Brother DCP-L8400CDN User manual

1
2
3
4
1
2
3
Product Safety Guide
Unpack the machine and check the components
Drum Unit
(pre-installed)
Toner Cartridges
(Black, Cyan, Magenta and Yellow;
pre-installed)
Waste Toner Box
(pre-installed)
Power Cord
Quick Setup Guide
Basic User’s Guide
For MFC models
CD-ROM
Belt Unit
(pre-installed)
Read the Product Safety Guide rst, and then read this Quick Setup
Guide for the correct installation procedure.
NOTE:
The illustrations in this Quick Setup Guide are based on the •
MFC-L8650CDW.
For a network connection you will need to purchase a network•
interface cable. Please use the supplied USB cable for a USB
connection.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no
more than 2 metres long.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
1Remove the packing material from the machine
2Load paper in the paper tray
3Connect the power cord and turn on the machine
4Select your language (if needed)
Telephone Line Cord
For MFC models
USB Interface Cable
Press
1. > All Settings > Initial Setup > Local Language
Press your language.
2.
Press
3. .
Quick Setup Guide
DCP-L8400CDN / MFC-L8650CDW
The latest manuals are available at Brother Solutions Center:
http://solutions.brother.com/. Version 0
CHN-ENG

Finish
Wireless Network Connection
Finish
[Recommended]
Temporarily use a USB cable
for easy setup.
Conguration using the CD-ROM (Windows®)
Conguration without using the CD-ROM (Windows® without CD-ROM drive or Macintosh)
5
Follow the on-screen instructions until
the Connection Type screen appears.
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
Finish
Follow the on-screen
instructions to continue
the installation.
NOTE:
If connection is unsuccessful, repeat this step.
[Option]
Select if you do not have a USB cable.
Download the full driver and software package from the Brother Solutions Center.
(For Windows®) solutions.brother.com/windows
(For Macintosh) solutions.brother.com/mac
Print from your mobile devices using our free application “Brother iPrint&Scan”.
Connect the machine and wireless LAN access point/router from the machine's Touchscreen.
1.
Download “Brother iPrint&Scan" to start using your machine with mobile devices.
2. solutions.brother.com/ips
Print using your mobile device
Select the specied SSID,
and then enter the Network key.
Press . Press Setup Wizard. Press Yes to enable WLAN.
For USB Connection
For Wired Network Connection
Connect a network cable rst.
For Wireless Network Connection