Braun ThermoScan IRT6030CA User manual

Français
ThermoScan®
Ear thermometer
Thermomètre auriculaire
IRT6030CA

1
Certain trademarks used under license from The Procter & Gamble Company or its afliates.
ThermoScan® and ExacTemp® are registered trademarks of Helen of Troy Limited and/or its afliates.
Certaines marques de commerce utilisées sous licence de The Procter & Gamble Company ou ses sociétés afliées.
ThermoScanMD et ExacTempMD sont des marques déposées de Helen of Troy Limited ou ses sociétés afliées.
© 2019 All rights reserved. / Tous droits réservés.
Manufactured for / Fabriqué par :
Kaz USA, Inc., a Helen of Troy Company
une société deHelen of Troy
400 Donald Lynch Blvd., Suite 300
Marlborough, MA 01752
Imported by / Importé par:
Kaz Canada, Inc., a Helen of Troy Company
une société deHelen of Troy
6700 Century Avenue, Suite 210
Mississauga, Ontario L5N 6A4
Patents / brevets : www.kaz.com/patents/braun
Designed in Germany. Made in Mexico.
Conçu en Allemagne. Fabriqué au Mexique.
0297
IRT6030CA
A002988R1
020819
English ................................1
Français................................14

2 3
English
The Braun ThermoScan®thermometer has been carefully developed for accurate, safe and fast
temperature measurements in the ear.
The shape of the thermometer probe prevents it from being inserted too far into the ear canal
which can hurt the eardrum.
However, as with any thermometer, proper technique is critical to obtaining accurate temperatures.
Therefore, read the instructions carefully and thoroughly.
The Braun ThermoScan®thermometer is indicated for intermittent measurement and monitoring
of human body temperature for people of all ages. It is intended for household use only.
Product description
Lens lter (Box of 21+40 bonus)
Probe tip
Probe
ExacTemp®light
Lens lter ejector
Display
Power button
Start button
Battery door
Protective cap
1
2
3
4
5
6
7
8
9
10
IRT6030CA
32
5
9
4
8
6
7
1
WARNINGS AND PRECAUTIONS
•Please consult your physician if you see symptoms such as unexplained
irritability, vomiting, diarrhea, dehydration, changes in appetite or activity,
seizure, muscle pain, shivering, stiff neck, pain when urinating, etc. in spite of
any colour of the background light or absence of fever.
The operating ambient temperature range for this thermometer is 10 – 40 °C (50 – 104 °F). Do not
expose the thermometer to temperature extremes (below –25 °C / –13 °F or over 55 °C / 131 °F) or
excessive humidity (> 95 % RH). This thermometer must only be used with genuine Braun
ThermoScan®lens lters (LF40).
To avoid inaccurate measurements always use this thermometer with a new, clean lens
lter attached.
If the thermometer is accidentally used without a lens lter attached, clean the lens
(see «Care and cleaning» section). Keep lens lters out of reach of children.
This thermometer is intended for household use only. This product is not intended to diagnose any
disease, but is a useful screening tool for temperature. Use of this thermometer is not intended as
a substitute for consultation with your physician.
Do not modify this equipment without authorization of the manufacturer.
Parents/guardians should call the pediatrician upon noticing any unusual sign(s) or symptom(s).
For example, a child who exhibits irritability, vomiting, diarrhea, dehydration, seizure, changes in
appetite or activity, even in the absence of fever, or who exhibits a low temperature, may still need
to receive medical attention.
Children who are on antibiotics, analgesics, or antipyretics should not be assessed solely on
temperature readings to determine the severity of their illness.
Temperature elevation may signal a serious illness, especially in adults who are old, frail, have a
weakened immune system, or neonates and infants. Please seek professional advice immediately
when there is a temperature elevation and if you are taking temperature on:
• Neonates and infants under 3 months (consult your physician immediately if the temperature
exceeds 37.4 °C or 99.4 °F)
• Individuals over 60 years of age (Fever may be blunted or even absent in elderly individuals.)
• Individuals having diabetes mellitus or a weakened immune system (e.g. HIV positive, cancer
chemotherapy, chronic immunosuppressant treatment, splenectomy)
• Individuals who are bedridden (e.g. stroke, chronic illness, paraplegia, quadriplegia, recovering
from surgery)
• A transplant recipient (e.g. liver, heart, lung, kidney)
This thermometer contains small parts that can be swallowed or produce a choking hazard to
children. Always keep the thermometer out of children’s reach.
