Home Styles Glen Rock 88560736 User manual

A.
Top
1 pc.
B.
Table Frame
1 pc.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
C.
Leg
4 pcs.
88 5607 36
Head Cap Bolt
12 pcs. (+1 extra)
Glen Rock
Tall Square Dining Table
Wing Nut
4 pcs.
(On table top)
Flat Washer
4 pcs.
(On table top)
Hex Wrench
1 pc.
Tools recommended for assembly :Level
Part List
Hardware List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319

Assembly Instructions
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Place table top (A) upside down on a soft cloth.
Remove Table Frame (B) from Top (A)
by loosening and removing Wing Nuts and Flat Washers.
Note : The Wing Nuts and Flat Washers will be
used in Step 3.
STEP 1
Head Cap Bolt
B
A
Frozen precipitation may damage the top. Store inside in freezing weather.Note:
B
C
C
C
C
Attach unit to Top (A) with Flat Washers
and Wing Nuts from Step 1.
Turn unit to its’ upright position.
STEP 3
Wing Nut
Flat Washer
STEP 2
Attach Leg (C) to Table Frame (B)
with Head Cap Bolts.
To level the unit, adjust
the adjustable levelers on
the bottom of unit.
STEP 4
Wing Nut
Flat Washer
A