mount with the steam valve at
the bottom. At the same time, guide the
steam valve through the steam valve
opening. Tighten the fastening screw for
the lid insert clockwise on the lid insert
mount.
16. Close the lid
Press the lid down until it clicks into
place. Close the pressure locking
handle (N). For this purpose, rotate
the pressure locking handle as far as
possible in clockwise direction.
17. Insert valve plug
Place the valve plug in the steam
release chamber on the steam valve
and press it down.
Warning!
Make sure that the white steam release
lever is positioned below the valve plug.
MUC6-8_RU_8001018000.indb 8 16.07.2015 12:15:03

9
enSteam pressure function
18. Insert the steam outlet
Place the steam outlet onto the lid from
above and press down  rmly.
19. Insert condensation water tank
Fold up the carrying handle. Hold the
tank on the sides at the top and insert at
the rear of the appliance.
20. Connect the supplied mains cable to
the appliance  rst, then connect it to the
socket.
Warning!
Use only the supplied mains cable.
On the control panel, buttons Band G
and all LEDs brie y light up once and a  ve-
level audible signal sounds. Button Bthen
 ashes. The appliance is in standby mode
and is ready for operation.
Steam pressure function
The multi cooker is additionally equipped
with a steam pressure function. With the
steam pressure function, the food cooks
under pressure, i.e. at temperatures above
100°C. This signi cantly reduces the
cooking time. In addition, this represents
a signi cant energy saving. Aroma, taste
and vitamins are largely preserved with the
short cooking time under steam.
There are 8 pre-con gured preparation
programmes to choose from, which can
be used with the steam pressure function.
X“List of preparation programmes” see
page 22
Low steam pressure
Use low steam pressure for the preparation
of delicate food like vegetables,  sh or
fruit to cook the food particularly gently.
Pressure that is too high is automatically
controlled via the steam outlet.
High steam pressure
Use high steam pressure for the preparation
of all other food to achieve optimum results.
Pressure that is too high is automatically
controlled via the steam outlet.
Steam pressure function activated
To be able to select preparation pro-
grammes with steam pressure function,  rst
of all the pressure locking handle must be
closed (N). For this purpose, rotate the
pressure locking handle as far as possible
in a clockwise direction.
MUC6-8_RU_8001018000.indb 9 16.07.2015 12:15:05

10
en Preparation
An audible signal is emitted when the
appliance is correctly closed and the
steam pressure function is switched on.
The respective preparation programme
with steam pressure function can only
be selected then in the function selection
mode. The indicators “low steam pressure”
[ K ] or “high steam pressure” [ L ] light up.
X“Preparation with steam pressure” see
page 11
Steam pressure function deactivated
To be able to select preparation pro-
grammes without steam pressure function,
the pressure locking handle must always be
opened (M). For this purpose, rotate the
pressure locking handle as far as possible
in an anti-clockwise direction.
The desired preparation programmes
can be selected in the function selection
mode without steam pressure function.
X“Preparation without steam pressure”
see page 13
Preparation
General recommendations
For the best and tastiest results, we recom-
mend using the suggestions in our recipe
book, which was specially developed for
use with the appliance.
The recipe book features detailed informa-
tion on the required quantities of ingredi-
ents, recommendations for the preparation
time and the preparation temperature,
use of the steam pressure function and
smart combinations of the preparation
programmes.
Use these recipe recommendations in order
to gain initial experience. Once you appre-
ciate the bene ts and the variety of the
usage options, you will enjoy experimenting
with new recipes. Use the individual setting
options for this that the appliance addition-
ally provides. Cross-reference individual
setting options
To provide you with an overview of all
preparation programmes, we have compiled
this information in a clearly arranged table.
X“List of preparation programmes” see
page 22
W Warning
Risk of burns!
■Before using the appliance, check
working order of the safety devices
every time. X“Before using for
thefirsttime”seepage7
■During operation, the appliance must
never be used without the pan, lid insert,
valve plug and steam outlet inserted.
■Never move the appliance during
operation.
■Never use force to open the appliance!
Warning!
■Use only the spatula provided for stirring
(do not use metal cutlery).
■Each time prior to operation, check the
appliance for damage, completeness,
cleanliness and proper installa-
tion.X“Beforeusingforthefirsttime”
seepage7
MUC6-8_RU_8001018000.indb 10 16.07.2015 12:15:06

