Brodit Heavy Duty ProClip User manual

3 March, 2020, www.brodit.com, © 2020 Brodit AB
Product 213534
213534 Heavy Duty ProClip
Center mount, Extra strength mounting platform.
Extra strength mounting platform for installation of heavier devices. You can keep your device in a holder or
attach it directly onto the mounting platform. The placement is optimized for touch screens, PDAs, taximeter
screens and printers. You will have your device within easy reach, safe and convenient! The installation is quick
and easy and will not damage the interior. Detailed installation instructions included.
EAN: 7320282135348
Item no 213534 fits:
Skoda Fabia 15-20 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the isntructions and look at the pictures before attaching the mount.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel
and the upper section of the dashboard, to widen the gap. Carefully pull the parts of the mount apart in order to
reach maximum length. Press the angled edge on the lower right part of the mount into the gap next to the gap
opener. Move the gap opener to the left side of the mount and press it into the gap between frame surrounding
the control panel and the upper section of the dashboard. Press the angled edge on the left lower part of the
mount into the gap next to the gap opener. Pull out the gap opener.
2. Hook the angled edges on the upper parts of the mount into the air vent on top of the dashboard.
3. Press the parts of the mount together until the mount reaches minimum length and hooks into place properly.
Tighten the nut on the top of the mount so the parts are pulled together so the mount is firmly in place. Tighten
the Allen screw with the enclosed key in order to fixate the position.
4. The mount is in place.