Bosch FMR-1000-RA User manual

Fire Alarm Systems | FMR‑1000‑RA Remote Annunciator
The FMR‑1000‑RA Remote Annunciator is a four‑conductor
LCD annunciator without system control capability. It
shows the equivalent LEDs and LCD display. It includes a
piezo sounder, navigation buttons, and acknowledge key.
The navigation functions and the acknowledge key are
accessible without restriction.
The Remote Annunciator features tabs with different
language versions for LED and key text. The housing
includes a built-in level and allows for surface and
semi‑flush mounting.
Functions
Display
The Remote Annunciator uses an 80‑character (4 lines X
20 characters) wide viewing-angle LCD display. The display
includes a long‑life LED backlight. The backlight is
controlled by the panel, or locally turned on upon any key
press and turned off after a 30 sec timeout without key
press. Even when AC power is lost, the LED backlight is still
turned on if a user is operating the keypad.
System Normal: When no alarms or troubles exist in the
system, the Power LED lights steadily, and no other LEDs
are lit. The LCD display shows two banner lines, the system
status line, and the date and time.
System Off‑normal: If any off‑normal condition exists, the
panel displays the number of off‑normal conditions
classified in groups. Groups include fire alarm, gas alarm,
supervisory, and trouble. The panel holds up to 255 events
for each group at a time. Any restored event is deleted from
the list.
Piezo Sounder
The Remote Annunciator has a piezo sounder that provides
audible indication of the system status. In case of multiple
activation, the system status with highest priority is
indicated.
Certifications and Approvals
Region Certification
USA UL FSYE: Emergency Alarm System
Accessories (ANSI/UL 2017), UOXX:
Control Unit Accessories, System (ANSI/
UL 864, 9th edition)
CSFM 7165-1615:229 Fire Alarm Control Unit
(Commercial)
FDNY-
CoA
6034
FMR‑1000‑RA Remote Annunciator
▶LED status indicators
▶80‑character LCD display
▶Piezo sounder
▶Navigation buttons
▶Acknowledge key
www.boschsecurity.com

2 | FMR‑1000‑RA Remote Annunciator
Installation/Configuration Notes
Mounting Considerations
The Remote Annunciator can be surface mounted in the
supplied back box or flush mounted using a 3‑gang
electrical box.
Note The annunciator should be mounted no higher
than shoulder height of the shortest person
operating the system.
Wiring Considerations
Use four conductor, 18 AWG (0.8 mm2) or larger wire to
connect the Remote Annunciator to the Option Bus of the
FACP. The total length of wire connected to the Option Bus
terminals must not exceed 4000 ft (1219 m), regardless of
the wire gauge used. Refer to FPA‑1000‑UL Installation and
Operation Guide (F01U075420) for detailed wire length
calculations.
Parts Included
Quant. Component
1 Remote annunciator in back box with cover frame
Tabs with different language versions for LED and key text
1 Hardware pack
1 Literature – Installation and Operation Guide
Technical Specifications
Electrical
Voltage (operating): 12 VDC or 24 VDC nominal
Current consumption at 12 VDC
Alarm: 150 mA maximum (with annunciator lighted and
piezo sounder on)
Stand-by: 25 mA maximum (only Power LED on)
Current consumption at 24 VDC
Alarm: 120 mA maximum (with annunciator lighted and
piezo sounder on)
Stand-by: 30 mA maximum (only Power LED on)
Environmental
Environment: Indoor, dry
Environment Friendly: RoHS compliant
Protection Class: IP 30 (per IEC 605029)
Relative Humidity: Up to 95%, non‑condensing
Temperature (operating): +32°F to +120°F (0°C to +49°C)
Temperature (storage): -4°F to +140°F (-20°C to +60°C)
Mechanical
Operating and Display Elements
LCD: 4‑line x 20‑character display, backlit
LEDs: Six: Fire Alarm (red); Gas Alarm (blue); Power
(green); Supervisory, Silenced, and Trouble
(3 x yellow)
Keys: Acknowledge key, 4 navigation keys
Sounder: Built-in piezo sounder
Housing
Material: ABS-FR
Color: Red
Dimensions (W x H x D)
•Back box:
•Cover frame:
7.40 in x 4.41 in x 1.89 in.
(188 mm x 112 mm x 48 mm)
7.40 in x 4.41 in x 2.40 in.
(188 mm x 112 mm x 61 mm)
Weight: 15.2 oz (430 g)
Wiring
Cable Entries: 3 knockouts for ½ in. diameter conduit con-
nectors on back, bottom and top side
Connections: 4 terminals
Wre Gauge: 12 AWG to 18 AWG
(0.75 mm2 to 3.25 mm2)
Wire Type: Non-shielded, four conductor wire
Ordering Information
FMR‑1000‑RA Remote Annunciator
LCD annunciator without system control capa-
bility for use with the FPA‑1000‑UL Compact
Fire Panel
FMR-1000-RA
Americas:
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, New York, 14450, USA
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.us
Europe, Middle East, Africa:
Bosch Security Systems B.V.
P.O. Box 80002
5600 JB Eindhoven, The Netherlands
Phone: + 31 40 2577 284
Fax: [phone]
[email protected]
www.boschsecurity.com
Asia-Pacific:
Robert Bosch (SEA) Pte Ltd, Security Systems
11 Bishan Street 21
Singapore 573943
Phone: [phone]
Fax: [phone]
[email protected]
www.boschsecurity.com
Represented by
© Bosch Security Systems Inc. 2009 | Data subject to change without notice
T5691240971 | Cur: en-US, V3, 27 Oct 2009