Brodit ProClip 854676 User manual

18 March, 2015, www.brodit.com, © 2015 Brodit AB
Product 854676
854676 ProClip
Center mount, ONLY for wood grain panel.
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288546766
Item no 854676 fits:
Volvo S80 12-15 (For all countries)
Volvo V70 II 12-15 (For all countries)
Volvo XC70 12-15 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip. The pictures show an
interior without wood grain panel, but the same installation instructions applies also for models with wood grain
panel.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the
dashboard, to widen the gap. Press the grooved edge on the lower part of the ProClip into the gap next to the
gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.
2. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press
forwards on the upper part of the ProClip so the grooved edge goes into the gap next to the gap opener.
3. Press alternately forward on the left and right side of the upper part of the ProClip. Press until you hear/feel it
snaps into place. Pull out the gap opener.
4. The ProClip is in place.
2(2)