Bradley Advocate AV Series User manual

Installation
215-1773 Rev. D; ECN 13-08-028
© 2014 Bradley
Page 1 of 80 1/21/2014
AV90
Advocate™ Lavatory System – AV-Series
U.S. Patent No. D663,016; D674,967
Other Patents Pending
Système de toilette Advocate™ – Série AV
Brevet américain n° D663,016; D674,967
Autres brevets en instance
Sistema de lavabo Advocate™ – Serie AV
Patente de EE. UU. N° D663,016; D674,967
Otras patentes pendientes

AV90 Installation
21/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
Table of Contents
Pre-Installation Information ............................................................................................ 2
Components ..................................................................................................... 3–5
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–8
Rough-Ins ...................................................................................................... 9–10
Frame and Bowl Assembly ........................................................................................... 11
Drain and P-trap ................................................................................................... 11
Faucet Supply Tube Assembly ........................................................................................ 12
Dryer Plenum Air Hose Assembly...................................................................................... 13
Soap and Dryer Plug-Ins...........................................................................................14-15
Valve Assembly.................................................................................................... 16
Transformer and Dryer Plug-In ........................................................................................ 17
Filling Soap Tank and Priming the Soap Spout ........................................................................... 17
Adjust the Temperature .............................................................................................. 18
Dryer Activation.................................................................................................... 18
Trap Cover........................................................................................................ 19
For Service: Soap and Dryer Plug-Ins .................................................................................. 20
For Service: Dryer Hood Reinstallation ................................................................................. 21
For Service: Faucet Connections...................................................................................... 21
Cleaning and Maintenance .........................................................................................22-23
Troubleshooting..................................................................................................24-27
Table des matièrees
Avant l’installation ................................................................................................... 2
Composants ......................................................................................................3-5
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Raccordements ...................................................................................................9-10
Montage du bâti et de la vasque....................................................................................... 11
Écoulement et siphon en P........................................................................................... 11
Montage du tube d’alimentation du robinet............................................................................... 12
Montage du tuyau d’air de plénum de sèche-mains........................................................................ 13
Branchements du distributeur de savon et du sèche-mains................................................................14-15
Montage des vannes................................................................................................ 16
Branchement du transformateur et du sèche-mains........................................................................ 17
Remplissage du réservoir de savon et amorçage du distributeur de savon...................................................... 17
Régler la température ............................................................................................... 18
Activation du sèche-mains ........................................................................................... 18
Couvre-siphon..................................................................................................... 19
Entretien : Branchements du distributeur de savon et du sèche-mains ......................................................... 20
Entretien : Remontage du capot de sèche-mains.......................................................................... 21
Entretien : Raccordement du robinet ................................................................................... 21
Nettoyage et entretien.............................................................................................22-23
Dépannage .....................................................................................................24-27
Contenido
Información previa a la instalación ...................................................................................... 2
Componentes .....................................................................................................3-5
Dimensiones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Colocación de tuberías empotradas ...................................................................................9-10
Conjunto de estructura y palangana.................................................................................... 11
Desagüe y sifón en P ............................................................................................... 11
Conjunto de tubo de suministro de la llave............................................................................... 12
Conjunto de manguera de aire de la cámara impelente del secador........................................................... 13
Elementos instalables de jabón y secador . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-15
Conjunto de la válvula............................................................................................... 16
Elemento instalable de transformador y secador .......................................................................... 17
Llenado del tanque de jabón y cebado del dispensador de jabón ............................................................. 17
Ajuste la temperatura ............................................................................................... 18
Activación del secador .............................................................................................. 18
Cubierta del sifón .................................................................................................. 19
Para realizar mantenimiento: Elementos instalables de jabón y secador ....................................................... 20
Para realizar mantenimiento: Reinstalación de la cubierta del secador ........................................................ 21
Para realizar mantenimiento: Conexiones de la llave ...................................................................... 21
Limpieza y mantenimiento .........................................................................................22-23
Solución de problemas ............................................................................................24-27

