Bosch GLM 30 User manual

Robert Bosch GmbH
Power Tools Division
70745 Leinfelden-Echterdingen
Germany
www.bosch-pt.com
1 609 92A 0LG (2014.04) I / 354 XXX
GLM 30 Professional
de Originalbetriebsanleitung
en Original instructions
fr Notice originale
es Manual original
pt Manual original
it Istruzioni originali
nl Oorspronkelijke gebruiksaanwijzing
da Original brugsanvisning
sv Bruksanvisning i original
no Original driftsinstruks
fi Alkuperäiset ohjeet
el Πρωτότυπο οδηγιών χρήσης
tr Orijinal işletme talimatı
pl Instrukcja oryginalna
cs Původní návod k používání
sk Pôvodný návod na použitie
hu Eredeti használati utasítás
ru Оригинальное руководство по
эксплуатации
uk Оригінальна інструкція з
експлуатації
kk Пайдалану нұсқаулығының
түпнұсқасы
ro Instrucţiuni originale
bg Оригинална инструкция
mk Оригинално упатство за работа
sr Originalno uputstvo za rad
sl Izvirna navodila
hr Originalne upute za rad
et Algupärane kasutusjuhend
lv Instrukcijas oriģinālvalodā
lt Originali instrukcija
cn 正本使用说明书
tw 原始使用說明書
ko 사용 설명서 원본
ar
fa
ςТЎϩХʉ ЌТϾϦφЍʉ ʌμВТЎϺυ
ΖЎϩʉ ˒μВЖЙʉʓ ИͳϞφЁʑ
OBJ_BUCH-2004-004.book Page 1 Monday, April 28, 2014 11:41 AM

1 609 92A 0LG | (28.4.14) Bosch Power Tools
3|
2
6
5
4
3
1
87
GLM 30
c
b
a
d
e
f
gh
OBJ_BUCH-2004-004.book Page 3 Monday, April 28, 2014 11:36 AM

1 609 92A 0LG | (28.4.14) Bosch Power Tools
4|
1,95 m
0,5 m
1
1.
2.
B
A
OBJ_BUCH-2004-004.book Page 4 Monday, April 28, 2014 11:36 AM

1 609 92A 0LG | (28.4.14) Bosch Power Tools
5|
GLM250 VF
Professional
1 608 M00 05B
9
2 607 001 391
10
2 609 160 194
11
OBJ_BUCH-2004-004.book Page 5 Monday, April 28, 2014 11:36 AM

English | 17
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
English
Safety Notes
All instructions must be read and observed in order to work safely
with the measuring tool. Never make warning signs on the measur-
ing tool unrecognisable. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE AND INCLUDE THEM WITH THE MEASURING TOOL
WHEN GIVING IT TO A THIRD PARTY.
Caution – The use of other operating or adjusting equipment or the applica-
tion of other processing methods than those mentioned here can lead to dan-
gerous radiation exposure.
Themeasuringtoolisprovidedwitha warning label(markedwithnumber
6 in
the representation of the measuring tool on the graphics page).
If the text of the warning label is not in your national language, stick the pro-
vided warning label in your national language over it before operating for the
first time.
Do not direct the laser beam at persons or animals and do not
stare into the direct or reflected laser beam yourself, not even
fromadistance.
You could blind somebody, cause accidents or dam-
age your eyes.
If laser radiation strikes your eye, you must deliberately close your eyes and
immediately turn your head away from the beam.
Do not use the laser viewing glasses as safety goggles. The laser viewing glass-
es are used for improved visualisation of the laser beam, but they do not protect
against laser radiation.
Do not use the laser viewing glasses as sun glasses or in traffic. The laser view-
ing glasses do not afford complete UV protection and reduce colour perception.
OBJ_BUCH-2004-004.book Page 17 Monday, April 28, 2014 11:36 AM

