Brodit ProClip 853353 User manual

18 March, 2015, www.brodit.com, © 2015 Brodit AB
Product 853353
853353 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle's dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288533537
Item no 853353 fits:
Ford C-Max 04-10 (For Europe)
Ford Kuga 08-12 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Attention! Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the stereo and the
frame surrounding the air vent, to widen the gap. Peel off the adhesive tape cover on the ProClip.
2. Press the lower part of the ProClip, with adhesive tape, into the gap next to the gap opener. Pull out the gap
opener.
3. Press the gap opener into the gap between the frame surrounding the air vent and the dashboard. Press the
grooved edge on the upper part of the ProClip into the gap next to the gap opener. Pull out the gap opener.
4. The ProClip is in place.
2(2)