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 3
IMPORTANT!
Read this entire installation manual to ensure proper installation. When finished with the
installation, file this manual with the owner or maintenance department. Compliance and
conformity to local codes and ordinances is the responsibility of the installer. Product
warranties may be found under “Products” on our Web site at bradleycorp.com.
Separate parts from packaging and make sure all parts are accounted for before discarding
any packaging material. If any parts are missing, do not begin installation until you obtain the
missing parts.
Make sure that all water supply lines have been flushed and then completely turned off before
beginning installation. Debris in supply lines can cause valves to malfunction.
Hardware supplied by installer must be appropriate for wall construction. Wall anchors used
must have a minimum pull-out rating of 1,000 lbs.
Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to
installation. Electrical power MUST remain off until installation is completed. After installation
is complete, turn on the water supply first, then turn on the electrical power.
WARNING!
To Reduce The Risk Of Fire Or Electric Shock, DO NOT
Use This Fan With Any Solid-State Speed Control Device!!
NOTICE
With supervision or instruction, this device may be used by
preschool aged children and persons with special needs.
This is not a toy. Cleaning and maintenance shall only
be performed by qualified personnel.
Installation
THIS
SIDE
UP
Packing List
•
•
•
•

AV90 Installation
41/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
Basin (187-327)
Contact your Bradley representative
for color options.
Trap Cover — Coal (186-1865B)
Fastener Prepack (S45-2727)
Frame (S17-367)
Hardware Prepack Bowl/Frame
(S45-2732)
Drain Prepack (S45-2715)
Hardware Prepack
(S45-1794)
Washer, 1" Dia.
(142-002CG)
Washer, Square
(142-136)
Drain, Cap &
Strainer Prepack
(S45-2714)
Drain Adapter Prepack
(S45-2480)
P-trap
Plastic 1½" (269-1697)
Chrome-Plated 1½" (S27-094)
Components
(S83-210EU)
Power Cords
(S83-210UK)
(S83-210NA)

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 5
Components
Soap Spout Assembly
(S11-223C01) Faucet Spout Assembly
(S05-201C01)
Lead-Free Valve
TMA (S45-2489) is shown
TL (S45-2488) is similar
Sprayhead Harness
(S83-200)
Stops/Hoses Prepack (Lead-Free)
TMA (S45-2730)
TL (S45-2731)
Dryer Motor Assembly
(Hand Dryer Electric Fan)
120V (S39-835)
230V (S39-836)
#10 Screw
(160-416)
Soap Tank Gasket
(124-083)
Soap Tank
(240-034)
Peristaltic Tube
(269-2075)
Soap Pump Box
(S39-823)
Replacement Filter - Dryer
(269-2128)
230/24 VAC In Line
Soap/Faucet Transformer (S83-225)
120/24 VAC Class II Plug In
Soap/Faucet Transformer (S83-152)

AV90 Installation
61/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
Components
Upper Plenum Assembly
Lower Plenum Assembly Lower Plenum Assembly Prepack
(S45-2795)
Washer (142-002AZ)
#10 Screw
(P18-054)
Exhaust Hose
(269-2130)
Dryer Hood Base
(131-089tab)
Dryer Hood Cover
(107-633)
Upper Plenum
Ass'y. (S05-198)
Washer
(142-078)
10-24 x 1" Pan Head Screw
(160-353)
Upper Plenum Gasket
(124-086)
10-24 x 1-1/2" Screw
(160-256)
(Use ¹⁄₈" Hex Driver)
4-40 x 3/8" Pan Head Screw
(160-478)
Dryer Hood Window
(269-2098)
Circuit Board
(S83-206)
Hose Clamp
(269-678)
Washer (142-002AZ)
4-40 x 3/8" Pan Head Screw
(160-478)
Boss
Dryer Base Opening
Connector
Adhesive this side
Exhaust Hose
(269-2130)
Lower Plenum Gasket
(124-087)
Lower Plenum Assembly
(S05-199)
2-1/4" Stainless Steel
Hose Clamp (269-678)
#10 Screw
(P18-054)

