Breville 800CP User manual

800CP
the Citrus Press

CONGRATULATIONS
on the purchase of your Breville Product

3
CONTENTS
4 Breville recommends safety first
6 Know your Breville Product
8 Assembling your Breville Product
11 Operating your Breville Product
14 Disassembling your
Breville Product
16 Care & Cleaning
18 Hints & Tips
20 Troubleshooting

4
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE FOR
FUTURE REFERENCE
• Carefully read all instructions before
operating and save for future reference.
• Before use fully unwind the power cord.
• Always use the Citrus Press on a dry,
level surface.
• Remove any promotional stickers before
using the Citrus Press.
• Always make sure the Citrus Press is
properly assembled before connecting
the plug and switching on at the power
outlet and switching ON the ON/OFF
button on the appliance. The appliance
will not operate unless properly
assembled.
• Always switch the appliance OFF at the
ON/OFF button, then switch off at the
power outlet and remove the plug if the
appliance is left unattended, if not in
use, if moved or dismantled for cleaning
and when storing.
• Do not let the cord hang over the edge
of a table or counter, touch hot surfaces,
or become knotted.
• Do not place this appliance on or near
a hot gas or electric burner, or where it
could touch a heated oven.
• Do not leave the appliance unattended
when in use.
• Use caution when operating the
appliance – do not place hands or fingers
near moving or rotating parts.
• Avoid placing hands or fingers near
Juicing Press Arm mechanism at rear of
Motor Base when moving Juicing Press
Arm into the upright position.
BREVILLE RECOMMENDS SAFETY FIRST
At Breville we are very safety conscious. We design and manufacture consumer products with
the safety of you, our valued customer, foremost in mind. In addition we ask that you exercise
a degree of care when using any electrical appliance and adhere to the following precautions.
• This appliance is not intended for use
by young children or infirm persons
without supervision.
• Young children should be supervised to
ensure that they do not play with
the appliance.
• Do not immerse power cord or motor
base in water or any other liquid.
• The installation of a residual current
device (safety switch) is recommended
to provide additional safety protection
when using electrical appliances. It
is advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
• Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
• Strictly follow cleaning and
care instructions.
• Regularly inspect the supply cord, plug
and actual appliance for any damage. If
found damaged in anyway, immediately
cease use of the appliance and return
the entire appliance to the nearest
authorised Breville service centre for
examination, replacement or repair.
IMPORTANT SAFEGUARDS

5
5
BREVILLE RECOMMENDS SAFETY FIRST
IMPORTANT SAFEGUARDS FOR
ALL ELECTRICAL APPLIANCES
• Fully unwind the power cord before use.
• Do not let the power cord hang over
the edge of a bench or table, touch hot
surfaces or become knotted.
• To protect against electric shock do not
immerse the power cord, power plug or
appliance in water or any other liquid.
• The appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure
that they do not play with the appliance.
• It is recommended to regularly inspect
the appliance. To avoid a hazard do not
use the appliance if power cord, power
plug or appliance becomes damaged in
any way. Return the entire appliance to
the nearest authorised Breville Service
Centre for examination and/or repair.
• Any maintenance other than cleaning
should be performed at an authorised
Breville Service Centre.
• This appliance is for household use only.
Do not use this appliance for anything
other than its intended use. Do not use
in moving vehicles or boats. Do not use
outdoors. Misuse may cause injury.
SAVE THESE INSTRUCTIONS

KNOW
your Breville Product

7
PAGE HEADER.....
E
D
KNOW YOUR BREVILLE PRODUCT
A. Juice Press Arm
Patented juicing handle features a
unique triple hinged arm to ensure
downward pressure throughout the
juicing process to maximize juice yield.
B. Stainless Steel Filter
(dishwasher safe)
C. Powerful Motor
Automatically starts when pressure is
applied to the Juicing Cone.
D. ON/OFF Button
E. Cord Storage
Wraps around and clips into position
under Motor Base (not shown in picture).
F. Soft Grip Handle
Makes juicing easy.
G. Fruit Dome
Is easily removed for cleaning.
(dishwasher safe)
AF
H. Die Cast Stainless Steel Juicing Cone
Uniquely finned and undulating cone
extracts the maximum juice from all
sizes of citrus fruit.
(dishwasher safe)
I. Juice Collector
Collects the juice to flow out the
Juice Spout.
(dishwasher safe)
J. Juice Spout
Opens all the way for cleaning with
anti-drip stop function.
K. Double Stage Switching System
Juicer will NOT operate unless it is
correctly assembled for safety and
performance.
K
B
C
G
H
J
I

ASSEMBLING
your Breville Product

9
ASSEMBLING YOUR BREVILLE PRODUCT
ASSEMBLING THE CITRUS PRESS
1. Pull the juice press arm up and
backwards, away from the motor base,
until fully extended.
2. Place the juice collector onto the drive
shaft on top of the motor base, ensuring
the juice spout fits into the semi-circular
groove at the front of the motor base.
3. Insert the stainless steel filter into the
juice collector, aligning the indent with
arrow in the bottom of the filter over
the corresponding tab with arrow in the
juice collector.
4. Place the juicing cone onto the drive
shaft and press down lightly to lock the
cone into position.

10
ASSEMBLING YOUR BREVILLE PRODUCT
5. Insert the fruit dome onto the underside
of the juice press arm by aligning the tab
on top of the fruit dome with the hole in
the juice press arm. Hold onto the juice
press arm and press the fruit dome up
and backwards until the dome locks into
position.
NOTE
The fruit dome is keyed, and can
only be inserted in one way (this will
ensure that it does not rotate through
operation).
6. Ensure the anti-drip juice spout is
pushed down into the pouring position.
7. Place a suitable sized glass or jug
underneath the juice spout.