Boss Audio Systems BV2600U User manual

2
Compatible with PAL DVD (Video
CD) and NTSC DVD (Video CD)
This player can play discs recorded in
either PAL or NTSC format.
• A single LSI chip now integrates all
major DVD playback circuit functions
including MPEG2 decoder, video D/A
converter, and audio decoders.
• L/R stereo analog audio outputs for
connection to existing head unit aux
inputs. Video output is composite
video.
• Supplied remote handles
multi-function software (multi-language
audio-track/subtitle, multi-angle, multi-
story, etc.), plus all basic functions.
USE THIS PRODUCT SAFELY
Use the Proper Power Supply
This product is designed to operate with
a 12 volt DC, negative ground battery
system.
Protect the Disc Mechanism
Avoid inserting any foreign objects into
the disc driver of this player. Failure to
observe this may cause malfunction due
to the precise mechanism of this unit.
Use Authorized Service Centres
Do not attempt to disassemble or adjust
this precision product. Please refer to
the Service Centre list included with this
product for service assistance.
FEATURES

3
CONTENTS
Safety Information......................................................................................................4
Disc Notes...................................................................................................................5
The Player ...................................................................................................................6
Remote Control ..........................................................................................................8
Location and Function of Keys...............................................................................8
Preparing the Remote Control..............................................................................10
General Operation ....................................................................................................11
Turn the unit On/Off ..............................................................................................11
Basic Play .............................................................................................................11
DVD Video Menu Play...........................................................................................11
Mode Selection.....................................................................................................11
Menu function.......................................................................................................11
Advanced Operation ................................................................................................12
Repeat Play/Paragraph Repeat Play ....................................................................12
PBC Menu Playback of VCD/SVCD .....................................................................12
On-screen Display Function .................................................................................12
Goto Function.......................................................................................................13
Zoom Function .....................................................................................................13
Special Function for DVD .....................................................................................13
Special Function for VCD and CD ........................................................................14
Data Disc Play Operation .....................................................................................14
Memory card Operation........................................................................................15
USB Play Operation..............................................................................................15
Setup..........................................................................................................................16
System Setup .......................................................................................................16
Language Setup ...................................................................................................16
Audio Setup ..........................................................................................................16
Trouble Shooting ......................................................................................................17
Specifications ...........................................................................................................18

4
CAUTION:
MOBILE DVD PLAYER IS A CLASS I
LASER PRODUCT. HOWEVER THIS
MOBILE DVD PLAYER USES A
VISIBLE/INVISIBLE LASER BEAM
WHICH COULD CAUSE HAZARDOUS
RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE THE MOBILE
DVD PLAYER CORRECTLY AS
INSTRUCTED.
USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND - DO NOT
REPAIR YOURSELF. REFER SERVICING
TO QUALIFIED PERSONNEL.
WARNING:
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR
MOISTURE.
• TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, AND ANNOYING
INTERFERENCE, USE ONLY THE
RECOMMENDED ACCESSORIES.
• THIS DEVICE IS INTENDED FOR
CONTINUOUS OPERATION.
This product incorporates copyright
protection technology that is protected
by method claims of certain U.S. patents
and other intellectual property rights
owned by Macrovision Corporation and
other rights owners. Use of this
copyright protection technology must be
authorized by Macrovision Corporation,
and is intended for home and other
limited viewing uses only unless
otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
SAFETY INFORMATION
Region Management Information
Region Management Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region
Management Information that is recorded
on a DVD disc. If the Region number
described on the DVD disc does not
correspond to the Region number of this
Mobile DVD Player, this Mobile DVD
Player cannot play this disc.