10

4 5
English
Body temperature
Normal body temperature is a range. It varies by site of measurement, and it tends to
decrease with age. It also varies from person to person and uctuates throughout the
day. Therefore, it is important to determine normal temperature ranges. This is easily
done using Braun ThermoScan®. Practice taking temperatures on yourself and healthy
family members to determine the normal temperature range.
Note: When consulting your physician, communicate that the ThermoScan®temperature
is a temperature measured in the ear and, if possible, note the individual’s normal
ThermoScan®temperature range as additional reference.
How does Braun ThermoScan®work?
Braun ThermoScan®measures the infrared heat generated by the
eardrum and surrounding tissues. To help avoid inaccurate temperature
measurements, the probe tip is warmed to a temperature close to that of the
human body. When the Braun ThermoScan®is placed in the ear, it continuously
monitors the infrared energy. The measurement is nished and the result
displayed when the thermometer detects that an accurate temperature
measurement has been taken.
Why measure in the ear?
The goal of thermometry is to measure core body temperature1 , which is the
temperature of the vital organs. Ear temperatures accurately reect core body
temperature2, since the eardrum shares blood supply with the temperature
control center in the brain3, the hypothalamus. Therefore, changes in body
temperature are reected sooner in the ear than at other sites. Axillary
temperatures measure skin temperature and may not be a reliable indicator of
core body temperature. Oral temperatures are inuenced by drinking, eating
and mouth breathing. Rectal temperatures often lag behind changes in core
body temperature and there is a risk of cross-contamination.
1
How to use your Braun ThermoScan®
Remove protective cap.
1. Guyton A C, Textbook of medical physiology, W.B. Saunders, Philadelphia, 1996, p 919
2. Guyton A C, Textbook of medical physiology, W.B. Saunders, Philadelphia, 1996, p 754-5
3. Netter H F, Atlas of Human Anatomy, Novartis Medical Education, East Hanover, NJ, 1997, pp 63, 95.
2Push the Power button .
During an internal self-check, the display shows all segments.
Then the last temperature taken will be displayed for 5 seconds.
3The lens lter indicator will blink to signal one
is needed.
To achieve accurate measurements, make sure
a new, clean lens lter is in place before each
measurement.
Attach a new lens lter by pushing the
thermometer probe straight into the lens lter
inside the box and then pulling out.
Note: The Braun ThermoScan®will not work
unless a lens lter is attached.
4Fit the probe snuggly into the ear canal, then
push and release the Start button .
ExacTemp®light will pulse while temperature is in progress. The
light will remain solid for 3 seconds to indicate that a successful
temperature reading has been achieved.
NOTE: If the probe has been properly inserted into the ear canal
during the measurement, a long beep will sound to signal the
completed measurement.
If the probe has NOT been constantly placed in a stable position in
the ear canal, a sequence of short beeps will sound, the ExacTemp
light will go out and the display will show an error message
(POS = position error).
See «Errors and troubleshooting»section for more information.
5

6 7
English
6The conrmation beep indicates that an accurate temperature
measurement has been taken. The result is shown on the display.
Temperature displays.
For the next measurement, press Eject button
to remove and discard used lens lter, and put on
a new, clean lens lter.
NOTE: Defaults to last age setting used if you do
not change.
The Braun ThermoScan®ear thermometer turns
off automatically after 60 seconds of inactivity.
The thermometer can also be turned off by
pushing the Power button and holding it
for 3 seconds.
The display will briey ash OFF and it will
go blank.
7
Temperature taking hints
Always replace disposable lens lters to maintain accuracy and hygiene. The right ear
measurement may differ from the measurement taken in the left ear. Therefore, always take the
temperature in the same ear. The ear must be free from obstructions or excess earwax build-up
to take an accurate reading.
External factors may inuence ear temperatures, including when an individual has:
Factor Yes affects
Poor probe placement
Used lens lter
Dirty lens
In the cases below, wait 20 minutes prior to taking a temperature.
Factor Yes affects
Extreme hot and cold room temperature
Hearing aid
Lying on pillow
Use the untreated ear if ear drops or other ear medications have been placed
in the ear canal.
Memory mode
1The last temperature taken is stored in its memory
and will be automatically displayed for 5 seconds
when it is turned on again.
