Brodit ProClip 854689 User manual

17 February, 2014, www.brodit.com, © 2014 Brodit AB
Product 854689
854689 ProClip
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288546896
Item no 854689 fits:
Kia Rio 12-14 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin angled edge
of the enclosed gap opener into the gap between the air vent and the surrounding frame, to widen the gap. Peel
off the adhesive tape covers on the ProClip. Press the angled edge on the upper part of the ProClip upward into
the gap between the air vent and the surrounding frame.
2. Press the lower part of the ProClip upward and hook the angled edge into the gap next to the gap opener.
Press downward on the lower part of the ProClip so the angled edge goes all the way into the gap. Pull out the
gap opener.
3. This ProClip can also be placed onto the right air vent.
4. The ProClip is in place.
2(2)