11
en
Preparation
Preparation with steam pressure
There are 8 pre-congured preparation
programmes to choose from, which can
be used with the steam pressure function.
X“List of preparation programmes” see
page 22
W Warning
Risk of burns!
■Frothy ingredients like milk and cream
must not be heated up under steam
pressure.
■Do not use the steam pressure function
to deep fry food with oil under pressure.
1. Open the appliance. Open the pressure
locking handle (M) and press the
opening button on the base appliance
for this purpose.
2. Fill the pan with the desired ingredients.
The measuring scale on the inside of
the pan can also be used to read the
quantity.
Warning!
■Never heat up the appliance under
steam pressure without having added
water or other liquids beforehand. Add
at least 250 ml of water.
■ Do not ll the pan beyond the marking
[
3.5 ] !
■If food is prepared that expands during
cooking, ll the pan up to a maximum
as described in the recipe suggestions.
(For example rice: maximum of 800 g).
XSee recipe book provided
3. Close the appliance. Press the lid down
for this purpose until it clicks into place
and close the pressure locking handle
(N).
An audible signal sounds. The steam
pressure function is switched on.
4. Press button Bin order to access the
function selection mode.
The desired preparation programme is
selected in the function selection mode and
all settings of the appliance are made. The
Bbutton lights up permanently as well as
the indicators [ мой режим ] (My mode) and
[
K ]. Button G ashes. “00:00” is shown in
the display.
Note: If no input is made on the control
panel within 5 minutes, the appliance auto-
matically switches to standby mode.
5. Keep pressing button Duntil the
desired preparation programme is
selected.
The corresponding LED lights up in the
control panel and the pre-congured prepa-
ration time for the selected preparation pro-
gramme ashes. The indicator “low steam
pressure” [ K ] or “high steam pressure”
[ L ] lights up. Press the Lbutton to toggle
between [ K ] and [ L ] .
Note: If [ K ] or [ L ] does not light up, the
steam pressure function is not available for
the selected programme.
MUC6-8_RU_8001018000.indb 11 16.07.2015 12:15:06

12
en
Preparation
6. Press button Gto start the preparation
programme.
The appliance heats up the pan until the
pre-congured steam pressure is reached.
During the heating phase, lines that light
up in a clockwise direction appear in the
display.
Once the pre-congured steam pressure is
reached, the lines go out and the prepara-
tion time is shown in the display.
The preparation process starts automati-
cally. The preparation time counts down.
Once the preparation time is completed, an
audible signal sounds, the display ashes
and shows a “P”. Steam automatically
escapes from the appliance intermittently
to reduce the pressure in the appliance
interior.
W Warning
Risk of burns!
Never bend over the appliance while steam
is escaping from it!
When the pressure in the appliance interior
has completely levelled off, the indicator
[ готово ] (ready) and the Gbutton light up
and the Keep warm function is activated.
X“Keep warm function” see page 16
A rectangle lights up in the display (dotted
lines). The preparation programme is
completed.
7. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
base appliance for this purpose.
Notes:
■Never use force to open the appliance!
■Always shake the appliance gently
before opening, in order to dissolve any
steam bubbles that may have formed in
the food and to prevent blocking.
■The pressure locking handle can be
easily opened when the steam has
completely escaped from the appliance
interior and the appliance is fully
depressurised.
■The automatic steam release can take
some time. In order to accelerate the
process and if the appliance is not com-
pletely depressurised, the steam can
also be released manually. X“Release
steam manually” see page 13
8. Serve the prepared meal.
W Warning
Risk of burns!
■The pan and any inserts that are used
may be very hot. Always use corre-
sponding handles or oven gloves.
Warning!
Condensation is formed during cooking.
Empty the condensation tank regularly.
Notes:
■The preparation programme can be
stopped at any time using button H.
The appliance subsequently switches
to function selection mode. Before the
appliance can be opened, the steam in
the appliance interior must be released
manually. X“Release steam manually”
see page 13
■Certain preparation programmes consist
of several preparation steps. X“Multi-
ple preparation steps” see page 15
MUC6-8_RU_8001018000.indb 12 16.07.2015 12:15:07