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 7
Dimensions — Top and Front View
17"
(432mm)
13³⁄₈"
(340mm)
22¾"
(578mm)
19"
(483mm)
48"
(1219mm)
max. ADA
30"
(762mm)
min. ADA
30"
(762mm)
4³⁄₈"
(111mm)
45"
(1143mm)
5¼"
(133mm)
15½"
(394mm)
Front View
Top View
90"
(2286mm)
27½"
(699mm)
Clear floor
space (for
each station)
20⁵⁄₈"
(524mm)
36³⁄₈"
(924mm)
11⁵⁄₈"
(295mm)
12⁵⁄₈"
(321mm)
30"
(762mm)
90"
(2286mm)
30"
(762mm)
30"
(762mm)
3" (76mm)
30"
(762mm)
45"
(1143mm)

AV90 Installation
81/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
Dimensions — Side View (ADA)
Juvenile Height
Standard Height
Junior Height
* ADA ABA Guidelines, 2004; Chapter 6: Plumbing Elements and Facilities; 606.3 Height
22¾"
(578mm)
9" (229mm)
ADA min.*
6" (152mm)
ADA max.* 8" (203mm)
ADA min.*
17"
(432mm)
min.
22¾"
(578mm)
9"
(229mm)
ADA min.*
6" (152mm)
ADA max.*
8" (203mm)
ADA min.*
17"
(432mm)
min.
38¼"
(972mm)
35¼"
(895mm)
37"
(940mm)
ADA
max.*
40"
(1016mm)
ADA max.*
27"
(686mm)
ADA min.*
32"
(813mm)
34"
(864mm)
ADA max.*
36¼"
(921mm)
24"
(610mm)
ADA
min.*
29"
(737mm)
31"
(787mm)
ADA
max.*
33¼"
(845mm)
30¼"
(768mm)
14½"
(368mm)
30¼"
(768mm)
28¼"
(718mm)
26"
(660mm)
25¼"
(641mm)
24"
(610mm)
9⁵⁄₈"
(244mm)
33¼"
(845mm)
17½"
(445mm)
13¹⁄₈"
(333mm)
(faucet)
22¾"
(578mm)
13¹⁄₈"
(333mm)
(faucet)
13¹⁄₈"
(333mm)
(faucet)

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 9
TAS Height
Grades Pre-K
through 5 or 6
9"
(229mm)
ADA min.
37"
(940mm)
ADA max.
36¼"
(921mm)
34¼"
(870mm)
32"
(813mm)
ADA
max.
30"
(762mm)
28"
(711mm)
ADA min.
32¼"
(819mm)
30"
(762mm)
ADA max.
29¼"
(743mm)
28"
(711mm)
26"
(660mm)
ADA min.
9"
(229mm)
ADA min.
34¼"
(870mm)
34"
(864mm)
ADA max.
TAS Height
Grades 6 through 8 or 9
31¼"
(794mm)
15½"
(394mm)
Dimensions — Side View (TAS)
22¾"
(578mm)
6" (152mm)
ADA max.* 8" (203mm)
ADA min.*
17"
(432mm)
min.
13¹⁄₈"
(333mm)
(faucet)
22¾"
(578mm)
6" (152mm)
ADA max.* 8" (203mm)
ADA min.*
17"
(432mm)
min.
13½"
(343mm)
To comply with Texas Accessibility Standards for children, the hand washing station must be
mounted so the highest surface of the basin rim does not exceed 30" or 32" based on age or
grade level. For more information, contact the Texas Department of Licensing and Regulation.
13¹⁄₈"
(333mm)
(faucet)

