Brink Renovent Sky 300 User manual

Renovent Sky 300 (Plus)
WWW.BRINKAIRFORLIFE.NL
INSTALLATION INSTRUCTIONS

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
STORE NEAR THE APPLIANCE
Renovent Sky 300 (Plus)
GB

page.
1
1.1
1.2
Delivery......................................................................................................................................................................
Scope of delivery........................................................................................................................................................
Accessories Renovent Sky 300..................................................................................................................................
1
1
2
2 Application................................................................................................................................................................ 4
3
3.1
3.2
3.3
3.4
Version.......................................................................................................................................................................
Technical information..................................................................................................................................................
Connections and dimensions .....................................................................................................................................
Fan graph ...................................................................................................................................................................
Exploded view appliance............................................................................................................................................
5
5
6
6
7
4
4.1
4.2
4.3
4.4
Operation...................................................................................................................................................................
Description..................................................................................................................................................................
Bypass conditions.......................................................................................................................................................
Frost safety.................................................................................................................................................................
Renovent Sky Plus uitvoering.....................................................................................................................................
8
8
8
8
8
5
5.1
5.2
5.2.1
5.2.2
5.3
5.4
5.4.1
5.4.2
Installation.................................................................................................................................................................
Installation general .....................................................................................................................................................
Placing the appliance .................................................................................................................................................
Placing the appliance for ceiling mounting .................................................................................................................
Placing the appliance for wall mounting .....................................................................................................................
Connecting the condensate discharge ..........................................................................................................................
Electric connections....................................................................................................................................................
Connection of the power plug.....................................................................................................................................
Control unit connection...............................................................................................................................................
9
9
9
10
11
12
15
15
15
6
6.1
6.2
6.3
6.4
6.5
6.5.1
6.5.2
6.5.3
6.5.4
Display ......................................................................................................................................................................
Switching the appliance on and off.............................................................................................................................
General explanation control unit.................................................................................................................................
View on Display..........................................................................................................................................................
User information menu ...............................................................................................................................................
Main menu..................................................................................................................................................................
Service menu..............................................................................................................................................................
Setting menu control unit............................................................................................................................................
Setting menu appliance..............................................................................................................................................
Information menu installer ..........................................................................................................................................
16
16
16
17
18
18
19
20
21
21
7
7.1
7.2
Fault...........................................................................................................................................................................
Trouble shooting.........................................................................................................................................................
Display codes .............................................................................................................................................................
22
22
23
8
8.1
8.2
Maintenance..............................................................................................................................................................
Maintenance user.......................................................................................................................................................
Maintenance installer..................................................................................................................................................
24
24
26
9 Elektric diagram........................................................................................................................................................ 30
10
10.1
10.2
10.3
10.4
10.5
10.6
10.7
10.8
10.9
Elektrische aansluitingen acc.................................................................................................................................
Connections connectors.............................................................................................................................................
Wireless remote control..............................................................................................................................................
Connection RH (humidity)-sensor ................................................................................................................................
Coupling several appliances.......................................................................................................................................
Connection preheater.................................................................................................................................................
Connection postheater or extra preheater..................................................................................................................
Connection geo heat exchanger.................................................................................................................................
Connecting external switch contact............................................................................................................................
Connection to 0-10 V input.........................................................................................................................................
31
31
31
32
32
33
33
34
35
35
11
11.1
11.2
Service.......................................................................................................................................................................
Exploded view ............................................................................................................................................................
Service articles ...........................................................................................................................................................
36
36
36
12 Setting values........................................................................................................................................................... 38
13 ERP-values.................................................................................................................................................................
Declaration of conformity............................................................................................................................................
41
42
Renovent Sky 300
Table of contents

1.1 Scope of delivery
Before starting installation of the heat recovery unit, check that it has been supplied complete and undamaged.
The scope of delivery of the heat recovery unit Renovent Sky 300 includes the following components:
1: Heat recovery appliance
2: Wall mounting bracket kit; - 2x suspension strips
3: Duct connecting kit; - 4x collars Ø150/160 mm
4: Documentation set; - 1x installation instructions
5: Connecting kit; - Mounting material collars, including 16 ¿xation screws
- Connectors : 2-pole screw connector (eBus) and 9-pole screw connector
(only for Plus version)
6: Controlunit with operating manual
Renovent Sky 300 1
Chapter 1 Delivery
1
3
5
4
2
6