13
en
Preparation
Release steam manually
Steam can also be released manually in the
following cases:
■If automatic steam release is to be
accelerated at the end of a preparation
programme.
■If a preparation programme was
cancelled.
■If the pressure locking handle cannot
be opened because the appliance is not
completely depressurised.
W Warning
Risk of burns!
When pressing the steam release button,
hot steam escapes from the steam outlet
under high pressure. Never bend over the
appliance while the steam release button is
being pressed!
1. Keep the steam release button pressed
until no more steam escapes from the
steam outlet.
2. Open the appliance. Open the pressure
locking handle for this purpose (M)
and press the opening button on the
base appliance for this purpose.
Note: If the pressure locking handle cannot
be opened, the appliance is not completely
depressurised. In this case, manually
depress the overpressure protection using
a thin pin until no more steam escapes
from the appliance. Then open the pressure
locking handle (M) and press the opening
button on the base appliance.
Preparation without steam
pressure
There are 16 pre-congured prepara-
tion programmes available to choose
from.X“List of preparation programmes”
see page 22
Note: When selecting and starting the
preparation programme without steam pres-
sure function, make sure that the pressure
locking handle is open at all times (M).
1. The appliance is ready to use. Fill the
appliance with the desired ingredients.
To do this, open the lid and pour the
ingredients into the pan. The measuring
scale on the inside of the pan can also
be used to read the quantity.
Warning!
■ Do not ll the pan beyond the marking
[
4.0 liter]!
2. Close the appliance. Press the lid down
for this purpose until it clicks into place.
3. Press button Bin order to access the
function selection mode.
The desired preparation programme is
selected in the function selection mode
and all settings of the appliance are
made. Button Bas well as the indicator
[ мой режим ] (My mode) lights up perma-
nently. Button G ashes. “00:00” is shown
in the display.
Notes:
■Certain preparation programmes or
steps are carried out with the lid open.
XSee recipe book provided
■If no input is made on the control panel
within 5 minutes, the appliance auto-
matically switches to standby mode.
1. Keep pressing button Duntil the
desired preparation programme is
selected.
MUC6-8_RU_8001018000.indb 13 16.07.2015 12:15:08

14
en
Preparation
The corresponding LED lights up in the
control panel and the pre-congured prepa-
ration time for the selected preparation
programme ashes.
2. Press button Gto start the preparation
programme.
The appliance heats up the pan until the
target temperature is reached. During the
heating phase, lines that light up in a clock-
wise direction appear in the display.
Once the target temperature is reached,
the lines go out and the preparation time is
shown in the display.
The preparation process starts
automatically.
Note: when the programme [
паста ] (pasta)
or [ фритюр ] ( deep frying) is selected, a
repeating audible signal is emitted and the
display and button G ash until the food
has been added and button Ghas been
pressed.
The preparation time counts down.
Steam is created during cooking which
escapes from the appliance to avoid excess
pressure to build.
Increasing or reducing the temperature
If the current temperature was set too high
or too low during the preparation, this can
be increased (by +10°C max.) or decreased
(by -10°C max.) accordingly during the
cooking process.
To increase the temperature, press and
hold the C button. The current temperature
will briefly be shown on the display and will
then increase in 1°C increments until the
maximum value is reached (+10°C). Press
and hold the button until the temperature is
at the increased level desired.
To reduce the temperature, press and hold
the C button. The current temperature will
briefly be shown on the display and will
initially increase in 1°C increments until the
maximum value is reached (+10°C). Once
the maximum value has been reached, the
display will jump back to the minimum value
(20°C lower). Press and hold the button
until the temperature is at the reduced level
desired.
To continue with the preparation
programme,.press the Gbutton.
Note: If the G button is not pressed, the
preparation programme will continue with
the temperature that was previously set.
When the preparation programme ends,
an audible signal sounds and the indicator
[ готово ] (ready) and button Glight up,
or the Keep warm function is activated.
X“Keep warm function” see page 16
The display ashes and shows “00:00”.
3. Open the lid of the appliance and serve
the meal that has been prepared.
W Warning
Risk of burns!
■During preparation, large amounts of
steam accumulate in the appliance.
Always open the lid with care. Do not
lean over the lid of the appliance.
■The pan and any inserts that are used
may be very hot. Always use corre-
sponding handles or oven gloves.
MUC6-8_RU_8001018000.indb 14 16.07.2015 12:15:08

