Boss Audio Systems BV12.1MCH User manual

USER'S MANUAL
BV12.1MCH
12.1" (307mm) WIDESCREEN
FLIP-DOWN TFT MONITOR
INCWDING 'TW081RS OF DUAL OtANNEL HEADPHONES
2J(i)fal~~
BO~S
AUDIO SYSTEMS

Caution ----------------------------------------------------· 2
Product Controls and Functions ---- ------ -- -- ---- -- ------ 4
-Unit-------------------------------------------------------- 5
-Remote Control Diagram ---------------- -- ------ -- -- -- ------ 6
TFT Menu Setup --- --- ---------------- ---- -- -- ----- -------- 7
1. Picture Display Setup ------- - -------------- - ------------ - ---· 7
2. Aud lo ----------------------------------------------------- 7
3. 0$0 --- --- ------------------------------------------------ 7
4. System setting ----- - ---- --------------------- --- ----- ------ 7
Setup Menu - --------------- - ------ - -- - -- --- -- - -- ---- --- --· 8
1. System Setup ---- --------------- ----- --------- --------- ---- 8
2. Language Setup -------------------- -------- --------- ----- -· 9
3. Video Setup --- ------ ------------- - ----- - ----------------- - -·1O
ConnectionDiagram - -- - ------ -- -- - -- - -- - -- ---------- -- --- · 11
Installation ------------------------------------------------ 12
Interchangeable Housing Change Diagram- --- - ----- -------· 13
Troubleshooting -- -- - -- - -- --- -- - -- - -- ---- -- - -- ------- -- - -- -- 14
Specifications----------------------------------------------· 15

Caution
Please read andobserve all warnings and instructions in thisowner'smanual
and those marked on the unit. Retain thisbooklet for future reference.
Thereare
two kinds of caution symbolsasfollows:
WARNING
Thissymbol is intended to alert the user on the presence of
dangerous voltage within the product's enclosure that may cause
electric shock to you.
CAUTION
Theexclamation pointwithin an equilateral triangleis intended
to
di re ct attention to the presence of importantoperating and
maintenance (servicing) instructions in
the literature
accompanying theproduct.
& WARNING
Hazard! do not operate this
unit unless vehicle is parked
in safe and legal area.
Do not try and service these
products yourself. Seek only
a qualified service center or
factory sevi ca center.
Be careful notto drop or
apply pressure to the front
panel of your video monitor.
If the screen cracks due to
misuse, your warranty will
be void!
Do not mount the product where
it will obstruct the deployment of
the airbag or in an area where it
would affect the vehicular control.
Also be careful to avoid mounting
the product where it can become
hazardous during sudden stops or
in the event of an accident.
Do no place any liquids neartha
monitor.
If any liquid is spilled on the
unit, pull overtotha side
of the road,
tum the ignition completely
off and
dry the product with a towel. Do not operate the
equipmentagain until all liquids have either
evaporated
or you have the unitinspected bya
qualified technician atyourlocal authorized dealer.
Be careful notto overload your ~
cigarette lighter plug by adding -
more than one device at a time.
Use only a damp cloth to clean
the screen and use only purified
water on the cloth , wring out alI
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will dol
2

I
Quality installations are best
performed byqualified and
certified installers.
Don't touch the unit if there is
lightning asthis maycause an
electricshock to you.
&cAUTION
Do not coverthe heater ducts or
vents asthis maycause a fire
or
electric shock
!G!r Check Point
Caution
Watching the monitor foran
extended period of lime
without the engine running
may deplete
the vehicle•s
battery, to the point where
the engine can no
longer be started.
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle .It
is not suitable for operation
under other conditions or
voltages.
Do not bring magnetic items such
as creditcards and other cards with
magnetic shipsnearthe monitor as
this maycausedamage tothe
un it
and/ormagnetic
Item
1.The operating temperature of this productis limted to -10°c-+ 60"c.
Yourvehicle can reach temperatures up to 80°c in the summertime.
2.From time to time when yourvehicle is extremely hot or cold you must allow
time for yourairconditioner or heater to cool or heatthe vehicle and for
operating temperatures to return to normal operating ranges. Yourmonitorwill
return to its normal functions when theseoperating temperature are achieved.
3.Youroptimum picture quality is achieved when you aredirectlyin front
of the
monitor(+/-30degrees).
4.Do notopen covers and repair
yourself. Referservicing toqualified personnel.
5.DVD Players use an invisiblelaser beam which can cause hazardous radiation
exposure. Be sure to operate the unitcorrectlyas instructed.
6. Do not tum ignition off while adiscis playing. It can cause damage to the
DVD Player.
3

Product Controls and Functions
___ LAMP __ _
Wireless Infrared (IR) Transmitter.
IRaudio signals are transmitted wirelessly to
optional IR headphones
4
Remote Control Eye.
This allowstransmitting of the
remote
control's IR signals for
controlling allfunctions of your
monitor.

