Breville Temp Adjust LSG842 User manual

the Temp AdjustTM
Instruction Book - LSG842

2
BREVILLE
RECOMMENDS
SAFETY FIRST
At Breville we are very safety
conscious. We design and
manufacture consumer
products with the safety of you,
our valued customer, foremost
in mind. In addition, we ask
that you exercise a degree of
care when using any electrical
appliance and adhere to the
following precautions.
IMPORTANT
SAFEGUARDS
READ ALL INSTRUCTIONS
BEFORE USE AND SAVE
FOR FUTURE REFERENCE
• Carefully read all instructions
before operating and save for
future reference.
• Remove and safely discard
any packaging material or
promotional labels before
using the sandwich press for
the first time.
• To eliminate a choking hazard
for young children, remove and
safely discard the protective
cover fitted to the power plug
of this sandwich press.
• Always ensure the sandwich
press is properly assembled
before use. Follow the
instructions provided in
this book.
• Do not place the sandwich
press near the edge of a bench
or table during operation.
• Ensure the surface is level,
clean and free of water, etc.
• Do not use on a sink
drain board.
2 Breville Recommends Safety First
6 Components
7 Functions
8 Hints & Tips
9 Care, Cleaning & Storage
Contents

3
• Always operate the sandwich
press on a stable and heat
resistant surface. Do not use on
a cloth-covered surface, near
curtains or other flammable
materials.
• Keep the sandwich press clear
of walls, curtains and other heat
or steam sensitive materials.
• Do not place the sandwich
press on or near a hot gas or
electric burner, or where it
could touch a heated oven. Use
the sandwich press well away
from walls.
• Provide adequate space
above and on all sides for
air circulation around the
sandwich press.
• Do not place the sandwich
press on any surface that may
be affected by heat.
The use of a heat resistant
mat is recommended on
these surfaces.
• The sandwich press is not
intended to be operated by
means of an external
timer or separate remote
control system.
• Do not touch hot surfaces.
Use the handle to lift and open
the top plate.
• Always remove the sandwich
from the sandwich press with
a heat proof plastic spatula.
Never use your hands.
• Do not use sharp objects or
utensils inside the sandwich
press as they scratch or damage
the interior surface of the hot
cooking plate.
• Do not leave the sandwich press
unattended when in use.
• When operating the sandwich
press, ensure the power cord is
kept away from any heat source
including the surface of
the sandwich press. Ensure the
power cord does not become
trapped between the upper and
lower hot plates of the sandwich
press during use and storage.
• Do not place anything on top of
the sandwich press when the lid
is closed, when in use and
when stored.
• Always switch the sandwich
press off at the power outlet,
then unplug and allow to cool if
it is not in use, before
cleaning, before attempting to
move and when storing.
• Do not use chemicals, steel wool,
metal scouring pad, or abrasive
cleaners to clean the sandwich
press as these can damage the
housing or the coating of the
cooking plates.
• Keep the exterior housing and the
non-stick cooking plates clean.
Follow the cleaning instructions
provided in this book.

4
WARNING
Hot surfaces do not touch.
WARNING
This appliance is marked with a
hot surface symbol, the lid and
outer surface will be hot when
the appliance is operating and
for some time after use.
IMPORTANT
SAFEGUARDS
FOR ALL
ELECTRICAL
APPLIANCES
• Fully unwind the power cord
before use.
• Connect only to 230V or 240V
power outlet.
• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• To protect against electric
shock, do not immerse the
power cord, power plug or
appliance in water or any
other liquid, unless it is
recommended in the cleaning
instructions.
• The appliance is not
intended for use by persons
(including children) with
reduced physical, sensory
or mental capabilities, or
lack of experience and
knowledge, unless they have
been given supervision or
instruction concerning use
of the appliance, by a person
responsible for their safety.
• Children should be supervised
to ensure that they do not play
with the appliance.
• It is recommended to inspect
the appliance regularly. Do not
use the appliance if the power
supply cord, plug, connector or
appliance becomes damaged
in anyway.
• Return the entire appliance to
the nearest authorised Breville
Service Centre for examination
and/or repair.
• Any maintenance other than
cleaning should be performed
at an authorised Breville
Service Centre.
• This appliance is for household
use only.
• Do not use this appliance for
other than its intended use.
Do not use in moving vehicles
or boats. Do not use outdoors.
Misuse may cause injury.

5
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection
when using electrical
appliances. It is advisable that
a safety switch with a rated
residual operating current
not exceeding 30mA be
installed in the electrical circuit
supplying the appliance.
• See your electrician for
professional advice.
• During electrical storms,
the appliance should be
disconnected from the power
source at the wall socket to
prevent any electrical surges
that may arise during the storm
and which may inadvertently
cause damage to the appliance
and its electronic componentry.
• Always turn the appliance to
the OFF position, switch off at
the power outlet and unplug
at the power outlet when the
appliance is not in use.
• Before cleaning, always turn the
appliance to the OFF position,
switch off at the power outlet,
unplug at the power outlet
and remove the power cord, if
detachable, from the appliance
and allow all parts to cool.
• Do not place this appliance on
or near a heat source, such as
hot plate, oven or heaters.
• Position the appliance at a
minimum distance of 20cm
away from walls, curtains and
other heat or steam sensitive
materials and provide adequate
space above and on all sides for
air circulation.
WARNING
Do not immerse the appliance,
power cord or plug in water or
any other liquid.
WARNING
Fully unwind the power cord
from the cord storage facility
before use.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS

6
Components
A. 2000W cooking elements
B. ‘Power’ & ‘Ready’ indicator lights
C. PFOA-free non-stick coating for quick and
easy cleaning
D. Locking storage clip
E. Temperature adjust slider
F. Cool-touch handle
Not Shown
• Cord storage integrated into base
• Non-slip feet for stability.
D
E
F
B
C
A

7
Functions
BEFORE FIRST USE
Remove and safely discard any promotional
labels and wipe the cooking plates with a damp
cloth, then dry thoroughly. Season the plates
before use as per the instructions in the Care,
Cleaning & Storage section of this book.
OPERATING YOUR SANDWICH PRESS
1. Slide the handle locking clip on the
sandwich press from locked to unlock and
insert the power plug into a 230/240V
power outlet and turn the power on.
2. The ‘POWER’ light will illuminate red and
start pre-heating. While pre-heating, prepare
the sandwiches by buttering the bread and
preparing the filling.
3. Once the sandwich press has finished pre-
heating, the ‘READY’ light will illuminate
green and is ready to use.
4. For a sandwich, place the buttered bread
on the bottom heating plate with the butter
side down. Place the filling onto the bread,
then cover with another slice of bread, butter
side up. The sandwich press can fit two
sandwiches to be toasted at one time.
NOTE
For Pitas or wraps, add the filling and fold the
flaps together before placing in the
sandwich press.
5. Carefully close the lid, then set your required
heat level by using the temperature adjust
slider. Slide to select heat level between low
to high heat.
6. When the sandwich is cooked, remove using
a plastic heat resistant or wooden spatula.
Never use metal tongs or a knife as these can
cause damage to the non-stick coating.
7. To maintain heat if cooking in batches, keep
the lid closed until you are ready to toast the
next sandwich.
NOTE
The green 'READY' light will continue to cycle
on and off to indicate the sandwich press is
maintaining the correct temperature.
NOTE
Do not use metal utensils as they will scratch
the non-stick cooking surface.
NOTE
When using the sandwich press for the first
time you may notice a fine smoke haze.
This is caused by the initial heating of some of
the components. There is no need for concern.
WARNING
Steam will be ejected from between the
cooking plates when the lid is closed. Be
careful not to make contact with the steam as it
may cause burns.
WARNING
The temperature of accessible surfaces may be
high when the sandwich press is operating.

8
Hints & Tips
BREAD
The sandwich maker is designed for super and
regular sized bread. Most types of bread can be
used; white, wholemeal, wholegrain, raisin loaf
and so on. When using raisin bread, brioche or
other sweet breads which contain high sugar
content be aware that they may brown faster.
Pitas and wraps are also perfect for toasting.
FILLINGS
Be careful when biting into sandwiches
containing fillings such as cheese and tomato
or jam as they retain heat and can burn if eaten
too quickly. If using fruit filling, use canned
or pre-cooked fruit as fresh fruit may give off
excessive juices when heated. One quarter cup
of filling for each sandwich is sufficient. Do not
overfill your sandwiches.
BUTTER OR MARGARINE
For better results, we recommend to butter the
outside of the bread i.e. place filling between
the unbuttered sides of bread. If you are on a
low fat diet or kilojoule counting, the outside
of the bread may be left unbuttered, noting
you may get a lighter toasting result. For extra
flavour use herb or garlic butter for spreading
on bread.
REHEATING
If the sandwich is not being eaten immediately,
place it on a paper napkin to absorb
condensation. To keep for longer, place on a
rack in an oven-proof dish to keep warm in a
low oven, about 100°C. The sandwich should
keep hot for up to 20 minutes this way, but will
then begin to dry out.

9
Care, Cleaning
& Storage
Before cleaning, ensure the power is
switched off and then remove the power plug
from the power outlet.
Allow your sandwich press to mostly cool
before cleaning however, the sandwich press is
easier to clean when still slightly warm.
Always clean your sandwich press after each
use to prevent a build-up of baked-on foods.
Wipe cooking plates with a soft, damp cloth to
remove food residue.
WARNING
Do not immerse any part of the Breville
Sandwich press or the power cord in water or
any other liquid.
PFOA-FREE NON-STICK
COATING
Cooking on a non-stick surface minimises the
need for oil as food does not stick and cleaning
is easier. Any discolouration that may occur
will only detract from the appearance of the
sandwich press and will not affect the cooking
performance. When cleaning the non-stick
coating, do not use metal (or other abrasive)
scourers. Wash with warm soapy water and dry
thoroughly. Remove stubborn residue using a
damp cloth.
SEASON THE PLATES
Season the plates occasionally to prevent
sticking and to make cleaning easier. To
season, brush the cooking plates with a little
vegetable oil and rub off the excess with
absorbent paper. Do this after preheating
the unit.
NOTE
The cooking plates and hinges are coated
with a non-stick surface; do not use abrasive
cleansers or scourers.
STORAGE
To store your sandwich press:
1. Ensure the power is off and then unplug
power cord from the power outlet.
2. Allow the sandwich press to cool and clean
as per instructions. Close the lid and slide
the locking clip from unlocked to locked so
the lid will not open.
3. Wrap the power cord in the storage area on
the base of the sandwich press.
4. Store on a flat, dry level surface. Do not
place anything on top of the sandwich press
or the cooking plates. The sandwich press
can be stored on its side for space saving.
WARNING
Allow the unit to cool down before attempting
to move the unit.

10
Notes