15
en
Additional functions
Warning!
Condensation is formed during cooking.
Empty the condensation tank regularly.
Notes:
■The preparation programme can be
stopped at any time using button H.
The appliance subsequently switches to
function selection mode.
■Certain preparation programmes can
consist of several preparation steps.
X“Multiple preparation steps” see
page 15
Additional functions
The following additional functions are avail-
able for preparation programmes with and
without steam pressure function.
Selecting a pre-congured
preparation time
The pre-congured preparation time of
the level [
средняя ] (medium) is shown
on the control panel for each preparation
programme.
The preparation time can be shortened
[
короткая ] or lengthened [ длинная ].
1. Keep pressing button Euntil the
desired indicator is lit. The display
changes from [
средняя ] (medium)
to [ длинная ] (longer) and then to
[ короткая ] (shorter) before returning to
[ средняя ] (medium).
The corresponding pre-congured values
for the preparation time are shown in the
display.
2. Press button Gto start the preparation
programme.
Setting a start time delay
The start time delay can be set for the
selected preparation programme so you
can enjoy a freshly prepared meal at a
specic time.
Note: the start time delay can only be
set for certain preparation programmes.
The pre-congured start time delay varies
among these preparation programmes.
1. Select the preparation programme.
2. Press button A. Button G ashes.
“00:10” ashes in the display.
Press button Arepeatedly to increase the
displayed time. A brief press increases the
time by 5 minutes. A slightly longer press
increases the time by 10 minutes. Pressing
and holding button Afor around 2 seconds
increases the time by 30 minutes.
3. Press button Gwhen the desired start
time delay is displayed.
The desired start time delay is shown in the
display. [ таймер ] (timer) lights up in the
display.
The time until the start counts down. Once
this time has elapsed, the preparation
process starts automatically.
Notes:
■The start time delay can be switched
off at any time by pressing button G.
The preparation programme then starts
immediately.
■ If “00:10” does not ash in the display,
a start time delay cannot be set for the
selected preparation programme.
Multiple preparation steps
Certain preparation programmes can
consist of several preparation steps. An
audible signal sounds once the next step is
required. In the control panel, LEDs 1, 2, 3
or 4 are shown accordingly and button G
ashes.
1. Open the lid of the appliance.
2. Add additional ingredients.
3. Depending on the recipe, refer to the
preparation method (e.g. with or without
steam pressure function, open lid).
XSee recipe book provided
4. Start the next preparation step using
button G.
MUC6-8_RU_8001018000.indb 15 16.07.2015 12:15:08

16
en
Using inserts
The appliance heats up the appliance
interior until the target temperature or
the selected steam pressure of the next
preparation step is reached. During the
heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature or selected
steam pressure is reached, the lines go out
and the next preparation time is shown in
the display. The preparation process starts
automatically. The preparation time counts
down.
Prematurely terminating the
current preparation step
If the ingredients are cooked ahead of time
during one of the preparation steps, the
step can also be terminated manually.
1. To do this, press the Gbutton for at
least 2 seconds.
This will terminate the current preparation
step. An audible signal will then sound as
usual once the next step can be carried out.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button G ashes.
2. Perform the next preparation step.
Keep warm function
Certain preparation programmes include
the keep warm function. X“List of prepara-
tion programmes” see page 22
If the preparation programme features the
keep warm function, this is switched on
automatically once the dish is ready and
keeps the dish warm for up to 10 hours
at 40°C (pre-congured keep warm time
depending on the preparation programme).
[
готово ] (ready) and [ подогрев ] (keep
warm) light up. A rectangle lights up in
the display (dotted lines). The keep warm
function can be ended using button H. The
appliance subsequently switches to function
selection mode.
Extending the preparation time
If the ingredients are not yet fully cooked
shortly before the end of a preparation
programme, the preparation time can be
extended.
1. To do this, press and hold the Fbutton.
The current preparation time will briefly be
shown on the display and will then increase
in 1-minute increments.
2. Press and hold the button until the
desired preparation time has been
reached.
3. Activate the newly set preparation time
using the Gbutton.
Note: If the desired preparation time is
exceeded because the Fbutton was held
down for too long, do not conrm the new
setting. Wait for a moment until the current
preparation time is displayed again and
then repeat the process.
Using inserts
Using the deep frying basket
It is necessary to use the deep frying
basket (depending on the model) in order to
prepare meat, sh, chips, etc. in hot oil.
Note: For the best and tastiest results, we
recommend using the suggestions in our
recipe book. XSee recipe book provided
Example: Preparation programme
[ фритюр ] (deep fry)
W Warning
Risk of burns!
■Never use the steam pressure function
during deep frying. It is automatically
disabled for the preparation programme
[
фритюр ] (deep fry).
■Fill with oil or deep-frying fat up to the
mark [ 1.0 I ] at maximum.
■Do not use more than 200 g of frozen
food or 300 g of non-frozen food for
deep frying.
MUC6-8_RU_8001018000.indb 16 16.07.2015 12:15:08