DISC NOTES
5
Disc formats supported by this player
DVD
12 cm disc
Video CD
12 cm disc
CD
12 cm disc
MP3
12 cm disc
MPEG4
12 cm disc
Handling and Cleaning
• Dirt, dust, scratches and warping disc
will cause misoperation.
• Do not place stickers or make
scratches on discs.
• Do not warp discs.
• A disc should always be kept in its
case when not in use to prevent from
damage.
• Do not place discs in the following
places:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Disc Cleaning
Use a dry soft cloth to wipe the surface.
If the disc is quite dirty, use a soft cloth
slightly moistured with isopropyl (rubbing)
alcohol. Never use solvents such as
benzine, thinner or conventional record
cleaners as they may mar the surface of
the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it
unusable) depending on your handle it
and conditions in the usage environment.
Note these scratches are not an
indication of any problem with the player.
Preparing New Discs with Rough
Spots
A new disc may have rough edges on its
inside and outside edges. If a disc with
rough edges is used, the proper setting
will not be performed and the player will
not play the disc. Therefore, remove the
rough edges in advance by using a ball
point pen or pencil as shown on the right.
To remove the rough edges, press the
side of the pen or pencil against the
inside and outside edges of the disc.
Rough spots
on inside edge
Ball point pen
or pencil
Rough spots on
outside edge
Label side up
Do not touch
the underside
of the disc
Do not bend
Wipe the disc from center
toward the outside edge

6
THE PLAYER
FRONT VIEW
1. (POWER)
2. (Eject Button)
3. Reset Button
4. Disc Slot
5. /(PLAY/PAUSE)
6. (Stop)
7. PREVIOUS ( )
8. NEXT ( )
9. USB Port & MEMORY Card interface
28 365719 4

7
THE PLAYER
10. DC 12V INPUT Socket
11. DC 12V OUTPUT Socket
12. REMOTE Socket
13. AUDIO OUTPUT L/R
14. VIDEO OUTPUT
BACK VIEW
1110 12 13 14

8
Location and Function of Keys
REMOTE CONTROL
4
24
25
22
23
21
20
19
15
14
1
2
3
6
5
8
7
10
13
12
9
11
17
16
18

9
REMOTE CONTROL
1. PBC In VCD mode, press PBC button to change the PBC on or off.
2. POWER Press to turn the unit ON or OFF.
3. Press it for the frist time to pre-stop playback, press it again to
stop playback.
4. GOTO Press to select the bookmark that you set.
5. AUDIO On multi-audio soundtrack disc, press to change the AUDIO
soundtrack.
For VCD/CD press to change the sond mode.
6. SUB-T Changing of the SUBTITLE language on multi-subtitle language
DVD disc.
7. REPEAT Switch the Repeat mode of discs.
8. A-B A-B repeat allows a passage to be repeated continuously.
9.
/ Press to skip to the next track and press to skip back one
track.
10. ZOOM Allows the picture to be increased in size.
11. / Press to search forward rapidly & to search reverse rapidly.
12. 0-9 Numeric buttons
13. PROG Allows the track played in the order you programmed.
14. 10+ Digital selecting button, cooperatively used with numeric buttons.
15. MENU Display the adjustment items, such as Bright, Contrast, Color,
Tint, and Screen.
16. / , / In some menus, / , / buttons served as cursor buttons to
select item left/right, ahead/back.
17. ENTER Confirm the Track/Chapter selected with the numeric buttons or
selected with the cursor buttons on TV screen.
18. SETUP In DVD mode, press to display the SETUP menu.
19. ANGLE Changing of the view angle on multi-angle DVD disc.
20. VOL+/- Press VOL+/- to increase / decrease the volume level.
21. TITLE/PBC In DVD mode, press TITLE button to display the TITLE menu
stored in DVD disc.
22. Press it to mute the sound, press it again will resume the sound.
23. Press to play the disc, press it again to pause playback.
24. EJECT Press it to eject the disc from the disc slot.
25. DISP Display statistical disc information during playback.

10
Preparing the Remote Control
Inserting the Battery
1. Open the battery compartment cover.
2. Insert the new battery. Make sure
that the positive and negative
terminals of the battery are oriented
as indicated.
3. Close the cover.
• Battery: a button cell lithium battery
(CR2025 3V)
Using the Remote Control
Face the remote control towards left side
of the front panel.
Operation angle: About 30 degree in
each the direction of the left front panel.
REMOTE CONTROL