Brodit 711029 User manual

26 July, 2020, www.brodit.com, © 2020 Brodit AB
Product 711029
711029 Passive holder with tilt swivel For device with Powerbank BTRY-TC2X-PRPK1-01.
Keep your device in a Brodit holder, and you will always have it within easy sight and reach! Customized holder
with a perfect, firm fit for device with Powerbank BTRY-TC2X-PRPK1-01.
The holder is equipped with a tilt swivel so you can easily adjust the angle of your device for better viewing. Tilts
20° and swivels 360°. Made of high grade ABS/Acetal plastic. AMPS holes. Color: black. Made in Sweden.
Attach onto a ProClip Mounting Platform or a Pedestal Mount.
EAN: 7320287110296
Item no 711029 fits:
Zebra TC20 (For all countries)
Zebra TC25 (For all countries)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed
screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel and screw it into place.
Tighten the screw so the holder is firmly in place, but still can be adjusted.
4. The holder is in place.