Brodit 804741 ProClip User manual

19 April, 2012, www.brodit.com, © 2012 Brodit AB
Product 804741
804741 ProClip
Left mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288047416
Item no 804741 fits:
BMW 3-series F30 12 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Pull out the rubber sealent on the A-post slightly. Press the angled edge on the lower part of the ProClip into
the gap and hook it around the A-post.
2. Hold the enclosed gap opener so the text is facing upward/forward, toward the windscreen. Press the thin end
of the gap opener into the gap between the A-post and the windscreen to widen the gap.
3. Press the gap opener toward the windscreen to widen the gap a bit more. In the same time: press the angled
edge on the upper part of the ProClip into the gap next to the gap opener. Pull out the gap opener.
4. The ProClip is in place.
2(2)