Britax B-SCENE User manual

B-SCENE™ Stroller
User Guide
IMPORTANT: To ensure your child is as safe as possible, read all
instructions thoroughly before using this stroller. Store this manual for
future reference.

©2010 Britax Child Safety, Inc. All rights reserved. Printed in China. P409400_R3:09.10
This product and its components are subject to change without notice.
Warnings..2
Features..4
In.the.Box.5
Assembly..6
Operating.Instructions
Parking Brake  10
Attaching the Seat 10
Detaching the Seat 11
Folding 12
Swivel Wheels 12
Leg Rest 13
Reclining 13
Handle Angle 13
Securing.Your.Child.14
Infant.Car.seat.Mode
Attaching Britax Infant Car Seat Adapters                    16
Removing Britax Infant Car Seat Adapters                    16
Attaching a Britax Infant Car Seat                          17
Removing a Britax Infant Car Seat                          18
Accessories.19
Other.Available.Accessories .                           20
B-SCENE™.Stroller.Configurations.                      21
Care.and.Maintenance.23
Warranty.24
Table of Contents

2
Section Title
WARNING!
DEATH or SERIOUS INJURY can occur:
• Never leave child unattended.
• Avoid serious injury from falling or sliding out. Always use harness to
secure child.
• Do not use stroller for an infant younger than 6 months without an
infant car seat or bassinet.
• Do not use stroller with a child who weighs more than 55 lbs (25
kg).
•
Do not use stroller with a child taller than 44 inches (111.8 cm).
• Do not overload basket – Maximum weight in basket is 10 lbs (4.5
kg). Overloading the basket may cause the stroller to become
unstable.
• Do not overload the seat-back storage pockets. Maximum weight in
storage pockets is 1 lb (0.45 kg).
• Always make certain that the stroller is fully open and locked before
use.
• Assembly of this stroller must be performed only by an adult.
• Do not hang or place items on the stroller handle or frame except
for those approved by Britax. They may cause the stroller to become
unstable.
• Only use Britax approved child restraints or car seats with this stroller
without the use of the Infant Car Seat Adapter Frame.
• Do not allow children to climb on or play with the stroller.
• Never use stroller on stairs or escalators.
• To avoid entrapment or pinching, do not fold or unfold stroller when
child is in or near stroller.

3
Section Title
WARNING!
DEATH or SERIOUS INJURY can occur:
• Stroller is intended for walking speed only. Do not use while jogging,
skating, etc.
• Always set the parking brake when stroller is not moving.
• Only use accessories and replacement parts approved by Britax
Child Safety, Inc.
• Do not lift the stroller by the arm bar of the seat when the seat is
occupied.
•
Read and understand these instructions before using this product.
To ensure proper use, store this user guide in a convenient place
so it can be consulted often. Failure to follow all warnings and
instructions could result in serious injury or death.
• When using an infant car seat with this product, refer to the product’s
user guide for maximum weights and other instructions.
• Do not exceed the manufacturer’s maximum weight limit when using
an infant car seat with this product.

4• Actual product may vary from images.
Canopy
Chassis.
Lock
On.right.side.
of.frame
Arm.Bar
Harness
Buckle
Leg.Rest
Front.Wheel
Rear.Wheels
Rear.Wheel.
Release.Button
Frame.
Release.
Lever
Handle.
Height.
Adjuster
Seat.Locking.Latch
Chassis.Socket
Release.Lever
Under-Seat.
Storage.
Basket
Front.
Wheel.
Release
Swivel.
Lock
Features

5
Front.Wheel
Rear.Wheels
Seat
Arm.Bar
Stroller.Frame
Rain.Cover
Britax.Infant.Car.
seat.Adapters
In the Box

6
• Lift chassis lock lever and
open the frame
• Lift handle until frame locks
into upright position as
shown
• Slide mounting pin into the
housing on the frame until it
locks into place
Unfolding
Front Wheel
NOTE: Always make sure the front
and rear wheels are locked into place
and that the brake functions properly
before each use
Assembly

7
NOTE: Left and right wheels are
marked with an L or R and are from
the perspective of standing behind
the stroller
• Hold in the release button in
the center of the wheel and
slide the mounting pin into
the housing on the rear axle
Rear Wheels
• Attaching: slide the pins into
the mounts on the seat until
they lock into place
• Removing: push the release
button on the bottom of the
mounts and pull arm bar out
NOTE: Armbar or cup holders must
always be used to avoid finger
entrapment in the open connectors
Arm Bar
Assembly