Night light feature
15 sec
The thermometer includes a convenient night light to illuminate
the display in a dim environment.
The light will turn on when you press any button. It will stay on
until the thermometer is inactive for up to 15 seconds even after
temperature is taken.
Your Braun ThermoScan®is shipped with the Celsius (°C) temperature scale activated. If you wish
to switch to Fahrenheit (°F) and/or back from Fahrenheit to Celsius, proceed as follows:
Make sure the thermometer is turned off.
Press and hold down the Power button . After about 3 seconds
the display will show this sequence: °C / SET / °F / SET ...
Release the Power button when the desired temperature scale is
shown. There will be a short beep to conrm the new setting, then the
thermometer is turned off automatically.
1
2
3
Changing the temperature scale

8 9
English
Care and cleaning
The probe tip is the most delicate part of the thermometer.
It must be clean and intact to ensure accurate readings.
If the thermometer is ever accidentally used without a lens lter,
clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or soft cloth moistened with
alcohol. After the alcohol has completely dried out, you can put a new lens
lter on and take a temperature measurement.
If the probe tip is damaged, please contact your local service centre.
Use a soft, dry cloth to clean the thermometer display and exterior. Do not use
abrasive cleaners. Never submerge this thermometer in water or any other liquid.
Store thermometer and lens lters in a dry location free from dust and contamination
and away from direct sunlight.
Additional lens lters (LF40) are available at most stores carrying Braun ThermoScan®.
Insert new batteries when the battery symbol appears
on the display.
Open the battery compartment. Remove the batteries and replace
with new batteries, making sure the poles are in the right direction.
Snap battery door into place.
1
2
3
Only discard empty batteries. To protect the environment, dispose of empty
batteries at your retail store or at appropriate collection sites according to
national or local regulations.
Calibration
The thermometer is initially calibrated at the time of manufacture. If this thermometer
is used according to the use instructions, periodic re-adjustment is not required. If at
any time you question the accuracy of the temperature measurement, please contact
your authorized service center.
Manufacturing date is given by the LOT number located in the battery compartment.
The rst three (3) digits after LOT represent the Julian date that the product was
manufactured and the next two (2) digits represent the last two numbers of the
calendar year the product was manufactured. The last identiers are the letters that
represent the manufacturer.
An example: LOT 11614K, this product has been manufactured on the 116th day of the
year 2014.
Replacing the batteries
Errors and troubleshooting
Situation
No lens lter is attached.
The thermometer probe was not
positioned securely in the ear.
An accurate measurement
was not possible.
POS = position error
Ambient temperature is not within
the allowed operating range
(10 – 40 °C or 50 – 104 °F).
Temperature taken is not within
typical human temperature range
(34 – 42.2 °C or 93.2 – 108 °F).
HI = too high
LO = too low
System error – self-check display ashes
continuously and is not followed by the
ready beep and the ready symbol.
If error persists,
If error still persists,
Battery is low, but thermometer will still
operate correctly.
Battery is too low to take correct
temperature measurement.
Error Message Solution
Attach new, clean lens lter.
Make sure that the positioning of the
probe is correct and remains stable.
Replace lens lter and reposition.
Press Start button to begin a new
measurement.
Allow the thermometer to remain for
30 minutes in a room where
the temperature is between 10
and 40 °C or 50 and 104 °F.
Make sure the probe tip and lens are
clean and a new, clean lens lter is
attached. Make sure the thermometer
is properly inserted. Then, take a new
temperature.
Wait 1 minute until the thermometer
turns off automatically, then turn
on again.
... reset the thermometer by removing
the batteries and putting them back in.
… please contact your local service
centre.
Insert new batteries.
Insert new batteries.

10 11
English
Product specifications
Displayed temperature range: 34 – 42.2 °C (93.2 – 108 °F)
Operating ambient temperature range: 10 – 40 °C (50 – 104 °F)
Storage temperature range: -25 – 55 °C (-13 – 131 °F)
Operating and storage relative humidity: 10 – 95 %RH (non condensing)
Display resolution: 0.1 °C or °F
Accuracy for displayed temperature range Maximum Laboratory Error
35 °C – 42 °C (95 °F – 107.6 °F): ± 0.2 °C (± 0.36 °F)
outside this range: ± 0.3 °C (± 0.54 °F)
clinical repeatability: ± 0.14 °C (± 0.26 °F)
Battery life: 2 years / 350 measurements
Service life: 5 years
This thermometer is specied to operate at 1 atmospheric pressure or at altitudes with an
atmospheric pressure up to 1 atmospheric pressure (700-1060hPa).