18 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
Have the measuring tool repaired only through qualified specialists using
original spare parts. This ensures that the safety of the measuring tool is main-
tained.
Do not allow children to use the laser measuring tool without supervision.
They could unintentionally blind other persons or themselves.
Do not operate the measuring tool in explosive environments, such as in the
presence of flammable liquids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
Do not make any modifications to the laser equipment.
Product Description and Specifications
Please unfold the fold-out page with the representation of the measuring tool and
leave it unfolded while reading the operating instructions.
Intended Use
The measuring tool is intended for measuring distances, lengths, heights, and clear-
ances. The measuring tool is suitable for measuring indoors.
Technical Data
Digital Laser Measure GLM 30
Article number 3 601 K72 5.. 3 601 K72 57.
Measuring range (typical) 0.15–30 m
A)
0.15–30 m
A)
Measuring range (typical under
unfavourable conditions) 20 m
B)
20 m
B)
Measuring accuracy (typical) ±2.0mm
A)
±2.0mm
A)
Measuring accuracy (typical under
unfavourable conditions) ±3.0mm
B)
±3.0mm
B)
Lowest indication unit 1mm 1mm
Operating temperature –10 °C...+45°C –10 °C...+45°C
Storage temperature –20 °C...+70 °C –20 °C...+70 °C
Relative air humidity, max. 90 % 90 %
Laser class 22
Laser type 635 nm, <1 mW 635 nm, <1 mW
OBJ_BUCH-2004-004.book Page 18 Monday, April 28, 2014 11:36 AM

English | 19
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
Laser beam diameter (at 25 °C)
approx.
–at10mdistance
–at30mdistance 9mm
C)
27 mm
C)
9mm
C)
27 mm
C)
Automatic switch-off after approx.
–Laser
–Measuringtool
(without measurement)
20 s
5min 20 s 5min
Weight according to
EPTA-Procedure 01/2003 0.1 kg 0.1 kg
Dimensions 105 x 41 x 24 mm 105 x 41 x 24 mm
Degree of protection IP 54 (dust and splash
proof)
D)
IP 54 (dust and splash
proof)
D)
Batteries
Rechargeable batteries 2 x 1.5 V LR03 (AAA)
2 x 1.2 V HR03 (AAA) 2 x 1.5 V LR03 (AAA) 2 x 1.2 V HR03 (AAA)
Individual measurement per
battery set 5000 5000
Setting the unit of measure –

Setting the sound  –
A) For measurementsfrom the rear measuring tool edge, weak backlighting and 25 °C operating tem-
perature are applicable for high reflectivity of the target (e.g. a white-painted wall). Inaddition, a devi-
ation influence of ± 0.05 mm/m must be taken into account.
B) For measurements from the rear measuring tool edge, strong backlighting and – 10 °C to +45 °C
operating temperature are applicable for low reflectivity of the target (e.g. a black box). In addition, a
deviation influence of ±0.15 mm/m must be taken into account.
C) At 25 °C operating temperature
D) except battery compartment
The measuring tool can be clearly identifiedwith the serial number
5 on the type plate.
Digital Laser Measure GLM 30
OBJ_BUCH-2004-004.book Page 19 Monday, April 28, 2014 11:36 AM

20 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
1 Display
2 Measuring button
3 Battery lid
4 Latch of battery lid
5 Serial number
6 Laser warning label
7 Reception lens
8 Laser beam outlet
9 Laser target plate*
10 Laser viewing glasses*
11 Protective pouch*
* The accessories illustrated or described are not included as standard delivery.
Display Elements
a
Auto-sum
b Previous measuring value
c Current measuring value
d Laser, switched on
e Length measurement
f Battery low indicator
g Temperature warning
h Error message “Error”
Assembly
Inserting/Replacing the Batteries
Using alkali-manganese or rechargeable batteries is recommended for operation of
the measuring tool.
With 1.2-V-rechargeable batteries fewer measurements could be possible than with
1.5-V-batteries.
Toopen the battery lid 3 ,press the latch 4 and remove the battery lid. Insert thebatteries/
rechargeable batteries. When inserting, pay attention to the correct polarity according
to the representation on the inside of the battery compartment.
OBJ_BUCH-2004-004.book Page 20 Monday, April 28, 2014 11:36 AM

