Brodit ProClip 854809 User manual

19 March, 2015, www.brodit.com, © 2015 Brodit AB
Product 854809
854809 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288548098
Item no 854809 fits:
Hyundai i30 08-12 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on the ProClip. Place the angled edge on the right part of the ProClip into the gap between the air vent and
the surrounding frame. Press the right edge into the gap. Pull the ProClip toward you so the gap is widened, in
the same time press the angled edge all the way into the gap.
2. Press the grooved edge on the left part of the ProClip into the gap between the frame surrounding the air vent
and the dashboard.
3. Press forward on the left part of the ProClip so you hear/feel it snaps into place.
4. The ProClip is in place.
2(2)