
15
A
A
A
A
10
x 5
3,5x25
V3
Pour plus de simplicité de montage, après avoir effectué le préperçage.
Placez l’écrou dans la sellette, positionner-la et fixer-la comme montré sur
le gabarit. Ensuite, vissez le tube.
For easier assembly, after pre-drilling, place the nut in the fifth wheel, po-
sition it and fix it as shown on the template. Then screw on the tube.
ATTENTION : Effectuez le perçage des pré-trous avec une mèche de ø 3
mm sur 5mm de profondeur maximum
CAUTION : Drill the pre-holes with a ø 3mm drill bit to a maximum depth
of 5mm
D9
x 1