Brodit ProClip User manual

20 February, 2020, www.brodit.com, © 2020 Brodit AB
Product 854291
854291 ProClip
Center mount
The ProClip is a mounting bracket for the vehicle’s dashboard. Onto the ProClip you can install e.g. a holder for
your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The ProClip is
car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required
and it will not damage the interior of the vehicle. Made in black ABS plastic. Comes with detailed instructions.
EAN: 7320288542911
Item no 854291 fits:
Scion iQ 12-18 (For USA)
Toyota iQ 09-19 (For Europe)

1. 2.
INSTALLATION INSTRUCTIONS
4.3.
Please read all of the instructions and look at the pictures before attaching the ProClip.
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
covers on the ProClip. Place the lower part of the ProClip in the lower part of the air vent so the edge lies against
the air vent frame.
2. Press the upper and lower part of the ProClip together so the ProClip flexes and press the upper edge forward
so it goes in under the upper part of the air vent.
3. Release the pressure so the ProClip locks into place and the adhesive tapes attach.
4. The ProClip is in place.