Bose Soundbar 500 User manual

SURROUND SPEAKERS

Please read and keep all safety, security, and use instructions.
Choose your setup method
Your setup method depends on which soundbar you have.
Bose Soundbar 500 and Bose Soundbar 700: See method 1.
SoundTouch 300 soundbar: See method 2.
START HERE
ENGLISH

METHOD 1
BOSE SOUNDBAR 500 OR BOSE SOUNDBAR 700
Set up using the Bose Music app
a. In the Bose Music app, from the My Bose screen, tap your soundbar.
b. Tap the soundbar image in the bottom-right corner of the screen.
c. Tap Settings >Accessory Speakers >Add Bose Accessory Speakers.
New to Bose Music app?
Download the app and follow the app instructions to
set up your soundbar and surround speakers.
ENGLISH

METHOD 2
SOUNDTOUCH 300 SOUNDBAR
ab
Connect your adapters
a. Insert the color-coded speaker cable wires into their
corresponding terminals.
b. Turn the screws to the right (clockwise) to secure the wires into
the terminals.
c. Repeat steps a and b to connect your other adapter.
Identify switch settings on wireless receivers
a. Confirm that the switch on one wireless receiver is set to R(right).
b. Confirm that the switch on the other wireless receiver is set to L(left).
ENGLISH

METHOD 2
(CONTINUED)
c d
Connect your rear speakers
a. Insert the adapter into the back of the speaker.
b. Insert the two-pin connector into the wireless receiver.
c. Repeat steps 1 and 2 to set up your other speaker.
Place your rear speakers and wireless receivers
a. Facing your TV, place the speaker and Rwireless receiver on the right
side of your room.
b. Facing your TV, place the speaker and Lwireless receiver on the left side
of the room.
c. Connect to power.
ENGLISH

Connect the surround speakers to the soundbar
a. On your SoundTouch 300 remote control, press e.
b. Press and hold Guntil lon the soundbar blinks white.
Once the surround speaker connects, you hear a tone and l
glows white.
NOTE: Connecting may take several minutes.
Set up ADAPTiQ audio calibration
a. Connect the ADAPTiQ headset (included with the soundbar) to the
soundbar’s aconnector.
b. Put the headset on your head.
ADAPTiQ
METHOD 2
(CONTINUED)
ef
ENGLISH

Run ADAPTiQ audio calibration
a. On your SoundTouch 300 remote control, press e.
b. Press and hold Huntil gand lon the soundbar glow green.
NOTE: To cycle through languages, press dand con the
navigation pad.
METHOD 2
(CONTINUED)
g
worldwide.Bose.com/Support/WSS
m X o s W
w
ENGLISH

Læs og opbevar alle sikkerheds- og brugsinstruktioner.
Vælg opsætningsmetode
Opsætningsmetoden afhænger af, hvilken soundbar du har.
Bose Soundbar 500 og Bose Soundbar 700: Se metode 1.
SoundTouch 300 soundbar: Se metode 2.
START HER
DANSK

METODE 1
BOSE SOUNDBAR 500 ELLER BOSE SOUNDBAR 700
Opsætning ved hjælp af Bose Music-appen
a. I Bose Music-appen skal du trykke på din soundbar på skærmbilledet My Bose.
b. Tryk på soundbarbilledet i nederste højre hjørne af skærmbilledet.
c. Tryk på Settings >Accessory Speakers >Add Bose Accessory Speakers.
Er det første gang du bruger Bose Music-appen?
Download appen før, og følg instruktionerne i appen for at
konfigurere din soundbar og dine surroundhøjttalere.
DANSK

METODE 2
SOUNDTOUCH 300 SOUNDBAR
ab
Tilslut dine adaptere
a. Sæt det farvekodede højttalerkabel i deres tilhørende terminaler.
b. Drej skruerne til højre (med uret) for at fastgøre ledningerne i
terminalerne.
c. Gentag trin a og b for at tilslutte den anden adapter.
Identificer omskifterindstillinger på trådløse modtagere
a. Bekræft, at kontakten til den anden trådløse modtager er indstillet til
R(højre).
b. Bekræft, at kontakten til en trådløs modtager er indstillet til L(venstre).
DANSK