IP22
See Instruction
for use
Type BF Applied Part
10 °C
40 °C
Operating temperature
Subject to change without notice.
This appliance conforms to the following standards:
Standard Reference Edition Title:
ISO 80601-2-56:2017 Medical electrical equipment – Part 2-56: Particular requirements for basic
safety and essential performance of clinical thermometers for body temperature measurement.
IEC 60601-1: 2012 Medical electrical equipment – Part 1: General requirements for basic safety and
essential performance.
ISO 14971:2007 Medical devices – Application of risk management to medical devices.
EN ISO 10993-1: 2009 Biological evaluation of medical devices – Part 1:
Evaluation and Testing within a risk management process.
IEC 60601-1-2:2014 - Medical Electrical Equipment – Part 1-2: General requirements for basic safety
and essential performance – Collateral Standard: Electromagnetic disturbances – Requirements and
tests
IEC 60601-1-11: 2010 Medical electrical equipment -- Part 1-11: General requirements for basic
safety and essential performance -- Collateral standard: Requirements for medical electrical
equipment and medical electrical systems used in the home healthcare environment.
This product conforms to the provisions of the EC directive 93/42/EEC.
Medical electrical equipment needs special precautions regarding EMC. For detailed description of
EMC requirements please contact your authorized local service centre (See guarantee card).
Portable and mobile RF communications equipment can affect Medical electrical equipment.
Please do not dispose of the product in the household waste at the end of its useful life.
To protect the environment, dispose of empty batteries at appropriate collection sites
according to national or local regulations.
-25 °C
55 °C
Storage temperature
Limited three year warranty
You should first read all Instructions before attempting to use this product.
A. This 3 year limited warranty applies to repair or replacement of product found to be defective in
material or workmanship. This warranty does not apply to damage resulting from commercial,
abusive, unreasonable use or supplemental damage. Defects that are the result of normal wear
and tear will not be considered manufacturing defects under this warranty. KAZ IS NOT LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.
Some jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages or limitations on how long an implied warranty lasts, so the above limitations or
exclusions may not apply to you. This warranty gives you specific legal rights, and you also may
have other rights which vary from jurisdiction to jurisdiction. This warranty applies only to the
original purchaser of this product from the original date of purchase.
B. At its option, Kaz will repair or replace this product if it is found to be defective in material or
workmanship.
C. This warranty does not cover damage resulting from any unauthorized attempts to repair or
from any use not in accordance with the instruction manual.
Call us toll-free at 1-800-477-0457 or e-mail: [email protected]
Please be sure to specify a model number.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS
FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE PRODUCT TO THE ORIGINAL
PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE THERMOMETER HOUSING
YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE
PRODUCT OR PERSONAL INJURY.

12 13
IRT6030CA
IRT6030CA
IRT6030CA
IRT6030CA
Guidance and manufacturer's declaration - RF wireless communication equipment immunity
Test
frequency
(MHz)
Band a)
(MHz)
Service a) Modulation b) Maximum
power
(W)
Distance
(m)
IMMUNITY
TEST LEVEL
(V/m)
385 380 - 390 TETRA 400
Pulse
modulation b)
18 Hz
1,8 0,3 27
450 430 - 470
GMRS 460,
FRS 460
FM c)
± 5 kHz deviation
1 kHz sine
2 0,3 28
710
704 - 787
LTE Band 13,
17
Pulse
modulation b)
217 Hz
0,2 0,3
9745
780
810
800 - 960
GSM 800/900,
TETRA 800,
iDEN 820,
CDMA 850,
LTE Band 5
Pulse
modulation b)
18 Hz
2
0,3
28
870
930
1720
1700 -
1990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1, 3,
4, 25; UMTS
Pulse
modulation b)
217 Hz
2 0,3 28
1845
1970
2450
2400 -
2570
Bluetooth,
WLAN,
802.11 b/g/n,
RFID 2450,
LTE Band 7
Pulse
modulation b)
217 Hz
2 0,3 28
5240
5100 -
5800
WLAN 802.11
a/n
Pulse
modulation b)
217 Hz
0,2 0,3 9
5500
5785
a)
For some services, only the uplink frequencies are included.
b)
The carrier shall be modulated using a 50 % duty cycle square wave signal.
c)
As an alternative to FM modulation, 50 % pulse modulation at 18 Hz may be used because while it does not
represent actual modulation, it would be worst case.