English | 21
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
When the battery symbol appears for the first time on the display, at least 100
individual measurements are still possible.
When the battery symbol flashes, the batteries/rechargeable batteries must be
replaced. Measurements are no longer possible.
Always replace all batteries/rechargeable batteries at the same time. Do not use
different brands or types of batteries/rechargeable batteries together.
 Removethebatteries/rechargeable batteriesfromthemeasuringtoolwhennot
usingit for longerperiods.
When storing for longer periods, the batteries/recharge-
able batteries can corrode and self-discharge.
Operation
Initial Operation
 Do not leave the switched-on measuring tool unattended and switch the mea-
suring tool off after use.
Other persons could be blinded by the laser beam.
Protect the measuring tool against moisture and direct sun light.
 Donotsubjectthemeasuringtooltoextremetemperatures or variations intem-
perature.
As an example, do not leave it in vehicles for a long time. In case of large
variations in temperature, allow the measuring tool to adjust to the ambient temper-
ature before putting it into operation. In case of extreme temperatures or variations
in temperature, the accuracy of the measuring tool can be impaired.
Avoid heavy impact to or falling down of the measuring tool. After severe exte-
rior effects to the measuring tool, it is recommended to carry out an accuracy
check (see “
Accuracy Check of the Distance Measurement ”, page 24 ) each time be-
fore continuing to work.
Switching On and Off
Toswitchonthemeasuringtool,brieflypress the measuringbutton
2 .Measuringtool
and laser are switched on.
 Do not leave the switched-on measuring tool unattended and switch the mea-
suring tool off after use.
Other persons could be blinded by the laser beam.
To switch off the measuring tool, press the measuring button 2 and hold it down.
Measuring Procedure (see figure A)
Once switched on, the measuring tool is in the length measurement mode.
The rear edge of the measuring tool is always the reference level for the measurement.
Place the measuring tool against the desired starting point of the measurement (e.g.
a wall).
OBJ_BUCH-2004-004.book Page 21 Monday, April 28, 2014 11:36 AM

22 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
Briefly press the measuring button 2 to initiate the measurement. Then the laser beam
is switched off. To switch the laser beam on again, briefly press the measuring button
2 .
To initiate a further measurement, briefly press the measuring button
2 again.
Do not point the laser beam at persons or animals and do not look into the la-
ser beam yourself, not even from a large distance.
Note: The measured value typically appears within 0.5 seconds and no later than
4 seconds. The duration of the measurement depends on the distance, the lighting
conditions and the reflective properties of thetarget surface. Uponcompletion of the
measurement the laser beam is automatically switched off.
Auto-Sum (see figure B)
The auto-sum automatically shows the sum of all individual measurements (e.g. use-
ful for the material calculation).
Theauto-sum value iserasedas soon as the device is switched off or if it automatically
switches off when no button is pressed after 5 minutes.
The auto-sum is not saved. A subsequentcorrection of the auto-sum is not possible.
Aim the laser beam at the target surface.
Briefly press the measuring button 2 to initiate the measurement.
The current measured value
c appears in the bottom line of the dis-
play. The laser beam is switched off.
To switch on the laser beam, briefly press the measuring button
2 .
To switch on the laser beam, briefly press the measuring button
2
again. The current measured value
c is displayed in the bottom line.
Thepreviousmeasuredvalue
b is displayed in the middle line. In the
top line, the auto-sum
a (the sum of the current and previous meas-
ured value) is displayed.
Switching the Sound On and Off (3 601 K72 5..)
Switch the measuring tool off.
Pressandholdthemeasuringbutton 2 .When the cursor
is on the desired setting, release the measuring button
2 . After releasing, the measuring tool switches itself on
with the selected setting.
OBJ_BUCH-2004-004.book Page 22 Monday, April 28, 2014 11:36 AM

English | 23
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
Changing the Unit of Measure (3 601 K72 57.)
Switch the measuring tool off.
Pressandholdthemeasuringbutton 2 .When the cursor
is on the desired setting, release the measuring button
2 . After releasing, the measuring tool switches itself on
with the selected setting.
Display Illumination
The display illumination is continuously switched on. When no button is pressed, the
display illumination is dimmed after approx. 10 seconds to preserve the batteries/
rechargeable batteries. When no button is pressed for after approx. 30 seconds, the
display illumination goes out.
Working Advice
General Information
The reception lens 7 and the laser beam outlet 8 must not be covered when taking a
measurement.
The measuring tool must not be moved while taking a measurement. Therefore, place
the measuring tool, as far as this is possible, against or on a firm stop or supporting
surface.
Influence Effects on the Measuring Range
The measuring rangedepends on the lighting conditions and the reflective properties of
the targetsurface.For better visibility ofthe laserbeam in extraneous light, use thelaser
viewing glasses
10 (accessories) and the laser target plate 9 (accessories) or shade the
target area.
Influence Effects on the Measuring Result
Dueto physical effects, faultymeasurements cannotbe excludedwhen measuringon
different surfaces. Included here are:
– transparent surfaces (e.g., glass, water),
– reflecting surfaces (e.g., polished metal, glass),
– porous surfaces (e.g. insulation materials),
– structured surfaces (e.g., roughcast, natural stone).
If required, use the laser target plate 9 (accessory) on these surfaces.
Furthermore, faulty measurements are also possible when sighting inclined target
surfaces.
OBJ_BUCH-2004-004.book Page 23 Monday, April 28, 2014 11:36 AM

