Home Styles 20 08000 0031 User manual

Hardware List
Part List
Home Styles Customer Service: www.homestyles-furniture.com,
[e-mail], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver, Level
20 08000 0031
Dining Table
IMPORTANT
A.
Top
1 pc.
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
B.
Top
1 pc.
C.
Leaf
1 pc.
D.
Table Slide
2 pcs.
E.
Leg
4 pcs.
Hex Wrench
1 pc.
Small Hex Wrench
1 pc.
M8x60
Head Cap Bolt (long)
8 pcs. (+1 extra)
Spring Washer
16 pcs. (+1 extra)
Flat Washer
16 pcs. (+1 extra)
M3.5x45
Wood Screw
16 pcs. (+1 extra)
M8x45
Head Cap Bolt
8 pcs. (+1 extra)

Assembly Instructions 2/3
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
The unit must be level to work properly. Use the included adjustable levelers to level.
Keep Hex Wrench and Wrench as the bolts may need to be tightened in the future.
Figure 2
Figure 4
Figure 3
Figure 1
A
B
D
D
Head Cap Bolt
Spring Washer
Flat Washer
STEP 2
Attach Top (A) and (B) by aligning metal pins
with holes and firmly pushing together.
Engage locks by turning lock handles clockwise 1/4 turn. (See Figure 2)
Attach Table Slides (D) to unit with Flat Washers, Spring Washers,
Head Cap Bolts and Wood Screws. (See Figures 3 and 4)
STEP 1
Place Tops (A) and (B) upside down on a soft cloth.
Remove Table Slides (D) from their packing position by removing
Head Cap Bolts Flat Washers., Spring Washers and (See Figure 1)
D
D
Wood Screw
A
B
Head Cap Bolt
Spring Washer
Flat Washer

Assembly Instructions 3/3
Figure 6
STEP 4
Turn table over to its’ upright position.
Disengage locks by turning lock handles counter-clockwise. (See Figure 6)
Pull out both ends of table, then place Leaf (C) in unit, aligning metal pins with holes.
Push table together firmly, then engage locks by turning lock handles clockwise 1/4 turn.
Level unit by adjusting the adjustable levelers on bottom of legs. (See Figure 7)
C
Figure 7
Figure 5
Spring Washer
Flat Washer
Heat Cap Bolt (long)
E
E
E
E
STEP 3
Attach Legs (E) to unit with Flat Washers,
Spring Washers and Heat Cap Bolts (long).
(See Figure 5)

NEVER
use glass cleaners on
finished furniture. Ammonia
chemically attacks the finish.
allow liquids to remain on furniture.
Absorption causes parts to warp
and split and finishes to delaminate.
NEVER
CARE INSTRUCTIONS
Do not use rubber
based placemats.
PREVENT
DISCOLORING
Do not use commercial
waxes and polishes.
PREVENT
YELLOWING
Do not place hot
objects on surface.
PREVENT
FINISH DAMAGE
Do not write
directly on surface.
PREVENT
MARKING
Do not use power tools
above 8 volts to assemble.
PREVENT
CRACKING
Do not place
in direct sunlight.
PREVENT
FADING
with a soft cloth moistened
in lukewarm soap and water.
Buff with a dry clean cloth.
CLEAN
Home Styles will provide replacements free of charge for missing or damaged hardware or parts within 30 days of
purchase. Digital images of the defective parts may be required. If the product was not purchased from an authorized
retail affiliate, Home Styles is under no obligation to provide replacement parts. Parts are not available for fully assembled
items nor are parts available for sale. Replacements for missing or damaged hardware or parts may be requested at:
www.homestyles-furniture.com/customer-service/replacement-parts
Home Styles Customer Service: www.homestyles-furniture.com,
[e-mail], 888-680-7460, 877-831-0319