Brodit 854805 ProClip User manual

2 April, 2020, www.brodit.com, © 2020 Brodit AB
Product 854805
854805 ProClip
Angled mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288548050
Item no 854805 fits:
Audi A3 13-19 (For Europe)
Audi S3 13-19 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Press the curved edge on the upper part of the ProClip into the gap between the trim and
the dashboard.
2. Flip the ProClip downward/forward so the curved upper edge hooks behind the trim. Adjust the ProClip position
sideways so the grooved left edge is placed in front of the gap between the climate control panel and the
surrounding frame.
3. Press the grooved edge on the left part of the ProClip into the gap beween the climate control panel and the
surrounding frame. Press until you hear/feel it snaps into place.
4. The ProClip is in place.