24 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
Also, air layers with varying temperatures or indirectly received reflections can affect
the measured value.
Accuracy Check of the Distance Measurement
The accuracy of the measuring tool can be checked as follows:
– Select a permanently unchangeable measuring section with a length of approx. 3
to10metres;itslengthmustbepreciselyknown (e.g.thewidthofaroomoradoor
opening). The measurement should be carried out under favourable conditions,
meaning, the measuring distance must be indoors and the target surface for the
measurement must be smooth and reflect well.
–Measurethedistance10 times after another.
The deviation of the individual measurements from the average value must not exceed
±4 mm over theentire measuring section in favourable conditions. Record themeasure-
ments in order tobe able to compare the accuracy at a later date.
Troubleshooting – Causes and Corrective Measures
Cause Corrective Measure
Temperature warning indicator (g)flashing; measurement not possible
The measuring tool is outside the operat-
ing temperature range of –10 °C to
+45 °C.
Wait until the measuring tool has reached
the operating temperature
“Error” indication in the display
The target surface reflects too intensely
(e.g. a mirror) or insufficiently (e.g. black
fabric), orthe ambient light is too bright.
Work with the laser target plate 9
(accessory)
The laser beam outlet
8 or the reception
lens
7 are misted up (e.g. due to a rapid
temperature change).
Wipe the laser beam outlet
8 and/or the
reception lens
7 dry using a soft cloth
The calculated auto-sum is greater than
99999 m. Divide calculation into intermediate steps
Measuring result not plausible
The target surface does not reflect
correctly (e.g. water, glass). Cover off the target surface
The laser beam outlet
8 or the reception
lens
7 are covered. Make sure that the laser beam outlet
8 or
the reception lens
7 are unobstructed
Obstruction in path of laser beam Laser point must be completely on target
surface.
OBJ_BUCH-2004-004.book Page 24 Monday, April 28, 2014 11:36 AM

English | 25
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
The measuring tool monitors the proper function for each measurement. When a de-
fectisdetected, all indicators on the display flash.Inthis case,or whenthecorrective
measures listed above cannot correct the error, have your dealer forward the meas-
uring tool to an authorised Bosch after-sales service.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or solvents.
Maintainthereceptionlens
7 inparticular,withthesamecareasrequiredforeyeglasses
or the lens of a camera.
If the measuring tool should fail despite the care taken in manufacturing and testing
procedures, repair should be carried out by an authorised after-sales service centre
for Bosch power tools. Do not open the measuring tool yourself.
After-sales Service and Application Service
Our after-sales service responds to your questions concerning maintenance and repair
of your product as well as spare parts. Exploded views and information on spare parts
can also be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions concerning our products
and their accessories.
In all correspondence and spare parts orders, please always include the 10-digit article
number given on the type plate of the measuring tool.
The indication remains unchanged or the measuring tool reacts unexpectedly
after pressing a button
Software error Remove the batteries and start themeas-
uring tool againafter reinserting them.
Cause Corrective Measure
OBJ_BUCH-2004-004.book Page 25 Monday, April 28, 2014 11:36 AM

26 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product
in need of servicing or repair.
Tel. Service: [phone]
E-Mail: boschservicecent[email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: [phone]
Fax: [phone]
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: [phone]
Fax: [phone]
Inside New Zealand:
Phone: [phone]
Fax: [phone]
Outside AU and NZ:
Phone: [phone]
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: [phone]
OBJ_BUCH-2004-004.book Page 26 Monday, April 28, 2014 11:36 AM