14 15
Français
Le thermomètre ThermoScanMD Braun a été conçu avec soin pour prendre des mesures de
température auriculaire précises et rapides en toute sécurité.
La forme de sa sonde empêche tout risque d’insertion trop profonde dans le conduit auditif, de
manière à ne pas endommager le tympan.
Cependant, comme pour tous les thermomètres, l’utilisation d’une technique adéquate est
essentielle pour l’obtention de températures précises. Nous vous invitons donc à lire attentivement
l’intégralité des instructions d’utilisation.
Le thermomètre ThermoScanMD Braun est indiqué pour la mesure et le contrôle intermittents de
la température du corps humain chez les personnes de tous les âges. Il est réservé à un usage
domestique.
Description du produit
Embout jetable (Boîte de 21 + 40 en prime)
Lentille
Sonde
Voyant lumineux ExacTempMD
Éjecteur d’embout jetable
Écran
Bouton Marche/arrêt
Bouton de démarrage
Couvercle du compartiment à piles
Capuchon protecteur
1
2
3
4
5
6
7
8
9
10
IRT6030CA
32
5
9
4
8
6
7
1
MISES EN GARDE ET PRÉCAUTIONS
•Consultez votre médecin si vous observez des symptômes tels qu’une irritabilité
inexpliquée, des vomissements, une diarrhée, une déshydratation, des changements
d’appétit ou d’activité, des convulsions, une douleur musculaire, des tremblements,
une raideur du cou, une douleur lors de la miction, etc., malgré la couleur du
rétroéclairage ou l’absence de èvre.
La plage de température ambiante de fonctionnement de ce thermomètre est de 10 à 40 °C
(50à 104 °F). N’exposez pas le thermomètre à des températures extrêmes (inférieures à –25 °C /
–13 °F ou supérieures à 55 °C / 131 °F) ou à une humidité excessive (> 95 % HR). N’utilisez que
des embouts jetables (LF40) ThermoScanMD Braun d’origine avec ce thermomètre.
Pour éviter de prendre des mesures inexactes, utilisez toujours ce thermomètre avec un nouvel
embout jetable propre xé.
Si vous utilisez par mégarde le thermomètre sans embout jetable xé, nettoyez la lentille (voir la
section « Entretien et nettoyage »). Gardez les embouts jetables hors de la portée des enfants.
Ce thermomètre n’est conçu que pour un usage domestique. Cet appareil n’est pas conçu pour di-
agnostiquer une maladie, mais constitue un outil utile de dépistage de la température. L’utilisation
de ce thermomètre ne sert pas à remplacer la consultation de votre médecin.
Ne modiez pas cet appareil sans l’autorisation du fabricant.
Les parents ou tuteurs devraient appeler le pédiatre lorsqu’ils remarquent un signe ou un
symptôme inhabituel.
Par exemple, un enfant qui montre les signes suivants, irritabilité, vomissements, diarrhée, déshy-
dratation, convulsions, modications de l’appétit ou de l’activité, même en l’absence de èvre, ou
dont la température est basse, peut quand même nécessiter des soins médicaux.
Chez les enfants sous antibiotiques, analgésiques ou antipyrétiques, la gravité de la maladie ne
doit pas être évaluée sur la seule base des mesures de température.
L’élévation de la température peut signaler une maladie grave, notamment chez les nouveau-nés
et les enfants en bas âge ou bien chez les personnes âgées fragiles, dont le système immunitaire
est affaibli.
Consultez le médecin sans délai en cas de poussée de èvre ou lors d’une prise de température
dans les cas suivants:
• nouveau-né ou nourrisson de moins de 3 mois. Consultez immédiatement le médecin si la
température dépasse 37,4 °C ou 99,4 °F
• Les personnes souffrant de diabète ou dont le système immunitaire est affaibli (par ex. séropos-
itives, sous chimiothérapie pour le traitement du cancer, sous traitement immunosuppresseur
chronique, splénectomie)
• Les personnes alitées (par ex. parplégie, quadriplégie, AVC, maladie chronique, convalescence
chirurgicale, des centres d’hébergement et de soins de longue durée, de traitement pour
accidents vasculaires cérébraux, maladies chroniques, convalescence postopératoire, par
exemple)
• Un receveur de greffe (foie, coeur, poumon, rein, par exemple).