Electric postheater 310671
Electric (extra) preheater 310681
Splitter RJ12 510472
CO2sensor E-Bus surface-mounted 532126
Transmitter wireless remote control 2 positions (with. battery) 531785
Transmitter wireless remote control 4 positions (with. battery) 531786
RH (humidity)-sensor 310657
Filterset 1 x F7 ¿lter (1 pcs) 532001
Filterset 1x G4 & 1x F7 (2 pcs) 532002
2 Renovent Sky 300
1.2 Accessories Renovent Sky 300
Chapter 1 Delivery

Receiver wireless remote control (for battery version) 531787
Kit wireless remote control 2 positions (1 transmitter & 1 receiver) 531788
Kit wireless remote control 4 positions (1 transmitter & 1 receiver) 531789
4-way switch with ¿lter indication; Àush mounted; modular connection. 540262
Servicetool 531961
Enthalpie heat exchanger 532060
Renovent Sky 300 3
Chapter 1 Delivery

4 Renovent Sky 300
The Brink Renovent Sky 300 is a ventilation unit with heat re-
covery with an ef¿ciency of 95, a maximum ventilation capac-
ity of 300 m
3
/h and low-energy fans.
Features Renovent Sky:
steplessly adMustable air Àow rates through a control unit
(supplied with appliance).
¿lter indication on the control unit / multiple switch.
a completely new intelligent frost protection system which
ensures that also at low outdoor temperatures the appli-
ance’s performance remains optimal and that, if necessary,
it activates the optional preheater.
low sound level
comes as standard with automatic bypass valve
constant Àow control
low energy consumption
high ef¿ciency
Renovent Sky 300 is available in two types:
 ³5HQRYHQW6N\´
 ³5HQRYHQW6N\3OXV´
Compared to the Renovent Sky 300, the Renovent Sky 300
Plus has a more extensive control board which increases the
connection options.
These installation instruction describe both the standard Reno-
vent Sky 300 and the Renovent Sky 300 Plus.
With the aid of the supplied mounting brackets, the Renovent
Sky 300 (Plus) can be mounted either on the wall or on the
ceiling. For the correct position of the connection ducts and
dimensions see §3.2.
When ordering an appliance always state the correct type;
subsequent conversion to a different version is highly labour-
intensive.
The Renovent Sky 300 comes ready to plug in with a 230 V
mains plug.
The appliance comes as standard with a control unit, but con-
nection of a simple 4-way switch is possible as well.
If a 4-way switch is installed instead of a control unit, the
settings of the appliance can only be changed with a lap-
top!
Connecting a combination of control unit and multiple switch is
another option.
Chapter 2 Application

Sound power Sky 300
Ventilation capacity [m
3
/h] 100 150 225 300
Sound power
level Lw (A)
Static pressure [Pa] 17 40 38 80 84 100 160 150 178
Housing emission [dB(A)] 29 30 37 40 46 46 47 53 53
Duct “from dwelling” [dB(A)] 32 32 41 43 49 49 50 55 55
Duct “to dwelling” [dB(A)] 43 44 51 53 60 61 62 69 68
In practice, the value may deviate 1 dB(A) as a result of measuring tolerances.
Renovent Sky 300 5
 7HFKQLVFKHVSHFL¿FDWLRQV
Renovent Sky 300
Supply voltage [V/Hz] 230/50
Protection degree IP30
Dimensions (w x d x h) [mm] 1185 x 644 x 310
Duct diameter [mm] Ø150 / Ø160
External diameter condensate discharge [“] 3/4
Weight [kg] 37
Filter class G4
Fan setting (factory setting) -control unit
Max.
4-way switch 123
Ventilation capacity [m
3
/h] 50 100 150 225 300
Permissible resistance ducts system [Pa] 3 - 6 11 - 26 25 - 58 56 - 129 100 - 230
Rated power (excl. optionel preheater) [W] 8,7 - 9,1 14,9 - 16,3 25,7 - 31,7 57,8 - 77,8 116,1 - 162,9
Rated current (excl. optionel preheater) [A] 0,10 0,15 - 0,17 0,25 - 0,29 0,50 - 0,66 0,95 - 1,34
Rated power (incl. optionel preheater) [W] 6
Cos ij0,39 0,42 0,45 - 0,47 0,50 - 0,51 0,53
Chapter 3 Version