English | 27
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: [phone]
Fax: [phone]
E-Mail: [e-mail]
Bosch Headquarters
Midrand, Gauteng
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected]ch.com
People’s Republic of China
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: [phone]
Fax: [phone]
E-Mail: contact.pt[email protected].com
www.bosch-pt.com.cn
OBJ_BUCH-2004-004.book Page 27 Monday, April 28, 2014 11:36 AM

28 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: [phone]
Fax: [phone]
E-Mail: [e-mail]
www.bosch-pt.com.hk
Indonesia
PT Robert Bosch
Palma Tower 9
th
& 10
th
Floor
Jl. Let. Jend. TB Simatupang II S/06
Jakarta Selatan 12960
Indonesia
Tel.: [phone]
Fax: [phone]
E-Mail: [email protected].com
www.bosch-pt.co.id
Philippines
Robert Bosch, Inc.
28th Floor Fort Legend Towers,
3rd Avenue corner 31st Street,
Fort Bonifacio Global City,
1634 Taguig City, Philippines
Tel.: [phone]
Fax: [phone]
[e-mail]
www.bosch-pt.com.ph
Bosch Service Center:
9725-27 Kamagong Street
San Antonio Village
Makati City, Philippines
Tel.: [phone]
Fax: [phone]
[email protected]
OBJ_BUCH-2004-004.book Page 28 Monday, April 28, 2014 11:36 AM

English | 29
Bosch Power Tools 1 609 92A 0LG | (28.4.14)
Malaysia
Robert Bosch (S.E.A.) Sdn. Bhd.
No. 8A, Jalan 13/6
G.P.O. Box 10818
46200 Petaling Jaya
Selangor, Malaysia
Tel.: [phone]
Fax: [phone]
[e-mail]
Toll-Free: 1800 880188
www.bosch-pt.com.my
Thailand
Robert Bosch Ltd.
Liberty Square Building
No. 287, 11 Floor
Silom Road, Bangrak
Bangkok 10500
Tel.: [phone]
Fax: [phone]
Robert Bosch Ltd., P. O. Box 2054
Bangkok 10501, Thailand
www.bosch.co.th
Bosch Service – Training Centre
La Salle Tower Ground Floor Unit No.2
10/11 La Salle Moo 16
Srinakharin Road
Bangkaew, Bang Plee
Samutprakarn 10540
Thailand
Tel.: [phone]
Fax: [phone]
OBJ_BUCH-2004-004.book Page 29 Monday, April 28, 2014 11:36 AM

30 | English
1 609 92A 0LG | (28.4.14) Bosch Power Tools
Singapore
Robert Bosch (SEA) Pte. Ltd.
11 Bishan Street 21
Singapore 573943
Tel.: [phone]
Fax: [phone]
[email protected].com
Toll-Free: 1800 3338333
www.bosch-pt.com.sg
Vietnam
Robert Bosch Vietnam Co. Ltd
10/F, 194 Golden Building
473 Dien Bien Phu Street
Ward 25, Binh Thanh District
84 Ho Chi Minh City
Vietnam
Tel.: [phone] ext. 413
Fax: [phone]
[email protected]h.com
www.bosch-pt.com
Disposal
Measuring tools, accessories and packaging should be sorted for environmental-
friendly recycling.
Do not dispose of measuring tools and batteries/rechargeable batteries into
household waste!
Only for EC countries:
According to the European Guideline 2012/19/EU, measuring tools
that are no longer usable, and according to the European Guideline
2006/66/EC, defective or used battery packs/batteries, must be
collected separately and disposed of in an environmentally correct
manner.
OBJ_BUCH-2004-004.book Page 30 Monday, April 28, 2014 11:36 AM

McGrp.Ru
Сайт техники и электроники
Наш сайт McGrp.Ru при этом не является просто хранилищем
инструк ий по эксплуата ии, это живое сообщество людей. Они общаются
на форуме, задают вопросы о способах и особенностях использования техники.
На все вопросы очень быстро находятся ответы от таких же посетителей сайта,
экспертов или администраторов. Вопрос можно задать как на форуме, так и
в спе иальной форме на страни е, где описывается интересующая вас техника.