AV90 Installation
10 1/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
25¾"
(654mm)
(3) places
Finished Floor
36⁵⁄₈"
(930mm)
24"
(610mm)
(3) places)
90"
(2286mm)
17⁵⁄₈"
(448mm)
2½"
(64mm)
20¼"
(514mm)
26½"
(673mm)
19"
(483mm)
CODE DESCRIPTION QTY.
H, C ½" nominal (⁵⁄₈" O.D. Comp.) Hot/Cold Supplies, Stub-Out 2" (51mm) From Wall 1
D 1½" NPT Drain, Stub-Out 2" (51mm) From Wall 3
E20-amp, 120-volt GFI Protected Electrical Outlet or 10-amp minimum circuit required for 230V (based on product selections) Circuit breaker to have a minimum instantaneous overload
current rating of 6 times the circuit breaker's ampere rating. 3
F #10 Anchors for Valve Bracket Installation 2
RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS
FOR CODES A, B, H, C, D and E FIXTURE STYLE
34" No Adjustment Standard
31" Subtract 3" Juvenile
26" Subtract 8" Junior
32" Subtract 2" TAS Grades 6 through 8 or 9
30" Subtract 4" TAS Grades Pre-K through 5 or 6
41¾"
(1060mm)
(electrical)
HC
ED
35½"
(902mm) 12¼"
(311mm)
34¹⁄₈"
(867mm)
6½"
(165mm)
10¼"
(260mm)
(electrical) 40¼"
(1022mm)
(electrical)
ED
D
1a Rough-Ins (hot/cold, drain, electrical, and valve)
5½"
(140mm)
C
L
24½"
(622mm)
Frame
Centerine
Notch
E
FF
If desired, hot and cold supply angle stops
can be attached to stub outs at this time.

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 11
Finished Floor
36¹⁄₈" REF
(918mm)
(6) places
17⁵⁄₈"
(448mm)
90"
(2286mm)
20¾"
(527mm)
(6) places
19"
(483mm)
9½"
(241mm)
(6) places
11¾" REF
(298mm)
29³⁄₈" REF
(746mm)
15¾"
(400mm) 15¾"
(400mm)
14¼"
(362mm)
30⁵⁄₈" REF
(778mm)
15¾"
(400mm)
⁵⁄₈" REF
(16mm)
38¾"
(984mm)
11¾" REF
(298mm)
11¾" REF
(298mm)
14¼"
(362mm)
8¾"
(222mm)
B
B
B
B
B
B
B
B
B
B
B
B
1b Backing Rough-Ins
Areas marked as require sufficient backing
compliant with local building codes. Anchor
hardware is not provided.
For clarity, the motor assembly is not shown.
C
L
AAAAA A
CODE DESCRIPTION QTY.
A³⁄₈" Bowl Anchors with a Minimum Pull-Out Force of 1,000 lbs. 6
B³⁄₈" Frame Anchors 12
RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS
FOR CODES A, B, H, C, D and E FIXTURE STYLE
34" No Adjustment Standard
31" Subtract 3" Juvenile
26" Subtract 8" Junior
32" Subtract 2" TAS Grades 6 through 8 or 9
30" Subtract 4" TAS Grades Pre-K through 5 or 6
See step 2 before drilling
basin anchors.
Remove white laser film from end caps
prior to installation of frame to wall.
BSecure the frame assembly to the wall at (12) locations marked "B"
using appropriate fasteners (1¼" square washers are provided). When
mounting is complete, check to ensure the frame assembly is level.
AInstall wall anchors per
local codes at locations
shown below.
*See Step 2 before
drilling basin anchors
27⁵⁄₈" REF.
(702mm)

AV90 Installation
12 1/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
2Frame and Bowl Assembly
When installed properly, the basin will be level and flush to the back wall.
For clarity, the pre-mounted soap spout, faucet spout,
dryer hood and air hoses are not shown.
If access through the basin is preferred, the dryer hood cover
must be removed. Refer to Step 4 for removal instructions.
A
Position the basin
onto the frame. The
right vertical frame
support will fit into
the basin notch as
shown.
BSecure the basin flange
to the back wall using
suitable ³⁄₈" fasteners
supplied by the installer.
Access the basin
flange from the
underside or through
the dryer hood
access hole. Refer
to page 12 for dryer
hood cover removal
instructions.
CSecure the bowls to the frame
with the six ¼"-20 x ³⁄₈" screws
(p/n 160-389) and washers
(p/n 142-002DB) provided.
Use the back
basin flange
as a template
to mark the
(2) mounting
hole locations
onto the wall.
After marking
the wall, install
suitable wall
anchors. See
step 1b.
Drain Cap Assembly
(S45-2714)
Drain Adapter
(111-091)
#10 Screw
P10-225
O-Ring
(125-111)
Packing Washer
(142-135)
P-trap
3Drain and P-Trap For clarity, the soap spout, faucet spout, dryer
hood and frame are not shown.
Do not overtighten the
screws on the drain adapter!
AInstall p-trap outlet to
stub out from wall.
BAssembly o-ring, drain
adapter and packing
washer to basin hub
with (4) #10 screws.
CAttach p-trap to
outlet and drain.
P-Trap Outlet
DUse ⁵⁄₆₄" hex driver to
install screw to drain
cap assembly.