3.2 Connections and dimensions
1 To dwelling
2 To atmosphere
3 From dwelling
4 From atmosphere
5 Electric connections
6 Connection condensate discharge
3.3 Fan graph
6 Renovent Sky 300
Chapter 3 Version
d
f
gh
c
e
0
25
50
75
100
125
150
175
200
225
250
275
300
325
350
375
400
25 50 75 100 125 150 175 200 225 250 275 300 325
04
8
7
16
14
13
27
25
23
39
31
29
49
41
36
81
66
58
>3D@
[m3/h]
Note: The value stated
in the circle is the ca-
pacity per fan (in Watt)

3.4 Exploded view
Renovent Sky 300 7
Chapter 3 Version
1 Extract air ¿lter
2 Indoor temperature sensor
3 Heat exchanger
4 Condensate bin
5 Extract fan
6Locking screw front panel
(mounted in front panel)
7 Condensate discharge
8 Supply air ¿lter
9 Outdoor temperature sensor
10 Bypass
11 Control board
12 Connector X14
13 Supply fan
14 Sleeve cable 230 V. postheater or extra
preheater
15 9-pole connector (only for Plus version)
16 Service connector
17 Connection 230V preheater
18 Modular connector multiple switch
19 Connector eBus
20 Mains cable 230 V.
21 Fall protection front panel
2
5
7
9
11
12
13
15
16
17
18
14
19
20
1
3
4
8
10
6
21

4.1 Description
4.3 Frost protection
 5HQRYHQW6N\3OXVYHUVLRQ
The appliance comes plug and play and operates fully auto-
matically. The extracted indoor air heats up the fresh, clean
outdoor air. That saves energy and fresh air is sent to the re-
quired rooms.
The control system has four ventilation modes.
The air Àow rate can be adMusted per ventilation mode. The
constant volume control system ensures that the air Àow rate
of the supply and extract fans is realised independent of the
duct pressure.
The standard bypass valve makes it possible to supply fresh
outside air that is not heated by the heat exchanger. Particular-
ly during summer nights it is desirable to supply cooler outside
air. Then the hot air in the dwelling is replaced by cooler outside
air in so far as possible.
The bypass valve opens and closes automatically when a num-
ber of conditions are satis¿ed (refer to the table below for by-
pass conditions).
The operation of the bypass valve can be adMusted in step num-
ber 5, step number 6 and step number 7 in the settings menu
(see chapter 12).
To prevent freezing of the heat exchanger at extremely low
outdoor temperatures, the Renovent Sky features intelligent
frost control. Temperature sensors measure the temperatures
across the heat exchanger and, if necessary, the preheater is
switched on. That guarantees a proper ventilation balance,
also at very low outdoor temperatures. If, with switched on
preheater(s), the exchanger temperature still starts to drop be-
low zero, stepless unbalance is created in the appliance. The
user information menu shows when the Renovent Sky frost
control system is activated (see § 6.4).
The Renovent Sky is also available as Plus version. This ver-
sion is equipped with a different control board with 2 additional
connectors (X14 & X15) with more connection options for vari-
ous applications.
Only the Plus is equipped with a 9-pole connector (connected
to X15 on control board) that is accessible from the outside of
the appliance.
If a postheater or extra preheater is connected to connector
X14 (accessible after opening the front panel ) the installer
must feed the connected 230 Volt cable to outside the appli-
ance through a strain reliever. For this strain reliever (not sup-
plied with the appliance) a plug must be removed from the posi-
tion where this strain relieve must be placed.
See §9 for more information on the connection possibilities of
connectors X14 and X15.
8 Renovent Sky 300
4.2 Bypass conditions
Chapter 4 Operation
Hole for gland to be mounted by installer (for sleeve
cable postheater/ extra preheater).
Bypass
valve
open
- The outdoor temperature is higher than 10°C and
- the outdoor temperature is lower than the indoor temperature in the dwelling and
- the temperature in the dwelling is higher than the temperature set at step no. 5 in the settings menu
(set a standard at 22°C).
Bypass
valve
closed
- The outdoor temperature is lower than 10°C or
- the outdoor temperature is higher than de indoor temperature in the dwelling or
- the temperature from the dwelling is lower than the temperature set at step no. 5 in the settings menu minus the
set temperature by the hysteresis (step no. 6), this temperature is factory 20 °C (22,0 °C minus 2,0 °C)..
9-pole
connector

