Brodit ProClip 854271 User manual

24 February, 2014, www.brodit.com, © 2014 Brodit AB
Product 854271
854271 ProClip
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288542713
Item no 854271 fits:
Seat Ibiza 09-14 (For Europe)
1(2)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Press the thin end of the
enclosed gap opener into the gap between the frame surrounding the stereo and the dashboard, to widen the
gap. Peel off the adhesive tape cover on the ProClip. Press the curved edge on the lower part of the ProClip into
the gap next to the gap opener.
2. Flip/Press the ProClip foward so the curved lower edge hooks behind the frame surrounding the stereo. Pull
out the gap opener. Press the gap opener into the gap between the upper and the lower section of the
dashboard.
3. Hook the angled edge on the upper part of the ProClip into the gap next to the gap opener. Press down on top
of the ProClip so the angled edge goes all the way into the gap. Pull out the gap opener.
4. The ProClip is in place.
2(2)