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 13
4Faucet Supply Tube Assembly
A
Remove the #10
screw from the
underside of the
faucet body. Slide
the faucet spout
cover forward and
up.
BConnect the ¼" supply tube to the
faucet tube connector and feed the
tube through the basin access hole.
Faucet Spout
Cover
Basin
Access
Hole
Lap Joint
Faucet Circuit
Plug - Black
#10 Screw (Use ¹⁄₈" hex
driver to remove screw)
Compression
Nut
Faucet Adapter
CPosition the faucet spout cover onto
the faucet spout base (lap style).
Secure the faucet cover to the base
from beneath with the #10 screw.
Faucet Circuit
Plug - Green
Faucet Circuit
Plug - Red
¼" Red Supply Tube
¼" Green Supply Tube
¼" Black Supply Tube

AV90 Installation
14 1/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
AV30 is shown. AV90 is similar.
The dryer hood is factory-installed. For
clarity, the basin, soap assembly and
faucet assembly are not shown.
To Reinstall the Dryer Hood Cover
5Dryer Plenum Air Hose Assembly
APosition the dryer hood
cover tabs into the dryer
hood base pockets.
B
Secure the cover to the
base with the two #10 x
³⁄₈" screws. Use ¹⁄₈" hex
driver to remove screws.
AOrient worm gears
to sides so that dryer
hood can be closed.
Dryer Hood
Dryer Hood
Cover Tab
Dryer Hood
Base Pocket
ARemove (2) #10 x 1½"
screws (use ¹⁄₈" Hex
Driver) and lift cover up
and back to remove.
CAttach air hose from right upper dryer
plenum thru dryer hood base opening
and down to dryer motor assembly inlet.
BAttach air hose from left upper
dryer plenum thru dryer hood
base opening and down to
lower dryer plenum.
Upper Dryer Plenum
Air Hose (Attached
by Bradley)
Dryer Hood
Base Opening
Remove Dryer
Hood Cover

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 15
6Soap and Dryer Plug-Ins AV30 is shown. AV90 is similar.
Dryer Motor
Soap Pump
Soap Valve
AInsert the soap barrel plug
(from the wire harness) at
this location.
BInsert the dryer
connector plug (from
the upper dryer
hood) at this location.
Soap Pump
Box
Soap Supply
Tube
CInsert dryer power
cord at this location.
Dryer
ON/OFF
Switch

AV90 Installation
16 1/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
Faucet Circuit
Plug - Black
Transformer
Connector
AConnect the faucet circuit plug from
the faucet to the faucet circuit plug
from the wire harness (shipped
loose)
BConnect the wire harness
solenoid connector plug
to the valve circuit plug.
TMA valve is shown.
TL valve is similar.
Faucet Circuit
Plug from Wire
Harness ¼" Black
Supply Tube
7a Faucet/Gang Valve Circuit Plug Connection
Red
¼" Green
Supply Tube
¼" Red
Supply Tube
Faucet Circuit
Plug - Green
Faucet Circuit
Plug - Red
Green
Black

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 17
Supply Hose, Cold
½" x 24"
Supply Hose, Hot
½" x 24"
Valve,
Cold Supply
Valve, Hot
Supply
Angled Supply Stop
⁵⁄₈" O.D. x ³⁄₈" O.D.
7b Valve Assembly For clarity, the front dryer
hose is not shown.
ALoosen the compression nut. Push the supply
tube firmly into the tube connector until it is
seated. Retighten the compression nut by hand.
CAttach hot and cold
hoses to the valve.
BAttach angle stops to hot and cold
stub outs. Attach 1/2" supply hoses
to hot and cold supply stops.
D
Attach transformer circuit plug to
transformer connector plug on
gang valve bracket. attach gang
valve to the wall. See Step 1a for
valve bracket anchor locations.
Three-Station Valve
TMA Valve (S45-2489) is shown
TL Valve (S45-2488) is similar
Red
Green
Black
¼" Supply Tube (from
faucet) black, left hand
¼" Supply Tube (from
faucet) green, center ¼" Supply Tube (from
faucet) red, right hand