5.1 Installation general
Installation must take place under:
4uality requirements ventilation systems dwellings.

4uality requirements balanced ventilation in dwellings.
The regulations for ventilation of dwellings and residential
buildings.
The safety regulations for low-voltage installations.
The regulations for connection to interior sewers in dwell-
ings and residential buildings.
Any additional regulations of the local utilities.
The installation instructions for the Renovent Sky 300
Renovent Sky 300 9
Chapter 5 Installation
 3ODFLQJWKHDSSOLDQFH
The Renovent Sky 300 can directly be mounted to the wall or ceil-
ing using the mounting brackets supplied for that purpose.
Because of the appliance’s weight, mounting the ap-
pliance must always be done by two people!
The Renovent Sky can directly be mounted to the wall/ ceiling us-
ing the suspension brackets supplied for that purpose. For a vibra-
tion-free result the appliance must be mounted to a solid wall with
a minimum mass of 200 kg/m2. A gypsum block or metal stud wall
does not suf¿ceAdditional measures such as double panelling
or extra studs are required in that case. In addition, the following
aspects must be taken into account.
The appliance must be placed level; both lengthwise and lat-
erally.
The installation room must be such that a good condensate
discharge with air trap and pitch for condensate can be made
.
We recommend not to install the heat recovery unit in spaces
with an average high RH (for instance bathroom). That will
prevent condensation on the outside of the heat recovery
unit..
Make sure that under no condition the condensate
discharge is installed at a pitch towards the appli-
ance!
The appliance is only suitable for ceiling or wall
PRXQWLQJ 1HYHU PRXQW WKH DSSOLDQFH ÀDW RQ WKH
ÀRRUEHFDXVHRIWKHSRVLWLRQRIWKHFRQGHQVDWHGLV-
charge bin!
The installation room must be frost-free.
When mounting Àexible ducts, bear in mind that it must be
possible to replace them in due course.
Make sure there is suf¿cient free space at the appliance to
allow cleaning of the ¿lters and maintaining the appliance. It
must be possible to swing the door open.
Avoid the use of petroleum-based adhesives in air plant sys-
tems.
Dwellings with construction moisture must be ventilated natu-
rally during a certain period
Ceiling mounting:
At least 70 cm at the underside of the appliance and a free
headroom of 1.8 m; if 70 cm free space is not available, for
instance when mounting on top of a suspended ceiling, there
must be suf¿cient room to partly open and remove the front
panel.
The front panel can be detached after removing a lock
screw at the hinge!
Make sure the ¿lters can always freely be removed, so there
is no frame or other obstacle at the level of the ¿lters
Wall mounting :
Make sure there is a free space of at least 70 cm at the front
of the appliance and a free headroom of 1.8 m.
Make sure there is at least 20 cm free space at the appliance
side where the electric connections are located, so connec-
tors and sleeves remain accessible.

10 Renovent Sky 300
Chapter 5 Installation
 3ODFLQJWKHDSSOLDQFHIRUFHLOLQJPRXQWLQJ
Condensate discharge
Appliance disconnecting from mounting
bracket
650 mm
490 mm
200mm
min.
50mm
min.
25mm min.
25mm
1
o
p
n
X
Y
Z
Click!
n
o
3
2
4
6
5
4x

Renovent Sky 300 11
Chapter 5 Installation
3ODFLQJWKHDSSOLDQFHIRUZDOOPRXQWLQJ
Appliance disconnecting from mounting
bracket
Condensate discharge
4x
o
p
n
1
2
Click!
3
4
5
6
n
o
650 mm
490 mm
min.
25mm
200mm
min.
50mm
min.
25mm

