Brodit 521889 User manual

15 February, 2020, www.brodit.com, © 2020 Brodit AB
Product 521889
521889 Active holder with cig-plug With cig-plug adapter. With tilt swivel. For charging, no data transmission.
The active holder charges your battery when it is in the holder. The charging device connects to the d62
automatically when you put the device in the holder.
The holder is equipped with a tilt swivel so you can easily adjust the angle for better viewing, or switch between
portrait and landscape mode. Tilts 20° and swivels 360°. Mounting plate 42x50 mm with predrilled AMPS-holes
+2x3,5 mm centered holes. Made of high grade black ABS/Acetal plastic. Made in Sweden. Attach onto ProClip
Mounting Platform.
Dimensions: 58 x 90 x 53 mm (W x H x D mm)
Weight: 144 g
Cable length (+ connector with plug 9,7 cm): 148,5 cm
This product supports Qualcomm QC 2.0 quick charge (provided the device supports Qualcomm QC 2.0 quick
charge).
EAN: 7320285218895
Item no 521889 fits:
Ascom d62 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed
screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until
the holder is firmly in place, but still can be adjusted.
4. The holder is in place.