REMARKS :
Following functions work when Jong pressing 1-2 seconds.
"
OPEN " " II> " " • " "~ "• • •
*Caution
Do not bring magnetic items such
as creditcards
or othercards with
magneticstrips nearthe monitor
as this
may cause damage to the
unit and/or magnetic item.
5

Remote Control Diagram
~~~~~~~~~~~-
Mode
Down
----
DVD Menu
NumericButton
6
DiscfSD/USB
Setup
Play/pause
Right
Stop
Enter
Zoom
--- DispReturn
Program
SubtiUe

~~~~~~~~~~~~~~~
TPT M•nu Setup
1, PICT\IREDlllPLAY SEJUP
Pt c t. •
• A • '
0- U • t •
., ,.,t -• ..
... .,. .. .
..
--· •
C:.ler , _
.... .
- ... ,... .... .... .
.. It
Cut1•wMM ................ nl
IMrpn- •• I ~111nta
... ,.
• a • '
...
"
"'
-••
...
... .. 1
· ~ --
IR: Du•I channele(Aor B) mn be ulec:tad
orturnedotr
FM:Fraquen cl H re.11111: 87. 7-107. llMHz
3, 08D 4. SYSTUIBETllNG
T
lale : Ser.Id~ 18:9 Ind 4:3
I .. :Auto turn off I m1t HWng from t0
to 120 min utu

o SETUPKEY
Plwl 111• SET\JP bu .lllln ID enter tile SET\JP MENUa 1'-1 INllow .
lrlllde fie DVD SET UP MENU, three categorlM SYSTEM , LANGUAGE,
VICEO , could be choaen.
Ueere ~" .c!J ulll or c:hGOee dlfferentopt~ Inc;luded In the DVD dltc that 11 playing.
A
1V llYll1EM 8.
POWER RESUME
C. TV TYP E D. PASSYiORD { OOOD)
E. RA T ING
F. DE F AU LT
8

2. l..AllGUAGE IET\IP
A. 090 U\HQUAOE
C. 8UB1DLE LANG
B. AUDIO LANO
D.MENU LANG

SETUP MENU
S. Vl>EO SETUP
A. BRIGtmlE88
B.CONTRAST
0. MTIJRATION
E.BHARPNESS
10

Connection Diagram
GIU) CBLACD ---~
ACC (lBD)
..aim
n+CBLUI!)
TR- LAD
B+ LI.OJ)
0
F.I! An t enna (BuCI)
*How to connect the DOORTRIGGER wire
1. Connect yellowpositive (+) wire
AUD101 R IN(RED)
AUDIO1 L IN(llllm)
VIDE01 IN(TllW)r)
AUDIO
ROLIT(RED)
AUDIO L OUT(llHITE)
VIDEOOUT{Yl!LLOI)
0
0
2. Check your vechicle' s door triggeris positive "+" or negative "-"
3. Connect unit one correcttriggerwire (positive "+" or negative "-" )
with vechicle' s door triggerin accordance
11

I nstallatlon
1. 0pen the box and check the contents .
r oc:::::::::::>
= =
..
~
~ ~
0
~ 0
"' =
' 0 = 0 =·
Mounting Plate UNIT
'f 'f
'f 'f
SCREWB
2. Align mounting plate with installation position and secure plate with screws
/ ~
u '
@= = =@
~
~
~
0
~ 0
® = = = ®
' 0 0
Use the correct screws that matchesthe car.
3.Tighten
the unit with the supplied SCREW B.
i,
J.
12

Interchangeable Housing Change Diagram
Assembling the shroud
Begining by hooking the area and press the shroud over the pod. The shroud will snap in
place. lighting the shroud by screws supplied.Removing shroud
Release screws and take out the shroud as diagram
Removing Screen back From The Housing
working on a softsurface to avoid damaging the plastic.
Insertthe supplied pry tool between the Housing Screen back,
then press the prytool to releasethe Screen back.
Assembling the screen back
Begin by hooking the area and press the Shroud/Screenbackoverthe pod.
The Shroud/Screen backwill snap in place.
Swivel cover moving/assembling
Use supplied small tool to insert the hook hole, and get the cover off.
Pressing the swviel cover over the swivel, the cover will snap in place
13
SNAP JOINT

Troubleshooting
~~~~~~~~~~~~~~~~~~~~~~~----'
Symptom
Items to check
Actions to be Taken
ButlDn does not Md Is the powerturned on? Check the car battery capacity
No sound lathe audo cable sat to raceive the Selectthe correct Inputmodefortheau<ioreceiver.
DVDsignal output?
la the audiocable connected
sea.irety?
la the monitorconnected with
the audio tumed
on ?
Is the digital audio output set
In the correct poslUon?
Remote control does Isthe remote controlfacing
not work property. the remote eeneor?
la the dlalance IDo far?
la lheAI any oblltade in the FT9ddle?
la the batteryexhausllld?
14
Connecttheaudiocableintothejacks aacUA1ly.
Tum on the monitorconnected to the audio cable
does not wortc property
Setthe DigitalAudio Output to thecorrect position,
and then tum on the DVD playerbypressing the
POWER button.
Pointtheremotecontrol to the n1mote seruior of the
product.
Use the remote control within 5m
Remove the obstacle.
Replacewith new batteries
Check antenna connection.

Specifications
~ Check point
When adisc is brought from a cold environment to a hot one ,there may be condensation
on the face
of the disc orpick up lens. This can affect the operation of the unit.
1.Remove the disc from the DVD player.
2.Tum on the power and leave it on for an hour to vaporize the condensation.
3.You can operate the DVD player without any problems.
f
Screen Size 12.1 "TFT LCD Panel
Power DC12V
Consumption
20W
Screen Format 16:9
Resolution
1280(H)x800(V)xRGB
Color System
NTSC/PAL .Auto Selection
AN Input 2EA
A/VOutput 1EA
HD InputResolutlon UNDER 1080P
HD Input Rafresh Frequency
50HZ/60HZ
Dimension
366.5(W)X300(D)X63.5(H)mm/14.4(W)X11.8(D)X2.5{H)800
15