brondell LumaWarm User manual

LumaWarm Top Mount Installation
Page 1
Standard Installation
Bolt holes accessible above
and below porcelain
Top Mount Installation
Bolt holes only accessible
through top-side access
Some toilet fixtures have top-side access only. If you cannot access
the bolt holes and screws from underneath your toilet fixture, you will
need to use the LumaWarm Top Mount Mounting Hardware.
Kit Includes: 2 mounting blocks, 2 Phillips screws
(Visit brondell.com or call us at 888-542-3355 to purchase)
Insert the Phillips screws through
the holes in the mounting blocks
as shown.
You may also use the screws
from your original toilet seat.
Use a Phillips screwdriver to fasten the screws
into your toilet fixture bolt holes until snug. Make
sure the mounting blocks are positioned vertically.

LumaWarm Top Mount Installation cont’d.
Page 2
Slide the LumaWarm seat onto the
mounting blocks, being careful to line up
the LumaWarm’s mounting track with the
mounting blocks.
Moisten the three pads underneath the
LumaWarm seat for a more secure fit.