8
• Press and hold the release
button in the center of the
wheel and pull away from
the wheel housing
Removing Front Wheel
Removing Rear Wheels
• To remove, pull the wheel
release lever on the
front hub until the wheel
assembly releases
Assembly

9
• Slide the bracket onto the
canopy mount until it locks
into place
Attaching the Canopy
• Line up the bracket on the
canopy stay with the canopy
mount on the frame of the
seat
• Attach the six hook and loop
fasteners to the back of the
seat
Assembly

10
Parking Brake
Attaching the Seat
• Step on the brake pedal
until the indicator window
changes color
NOTE: Red indicates the brake is
engaged and green indicates the
brake is off
• Insert the seat locking
latches into both chassis
sockets
• Push down until an audible
click is heard
NOTE: Seat attaches forward or rear
facing
Operating Instructions

11
Detaching the Seat
• Pull up on the seat to ensure
that it is locked into place
correctly
IMPORTANT: Always remove child
before detaching the seat
• Lift both release levers on
each seat locking latch at
the same time
• Lift upward
Operating Instructions

12
IMPORTANT: Always apply brake and
remove children before folding the
stroller
• Pull up both frame release
levers located just below the
stroller handle, and press
the stroller handle down
• Continue folding until the
chassis lock engages
TIP: You may need to compress the
frame to engage the chassis lock
• Slide the swivel lock on the
front wheel housing to the
left to allow wheel to swivel,
or right to lock the wheel
straight
Folding
Swivel Wheels
Operating Instructions

13
• Depress buttons on both
sides of the leg rest hinge
and hold while raising or
lowering the leg rest to the
desired position
• Lift and hold the recline
lever on the back of the seat
and hold while raising or
lowering the seat back to the
desired position
• Depress and hold the two
release buttons on the inside
of the handle assembly
while raising or lowering
the handle to the desired
position
Leg Rest
Recline
Handle Angle
Operating Instructions

14
• Release the harness by
depressing the button in the
center of the buckle while
pulling the two top tongues
away from the buckle
assembly
• Sit child in seat and unzip
the seat back to access the
harness height adjuster
TIP: You may need to loosen the
harness to adjust the harness height
• Squeeze the adjuster to
release and slide up or
down to one of the three
positions
NOTE: Adjusted harness height
should be at or above the shoulders
of the child
Securing Your Child

15
• Tighten or loosen the
harness straps by sliding the
harness adjusters
Buckle tongues separate for added
safety. To reconnect buckle tongues,
line up the two pieces and slide the
upper portion onto the track on the
lower piece
• Buckle the harness by
pressing the tongues on
the harness straps into the
buckle assembly
NOTE: Ensure the straps are
not twisted as they may become
uncomfortable for the child
Securing Your Child

16
Attaching Britax Infant
Car Seat Adapters
• Slide each of the adapters
under the infant car seat
handle and into the shell
until they click into place
NOTE: There is a left and right
adapter and orientation should be as
shown
• Pull downward on the
adapter to ensure that it is
secure
Removing Britax Infant
Car Seat Adapters
• Pull the release lever and
slide the adapters down and
out of the infant car seat
shell
Infant Car Seat Mode

17
Attaching a Britax
Infant Car Seat
• Lock the parking brake
• Align the adapters and insert
into both chassis sockets
• Push down until a click is
heard
• Pull up on the seat to ensure
that it is secure
Infant Car Seat Mode

18
Removing a Britax Infant
Car Seat
• Set the parking brake
• Lift both release levers on
each seat locking latch at
the same time
NOTE: When removing infant car seat
from stroller, take care that the car
seat does not tip and fall
• Lift upward
NOTE: Once the infant car seat
adapters are installed, they do not
need to be removed. The infant car
seat will fit into the vehicle base while
they are attached
WARNING
• The infant car seat adapters are ONLY compatible with Britax
infant car seats and ONLY models from 2009 or newer
• Attempting to fit them into another infant car seat can
damage the car seat or cause the car seat to fall
• Use the Infant Car Seat Adapter Frame (sold separately) for
infant car seats other than Britax infant car seats
Infant Car Seat Mode