Brother DCP-J125 User manual

LX6274054
CEE-ENG
Printed in China
Before you can use the machine, read this Quick Setup Guide
for the correct setup and installation.
Turn the sheet over.
Quick Setup Guide
DCP-J125
Install the ink cartridges
6d. Unpack the ink cartridge.
Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum
seal, then remove the cap a.
If all lines are clear and visible,o
press (Yes) to finish the quality
check.
If you can see missing short lines,o
press (No) and follow the steps
on the LCD.
Set the LCD contrast (if needed)
87
Check the print quality
c. Remove the green protective part a.
OK
Poor
Set the date and time
9
a. Press Menu.
b. Press aor bto choose
General Setup, and then press OK.
c. Press aor bto choose
LCD Settings, and press OK.
d. Press aor bto choose
LCD Contrast, and then press OK.
e. Press dor cto choose the contrast level,
and then press OK.
f. Press Stop/Exit.
a. Press Menu.
b. Press aor bto choose
Initial Setup, and
then press OK.
c. Press aor bto choose
Date&Time, and then
press OK.
Unpack the machine and check the components
1
1
Inbox Ink Cartridges [x4]1
Black
Yellow
Cyan
Magenta
Power Cord Installation CD-ROM
Documentation CD-ROM
Control Panel
The components of your box may differ depending on your country.
1 Approx. 65% yield of the replacement cartridge. For details, see Consumable items in the Basic
User’s Guide.
Plastic bags are used in the packaging of your machine. To avoid
danger of suffocation, please keep these bags away from babies
and children.
WARNING
3a. Pull out the paper tray. b. Lift the output paper tray cover a.
Load plain A4 paper
c. Press and slide the
paper side guides
aand paper length
guide bto fit the
paper size.
Make sure that the
triangular marks c
on the paper side
guides aand paper
length guide bline
up with the mark for
the paper size you
are using.
d. Fan the stack of paper well.
e. Gently put the paper into
the paper tray. Check that
the paper is flat in the tray.
f. Gently adjust the paper side
guides to the paper with
both hands.
Make sure the paper side
guides touch the edges of
the paper.
g. Close the output paper tray
cover and slowly push the
paper tray back into the
machine.
h. Pull out the paper support a
until it clicks, and then unfold
the paper support flap b.
IMPORTANT
DO NOT push the paper in too far.
a. Connect the power cord.
The machine must be fitted with an earthed plug.
WARNING
Connect the power cord
4
Choose your language
5a. Press aor bto choose your
language and press OK.
b. Press aor bto choose Yes
or No and press OK.
Note
If you set the wrong language,
you can change it again after
setting the date and time.
(For details see Changing LCD
language in chapter 1 in the
Advanced User’s Guide on the
documentation CD-ROM.)
e. Install each ink cartridge in the direction of the arrow on the label.
Take care to match the colour of the lever awith the cartridge
colour b.
Start Here
WARNING
WARNING indicates a
potentially hazardous
situation which, if not
avoided, could result in
death or serious injuries.
a. The LCD shows No Ink Cartridge.
b. Open the ink cartridge cover a.
a. When the preparation process has
finished, the LCD shows
Set Paper and Press Start.
Press Colour Start.
Note
Save all packing materials and the box in case for any•
reason you must ship your machine.
A USB cable is not included.•
You need to purchase a USB 2.0 cable that is no more
than 2 metres long.
a. Remove the protective tape and film covering the
machine, and also from the LCD.
b. Remove the plastic bag acontaining the ink cartridges
from on top of the paper tray.
c. Make sure you have all components.
f. Gently push the ink cartridge until it clicks. After all the ink
cartridges are installed close the ink cartridge cover.
d. To enter the last two digits of the year, press
a, b, dor cto select a number and press OK.
To save the year, press a, b, dor cto select
OK
OK
and press OK.
OK
OK
0
123
456
789
Year:2010
(e.g. Enter 10 for 2010.)
IMPORTANT
DO NOT connect the
USB cable yet.
Note
The Warning LED on the
control panel will stay on
until you have installed
the ink cartridges.
Note
Make sure you install the Inbox Ink Cartridges
included with your machine first.
e. Repeat for month/day/time in 24-hour format.
f. Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit to go back to step a.
b. Check the quality of the four colour blocks a
on the sheet.
(black/yellow/cyan/magenta)
Note
Do not throw away the green protective part.
You will need it if you transport the machine.
Note
The machine will prepare the ink tube system for printing.
This process will take approximately four minutes.
Do not turn off the machine.
a. Attach the cover of the control
panel to the machine.
Attachment of the cover of
the control panel
21
1
2
1
1
1
2
1
1
3
2
3
1

For Windows®
For Mac OS X
What is Innobella™?
Innobella™ is a range of genuine consumables offered by Brother.
The name “Innobella™” derives from the words “Innovation” and “Bella”
(meaning “Beautiful” in Italian) and is a representation of the “innovative”
technology providing you with beautiful and long lasting print results.
LX6274054
a. Insert the supplied
installation CD-ROM
into your CD-ROM drive.
