brondell Swash 900 User manual

Section 1Product Features page 1
Section 2Safety Precautions page
Section 3
Section 4Installation page
Section 5Operation page 14-20
21
22-23
24-25
Section 6
Section 7Maintenance page
Section 8Troubleshooting page
Section 9Warranty Information page
page
2-6
7-8
10-13
26-27

S900 and S1000 Models:
S1000 Models - Additional Features

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS

SAVE THESE INSTRUCTIONS
4

SAVE THESE INSTRUCTIONS
4
SAVE THESE INSTRUCTIONS
5

6
SAVE THESE INSTRUCTIONS
If it is necessary to use an extension cord, use only a three wire extension cord with
a threeblade grounding plug, and a three-slot receptacle that will accept the plug of
the product. Replace or repair a damaged cord immediately.
Extension cord
Receptacle
Ground GFI Outlet Bidet Seat Cord
with Grounding Pin
Grounding Pin
test
reset
GROUNDING & GFI OUTLET INSTRUCTIONS
DANGER- Improper use of the grounding plug can result ina risk of electric shock.
•
•

7
The S900 and the S1000 have the following dimensions:
The S900 and 1000: Round Size
The S900 and 1000: Elongated Size

8

9
S900 S1000

10

10
11
The T-Valve connects to the ll valve directly under your toilet tank - it does
Only connect cold (from your toilet water supply line).
not connect at the wall.

12
opening in the mounting plate and insert mounting bolts through
adjustable brackets and mounting holes. Be sure that the square
mounting bolt head is even with sides of adjustable bracket.

13

14

14
15

16
This button engages the oscillation
function on the front or rear nozzles
moves the wash wand back and forth to
during a wash cycle. Nozzle oscillation
moves the wash wand back and forth to
clean a wider area. S1000 models only
Use this button to engage 3 levels of the
warm air dryer. S1000 models only
S1000 models only S1000 models only

16
This button engages the oscillation
function on the front or rear nozzles
moves the wash wand back and forth to
during a wash cycle. Nozzle oscillation
moves the wash wand back and forth to
clean a wider area. S1000 models only
Use this button to engage 3 levels of the
warm air dryer. S1000 models only
S1000 models only S1000 models only
17

18
Move (Nozzle Oscillation) Function – S1000 Only
Warm Air Dryer – S1000 Only