Brodit ProClip 852224 User manual

1 March, 2020, www.brodit.com, © 2020 Brodit AB
Product 852224
852224 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288522241
Item no 852224 fits:
Fiat Brava 95-02 (For Europe)
Fiat Bravo 96-07 (For Europe)
Fiat Marea 97-07 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Attention! Read all instructions before attaching the ProClip.
Clean the surface by the lower part of the air vent closest to the steering wheel. Peel off the cover of the adhesive
tape on the ProClip.
1. Press the upper part of the ProClip into the gap between the radio and the surrounding frame.
2. Adjust the air vent downwards.
3. Press the upper and the lower part of the ProClip together slightly. Press the lower. Press the lower part of the
ProClip, with adhesive tape, under the air vent into the air vent opening. Press down on the lower part so the
adhesive tape attaches.
4. The ProClip in place.