Brodit ProClip 853435 User manual

25 February, 2014, www.brodit.com, © 2014 Brodit AB
Product 853435
853435 ProClip
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288534350
Item no 853435 fits:
Volkswagen Caddy 04-14 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the gap opener into the gap between the frame surrounding the control panel and the
dashboard, to widen the gap. Peel off the cover of the adhesive tape on the ProClip.
2. Press the curved edge on the right end of the ProClip into the gap above the gap opener. Flip the left side of
the ProClip towards the dashboard so the curved edge on the right part hooks behind the frame surrounding the
control panel. Pull out the gap opener.
3. Press the gap opener into the gap in the frame surrounding the instrument panel. Hook the angled edge on the
left part of the ProClip into the gap below the gap opener. Press the angled edge all the way into the gap. Pull out
the gap opener.
4. The ProClip is in place.
2(2)