AV90 Installation
18 1/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
8Soap/Faucet, Transformer and Dryer Plug-In
9Filling the Soap Tank and Priming the Soap Spout
(Model AV-Series Soap-1)
A
Place the soap key into the keyhole
on the soap body base. Push the
soap key up and gently rotate back
until soap cover unlatches from the
soap body base. Rotate the soap
cover up.
Soap level indicator light; blinks
red when soap level is low.
ERotate the spout cover down and
clip the cover into the spout body.
#10-24
Flat Head
Security
Screw
(optional)
Contact
Bradley
D
After the soap system is primed, pour
soap into the soap fill hole to fill the (64-
ounce capacity) soap tank. An audible
"chirp" will sound and increase in intensity
when the tank is approaching 95% full.
To ensure optimal soap
dispenser performance,
wipe down soap nozzle
with warm water. This
will help prevent the
buildup of soap. C
Activate the soap spout by placing your hand
beneath the soap nozzle for 15 seconds.
Keep your hand in place once the soap
starts to activate for up to 30 seconds. After
8 to 12 activations, the pump has been
primed and your hand can be removed
from under the nozzle. The LED light will be
blinking green during the Auto Prime mode.
BPour 6-8 ounces of water
into the soap fill hole to
prime pump.
A
120V Installation: Plug the soap/faucet
transformer into the wall outlet at this location.
230V Installation: Affix the in-line soap/faucet
transformer on top of the left frame bracket.
Plug one of the two power cords from the wall
outlet to the inlet of the transformer.
CPlug the dryer motor power cord into the wall
outlet at this location (20 amp circuit required
for 120V installation. 10 amp minimum circuit
required for 230V installation).
DPlug the other end of the dryer motor power cord
into the dryer motor assembly (see page 14).
ETurn the dryer on/off switch to the
ON position.
120V installation shown.
BPlace your hand beneath the faucet to activate.
Purge the air from the supply line. See step 10
for water temperature adjustment.

Installation AV90
Bradley • 215-1773 Rev. D; ECN 13-08-028 1/21/2014 19
slowly
lentement
lentamente
langsam
Move hands forward
and backward.
The dryer cavity is illuminated
in white light during stand-
by mode and amber colored
during active mode.
To aid in cleaning, the dryer can be deactivated for 30
seconds. To deactivate the dryer, hold your hand beneath
the upper dryer hood at this location for three seconds. The
light will blink when the dryer is deactivated and will blink
again (after 30 seconds) when the dryer is reactivated.
11 Dryer Activation
ATest dryer activation by placing
hands into dryer cavity, moving
hands forward and backwards.
10 Adjust the Faucet's Water Temperature
This valve is NOT factory preset. Upon installation, the temperature of this
valve must be checked and adjusted to ensure delivery of a safe water
temperature. Water in excess of 110°F (43°C) may cause scalding.
H
C
ALoosen Cap Screw about 1/4" (4-6 turns)
and lift up cover (do not remove).
BUsing cover, turn cartridge gently until
desired water temperature is reached. Do
not turn past stops as this may damage
unit. Push cover down and tighten screw.
AV30 is shown. AV90 is similar.

AV90 Installation
20 1/21/2014 Bradley • 215-1773 Rev. D; ECN 13-08-028
End Cap
Return
Flange
Trap
Cover
End Cap
Bottom Tab
12 Trap Cover BRotate the trap cover up
and tuck the edges behind
the basin apron.
A
Position the bottom
of the trap cover
between the end cap
return flange and the
bottom tab.
C
Secure the trap
cover with two
#10 x ½" flat head
screws provided.
Use ¹⁄₈" hex driver
to install trap cover.
Tuck any loose wires into the
frame prior to installing the
trap cover to the frame.
AV30 is shown.
AV90 is similar.