Choose your language.
b. Click Install MFL-Pro Suite,
and click Yes if you accept
the license agreements.
a. Click Finish to restart your computer.
c. Follow the on-screen
instructions until this
screen appears:
d. Click Next.
e. When the Brother Support
screen appears, click Close
to finish the installation.
c. Choose the machine
from the list, and then
click OK.
a. Lift the scanner cover
until it locks securely
into the open position.
c. Carefully guide
the USB cable into
the trench and out
the back of the
machine. Connect
the cable to your
Macintosh.
a. Insert the supplied
installation CD-ROM
into your CD-ROM
drive.
b. Double-click the
Start Here OSX
icon.
IMPORTANT
The machine must be ON and•
connected to the computer.
The computer must be•
connected to the internet.
Make sure you are logged on•
with Administrator rights.
a. Open the top menu again by ejecting and then
reinserting the installation CD-ROM or by double-
clicking the start.exe program from the root folder.
b. The CD-ROM Top Menu will appear. Choose your
language and then click Additional Applications.
c. Click the button for the application you want to install.
d. Go back to the Additional Applications screen to
install more applications.
Install FaceFilter Studio Help
15
To get instructions on how to use
FaceFilter Studio, download and
install FaceFilter Studio Help.
a. Go to start/All Programs/
Reallusion/FaceFilter Studio
on your computer.
b. Click the button on
the upper right corner of
the screen, and then click
Check for updates to go
to the Reallusion update
web page.
c. Click the Download
button and choose a
folder to save the file in.
d. Close FaceFilter Studio, double-click the
downloaded file from the folder you specified,
and then follow the on-screen instructions to
install.
Note
To view FaceFilter Studio Help, go to start/
All Programs/Reallusion/ FaceFilter Studio/
FaceFilter Studio Help on your computer.
d. Lift the scanner cover to release the lock a.
Gently push the scanner cover support down
band close the scanner cover c.
13
b. Connect the USB
cable to the USB
socket marked with a
symbol. The USB
socket is inside the
machine as shown.
e. The installation will continue automatically.
The installation screens appear one after
another.
Before you install
10
Install MFL-Pro Suite
11
b. Connect the USB cable to the
USB socket marked with a
symbol. The USB socket is
inside the machine as shown.
c. Carefully guide the USB cable into the
trench and out the back of the machine.
Connect the cable to your computer.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
IMPORTANT
DO NOT cancel any of the screens.
It may take a few minutes for installation
to complete.
Finish and restart
The installation is
now complete.
Install Optional Applications supported by Reallusion, Inc
14
Before you install
10
Connect the USB cable
11
IMPORTANT
DO NOT connect the machine to a USB•
port on a keyboard or a non-powered USB
hub. Connect the machine directly to your
Macintosh.
Make sure that the cable does not restrict•
the cover from closing, or an error may
occur.
d. Lift the scanner cover
to release the lock a.
Gently push the
scanner cover support
down band close the
scanner cover c.
Install MFL-Pro Suite
12
The installation is
now complete.
a. Make sure that your computer is
ON and you are logged on with
Administrator rights.
Note
If the Brother screen does
not appear automatically,
go to My Computer
(Computer), double-click
the CD-ROM icon, and
then double-click start.exe.
Note
If an error message appears during the software•
installation, run the Installation Diagnostics
located in start/All Programs/Brother/DCP-JXXX
(where DCP-JXXX is your model name).
Depending on your security settings, a Windows•
Security or antivirus software window may appear
when using the machine or its software. Please
allow or permit the window to continue.
FaceFilter Studio is an easy-to-use
borderless photo printing application.
FaceFilter Studio also lets you edit your photo
data and add photo effects such as red eye
reduction or skin tone enhancement.
The BookScan Enhancer software
can correct your scanned book images
automatically.
The Whiteboard Enhancer software cleans
up and enhances text and images from photos
taken of your whiteboard.
Make sure your machine
is connected to the power
and your Macintosh is ON.
You must be logged on
with Administrator rights.
Note
It may take a few minutes
for installation to complete.
After the installation,
the Brother software will
search for the Brother
device.
Finish
Finish
b. In the Check for Firmware Updates
screen, choose the firmware update
setting you want and click OK.
Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver
is the most suitable driver when printing
from applications that use the XML Paper
Specification documents. Please download the
latest driver by accessing the Brother Solutions
Center at http://solutions.brother.com/
Note
Internet access is required for
the firmware update.
f. When the User’s Guides screen is
displayed, click View Manuals on the Web
if you want to download the manuals and
follow the on-screen instructions. You can
also view the manuals on the documentation
CD-ROM.
g. When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions.
h. If you do not want to set your machine as
the Default printer, uncheck Set as Default
Printer.
a. Lift the scanner cover
until it locks securely
into the open position.
Connect the USB cable
12
IMPORTANT
DO NOT connect the USB cable yet.•
For the latest drivers and information,•
visit http://solutions.brother.com/
The screen may differ depending on•
the operating system.
For Windows Vista•
®
and Windows
®
7 ,
when the User Account Control
screen appears, click Allow
or Ye s .
IMPORTANT
For the latest drivers and information•
on the Mac OS X you are using, visit
http://solutions.brother.com/
For Mac OS X 10.4.0 to 10.4.10 users,•
upgrade to Mac OS X 10.4.11 - 10.6.x.
Get inspired. Double-click the Brother CreativeCenter icon on your desktop to access
a FREE web site with many ideas and resources for personal and professional use. http://www.brother.com/creativecenter/
1
3
2
1
3
2
USB
USB