Brodit ProClip 855007 User manual

29 January, 2015, www.brodit.com, © 2015 Brodit AB
Product 855007
855007 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288550077
Item no 855007 fits:
BMW i3 14-15 (For all countries)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read the instructions and look at the pictures before installing the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel of the adhesive tape
cover on the ProClip. Press the curved edge on the lower part of the ProClip into the gap in the panel underneath
the dashboard overhang.
2. Push the front part of the ProClip upward.
3. Place your index fingers behind each side of the ProClip. Pull the ProClip towards you and then hook the
angled edge over the air vent edge.
4. The ProClip is in place.
2(2)