Bowflex BDS-220 User manual

BDS-220
Assembly Instructions
(Rev A)

BDS-220
1
# Assembly Components Qty.
1" 7"
6"
5"
4"3"
2"
Button Head Allen Screw Lock NutFlat Washer
Tools Required
7/32" Allen Wrench
9/16" Socket
9/16" Wrench or Adjustable Wrench
1
2
3
4
5
6
7
8
9
1
1
1
4
8
4
2
2
4
Leg
Base
Dumbbell Platform
3/8" Button Head Allen Screw 2 3/4"L
3/8" Flat Washer
3/8" Lock Nut
Hold Down Strap - Male
Hold Down Strap - Female
Wheel
2
1
9
3
7
8
4
5
5
6
4
5
5
6

Slide the Leg (1) through the Base (2) as shown.
Attach the Leg (1) to the Base (2) using the hardware
shown.
Tighten all hardware.
Attach each wheel (9) to the Base. Wheels can be locked
into place by flipping the tab up or down as shown above.
A.
B.
C.
BDS-220
2
Step #1 Materials:
step
1
# Description Qty.
1
1
2
4
2
4
1
2
4
5
6
9
Leg
Base
3/8" Button Head Allen Screw 2 3/4"L
3/8" Flat Washer
3/8" Lock Nut
Wheel
2
1
4
5
5
6
9
LOCKED
UNLOCKED

A.
BDS-220
3
Step #2 Materials:
step
2
#Description Qty.
1
1
2
4
2
1
3
4
5
6
Leg
Dumbbell Platform
3/8" Button Head Allen Screw 2 3/4"L
3/8" Flat Washer
3/8" Lock Nut
Attach the Dumbbell Platform (3) to the Leg (1) as shown.
Using the hardware shown, securely tighten the
Dumbbell Platform (3) to the Leg (1).
3
4
5
5
6
1

Dumbbell Platform
Hold Down Strap - Male
Hold Down Strap - Female
A.
B.
Attach the male and female ends of the Hold Down Strap (7 & 8) to the
Dumbbell Platform (3) as shown.
Each strap is secured by drawing the button end of the strap through the
cutout on the edge of the platform, folding the strap around the edge, and
snapping into place.
Once the Dumbbell Stand is in its desired position, the stand can be leveled
by adjusting the feet and locking them into place with the attached 3/8" nut.
BDS-220
4
Step #3 Materials:
step
3
#Description Qty.
1
2
2
3
7
8
OPTIONAL
FOOT PEGS
LEVEL ADJUSTMENT
NUT - ALSO ON WHEELS
7
8
3