12 Renovent Sky 300
5.3 Connecting the condensate discharge
The Renovent Sky must always be ¿tted with a condensate dis-
charge.
The condensate must be discharged through a drainpipe
The condensate discharge connection with 3/4” mail thread (not
supplied with the appliance) must be screwed into the appliance’s
condensate bin by the installer.
Important:
Always install a detachable coupler in the condensate
discharge line as closely as possible to the appliance,
otherwise the condensate bin cannot be removed
from the appliance for service purposes!
The condensate discharge line can be mounted to it, preferably
glued, if necessary using a square bend. The installer can glue the
condensate discharge to the appliance in the desired position. The
drain must discharge under the water level in the U-trap. Use a
condensate discharge line with a diameter of 32 mm.
3DUWLFXODUO\IRUFHLOLQJPRXQWLQJPDNHVXUHWKHFRQGHQVDWH
discharge is below the level of the condensate bin in the
Renovent Sky!
Before connecting the condensate discharge to the appliance,
pour water into the U-trap to create an air trap.
Chapter 5 Installation
Detachable coupler
Detachable coupler
Max 10 Nm
3/4”

Renovent Sky 300 13
B
A
A
²
²
²
²
²
²
X
A
²
²
12
34
Chapter 5 Installation
A t60 mm
B tA

14 Renovent Sky 300
Chapter 5 Installation
A
B
A
²
²
²
²
²
²
X
A
²
²
1
2
3
4
A t60 mm
B tA

Renovent Sky 300 15
Chapter 5 Installation
5.4 Electric connections
5.4.1 Connecting the power plug
The appliance comes ready to plug in with a 230 V mains plug
Make allowance for the 1000 W preheater; if in addition
also a postheater or extra preheater is installed, the rated
power increases to 2000 W.
Warning
The fans and control board carry a high voltage. Al-
ways take the voltage from the appliance by pulling
the power plug when working on the appliance.
The appliance can be connected to an easily accessible, earthed wall socket with the plug that is mounted to the appliance. The
electric installation must comply with the requirements of your power company.
nr.1 nr.2
Cables to be connected by installer
(wire diameter at least 0,34 mm
2
)
5.4.2 Control unit connection
The control unit that comes as standard with the appliance
must be connected to the eBus connector. This (detachable)
2-pole eBus connector is mounted on the outside of the appli-
ance (see also §10.1).

16 Renovent Sky 300
Chapter 6 Display
6.1 Switching the appliance on and off
Connecting

230V / 50 Hz
> ± 25 sec
Software
S1.03.03
08:00 23:00-
08:30
23.01.12Sonntag
FILTER
Sunday
6.2 General explanation control unit
c
Right-hand set-
ting knob
Air Àow rates can be changed by rotating the
‘Right-hand setting knob’. Pressing the ‘Right-
hand setting knob’ takes you to the Main Menu
(Main Menu) of the Sky appliance (§6.5).
d
Return-key
Press the Return key (2) to leave any selected
menu/ (temporary) ventilation mode and the appli-
ance will return to operating mode.
e
Key appliance
selection
With the appliance selection key you can choose to
what appliance the control unit is connected.
f
Key manual
control
After pressing the key manual control (1) the ope-
ration of the timer program “overrulled. The display
shows on the location of the actual time block the
message ‘manual’. The unit continues to operate in
this manual setting until it is canceled by pressing the
‘Return’ key (2).
g
Info-key ressing the ‘Info-key’ (L)takes you to the ‘User infor-
mation menu’ (§6.4).
h
Left-hand setting
knob The left knob at the Renovent Sky has no function.
08:00 23:00-
08:30
23.01.12Sonntag
FILTER
Warning
When working on the appliance, always take the voltage from the appliance by ¿rst switching it off through software and
subsequently pulling the power plug.
The control unit display shows what the operating mode of the
appliance is. Settings in the control unit software of the Reno-
vent Sky 300 can be called up and changed with the aid of
the operating keys. Ex factory the control module is set for the
English language. In the setting menu controlunit, §6.5.2, you
can choose a language.
2
3
1
5
6
4