Ce thermomètre contient de petites pièces qui peuvent être avalées ou entraîner un risque de
s’étouffer chez les enfants. Gardez toujours le thermomètre hors de la portée des enfants.
10

16 17
Français
Température corporelle
La température corporelle normale est donnée sous forme de plage. Elle varie selon le
site de mesure et a tendance à diminuer avec l’âge. Elle varie aussi d’une personne à
l’autre et uctue durant la journée. Par conséquent, il est important de déterminer les
plages normales de température. C’est facile avec le ThermoScanMD Braun. Exercez-
vous à prendre des mesures de température sur vous-même et des membres en santé
de la famille an de déterminer leur plage normale de température.
Remarque : Lorsque vous consultez votre médecin, dites-lui que la température a été
prise dans l’oreille avec un thermomètre ThermoScanMD et, si possible, notez la plage
normale de température de la personne prise avec le ThermoScanMD comme référence
additionnelle.
Comment le ThermoScan Braun fonctionne-t-il ?
Le thermomètre ThermoScan Braun mesure la chaleur infrarouge émise par
le tympan et les tissus environnants. Pour éviter les mesures de température
imprécises, la lentille est chauffée à une température proche de celle du corps
humain. Lorsque le thermomètre ThermoScan Braun est placé dans l’oreille,
il mesure l’énergie infrarouge en continu. La mesure se termine, le résultat
s’afche lorsque le thermomètre détecte qu’une mesure de température
précise a été effectuée.
Pourquoi prendre les mesures dans l’oreille ?
L’objectif de la thermométrie est de mesurer la température centrale du
corps1, qui correspond à la température des organes vitaux. La température
auriculaire reète précisément la température corporelle centrale, le tympan
étant irrigué par les mêmes ux sanguins que l’hypothalamus, qui est le
centre de régulation de la température du cerveau. Par conséquent, les
changements de température corporelle se reètent plus rapidement dans
l’oreille que dans les autres parties du corps. La température axillaire mesure
la température de la peau et ne constitue pas toujours un indicateur able
de la température corporelle centrale. La température buccale est inuencée
par la consommation de boissons et d’aliments et par la respiration buccale.
La température rectale reète souvent avec retard la température corporelle
centrale et il existe en outre un risque de contamination croisée.
1. Guyton A C, Textbook of medical physiology, W.B. Saunders, Philadelphia, 1996, p 919
2. Guyton A C, Textbook of medical physiology, W.B. Saunders, Philadelphia, 1996, p 754-5
3. Netter H F, Atlas of Human Anatomy, Novartis Medical Education, East Hanover, NJ, 1997, pp 63, 95.
1
Comment utiliser votre ThermoScan Braun ?
Retirez le capuchon protecteur.
2Appuyez sur le bouton Marche/arrêt .
Pendant un autocontrôle interne, tous les voyants s’afchent à l’écran.
La dernière température prise s’afche ensuite pendant 5 secondes.
3L’indicateur d’embout jetable clignote pour
signaler qu’un embout jetable est nécessaire.
Pour obtenir des mesures précises,
assurez-vous qu’un nouvel embout jetable
propre est installé avant chaque relevé de
température.
Fixez un nouvel embout jetable en poussant
la sonde du thermomètre directement dans
l’embout jetable à l’intérieur de la boîte, puis
en la ressortant.
Remarque : Le thermomètre ThermoScan
Braun ne fonctionne pas tant qu’il ne
comporte pas d’embout jetable.
4Ajustez bien la sonde dans le conduit
auditif, puis poussez et relâchez le bouton
de démarrage .
Le voyant lumineux ExacTempMD clignote pendant la prise de
température. Le voyant lumineux reste xe pendant 3 secondes pour
indiquer que la mesure de la température est terminée.
REMARQUE : Si la sonde a été correctement introduite dans le
conduit auditif pendant la mesure, un long bip signale la n de la
mesure.
Si la sonde n’a PAS été placée dans une position stable et
constante dans le conduit auditif, une série de bips courts retentit,
le voyant lumineux ExacTemp s’éteint et l’écran afche un message
d’erreur (POS = erreur de position).
Pour plus de détails, voir la section « Erreurs et dépannage ».
5