17
en
Using inserts
■During preparation, large amounts of
steam may accumulate in the appliance.
Open the lid with care. Do not lean over
the lid of the appliance.
■The pan and any inserts that are used
may be very hot. Always use pan tongs,
corresponding handles or oven gloves.
1. Open the lid of the appliance.
2. Fill the pan with a maximum of 1 litre of
oil. The measuring scale on the inside
of the pan can also be used to read the
quantity.
3. Close the lid.
4. In function selection mode, select the
preparation programme [ фритюр ]
(deep frying) X“List of preparation
programmes” see page 22
5. Press button Gto start the preparation
programme.
The oil is heated. Once the target
temperature is reached, an audible signal
sounds and button G ashes.
6. Fill the deep frying basket with food for
deep frying.
7. Open the lid of the appliance.
8. Place the deep frying basket in the pan
using the handle supplied and remove
the handle.
9. Close the lid of the appliance.
Note: certain preparation programmes
or steps are carried out with the lid open.
XSee recipe book provided
10. Press button Gto start the preparation
programme.
Once the preparation programme ends, an
audible signal sounds.
11. Open the lid of the appliance.
12. To drain the deep-fried food, lift up the
deep frying basket using the handle and
hang on the edge of the pan using the
ange.
Using the steamer insert
It is necessary to use the steamer insert for
the purpose of steam-cooking vegetables,
meat and sh. The 2-part steamer insert
enables different ingredients to be steamed
separately at the same time (e.g. vegeta-
bles in the bottom part and sh in the top
part).
Notes:
■For the best and tastiest results, we
recommend using the suggestions in
our recipe book.
■The steamer insert can be used with
and without steam pressure function.
Example: Preparation programme
[
пароварка] (steam) without steam
pressure function
W Warning
Risk of burns!
■ Fill with water up to the mark [ 0.5 J ] at
maximum.
■During preparation, large amounts of
steam may accumulate in the appliance.
Open the lid with care. Do not lean over
the lid of the appliance.
■The pan and any inserts that are used
may be very hot. Always use corre-
sponding handles or oven gloves.
1. Open the lid of the appliance.
2. Fill the pan with a maximum of 0.5 litres
of water. The measuring scale on the
inside of the pan can also be used to
read the quantity.
3. Hang the bottom part of the steamer
insert in the pan.
4. For steam-cooking different ingredients,
ll the bottom part up to the lower edge.
MUC6-8_RU_8001018000.indb 17 16.07.2015 12:15:09

18
en
Customised setting options
5. Position the top part and add additional
ingredients.
6. Close the lid.
7. In function selection mode, select the
preparation programme [
пароварка]
(steam) X“List of preparation pro-
grammes” see page 22
8. Press button Gto start the preparation
programme.
Once the preparation programme ends,
an audible signal sounds and button G
ashes.
9. Open the lid of the appliance.
10. Lift the top part and the bottom part of
the steamer insert out of the pan.
Customised setting options
The pre-congured values for the prepara-
tion time and the preparation temperature
or steam pressure can be adapted to indi-
vidual needs and the recipe guidelines.
Setting the preparation time
1. In function selection mode, keep
pressing button Duntil the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-congured prepa-
ration time for this preparation programme
is shown.
2. Press button Fonce.
The pre-congured preparation duration
ashes in the display.
3. Keep pressing button Funtil the desired
preparation time is displayed.
When button F is briey pressed, the
preparation time is increased by 1 minute.
The time increases up to the pre-congured
maximum value and then returns to the
pre-congured minimum value. When
button Fis pressed for a longer period,
the preparation time is increased by
10 minutes.
4. Once the desired preparation time is
displayed, press button G.
The preparation programme with the set
preparation time is started.
If the time needs to be adjusted individually
for all preparation steps in a selected pro-
gramme, then repeat points 2 to 4 prior to
starting the respective preparation step.
Note: these settings are not saved. If this
preparation programme is selected again,
the pre-congured preparation time will be
shown in the display once more.
Setting the preparation
temperature
For preparation programmes without steam
pressure function, the temperature can be
selected individually.
1. In function selection mode, keep
pressing button Duntil the desired
preparation programme is selected.
The corresponding LED lights up in the
control panel and the pre-congured prepa-
ration time for this preparation programme
is shown.
2. Press button Conce.
The pre-congured preparation temperature
ashes in the display.
3. Keep pressing button Cuntil the desired
preparation temperature is displayed.
When button C is briey pressed, the prepa-
ration temperature is increased by 5°C. The
temperature increases up to the pre-con-
gured maximum value and then returns
to the pre-congured minimum value.
When button Cis pressed for a slightly
longer period, the temperature is increased
by 10°C.
MUC6-8_RU_8001018000.indb 18 16.07.2015 12:15:10