Broyhill CALCOLO STONE 7272 User manual

CALCOLO STONE END TABLE
ITEM#:7272
SKU# 810530874
Need help? We are here for you! www.biglots.com/help/contact-us
CALCOLO STONE COLLECTION
ASSEMBLY INSTRUCTION

GENERAL BEST PRACTICES FOR ASSEMBLY:
WARNINGS:
Read all instructions before starting.
Clear an area for assembly and assemble on a soft surface such as
cardboard or carpet to protect finish.
Caution: Adult assembly required. Assembly will require 2 people. Assemble on soft
surfaces to prevent damage to the product finish.
DO NOT use power tools.
MAINTENANCE:
Check bolts/screws periodically and tighten if necessary.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE.
1/12

HELPFUL HINTS
DO NOT place your furniture too close to window, heaters, or vents.
DO NOT SMOKE WHEN DROWSY. Immediately remove any glowing or lit cigarette which
falls on furniture.
Clean any spills immediately using a clean, slightly dampened cloth and dabbing
the area until the spill is removed.
2/12

PARTS LIST LARGE TABLE
Top x1pc Legs x3pc
A
B
D
Base x1 pc Washer x6 pc
C
Allen Key x1pc Allen Screw x6pc
E
F
Decorative Bolt x6pc
G
3/12

STEP 1
Assembled View:
1. Secure Legs (B) to Top (A) with Washer (D) and Allen Screw (F) using Allen Key (E). Fully tighten
screws.
4/12

STEP 2
1. Align the holes of Base (C) with the holes in Legs (B) and secure in place with Washer (D) and Allen
Screw (F) using Allen Key (E).
Assembled View:
5/12

STEP 3
1. Fully tighten all Allen Screws with Allen Key so legs do not move.
Assembled View:
6/12

STEP 4
Assembled View:
1. Turn the table to the upright position. Insert Decorative Bolt (G) into the holes of Leg (B). Hand tighten
until tight. DO NOT use tools. Assembly is now complete.
7/12

PARTS SMALL TABLE
Top x1pc Legs x3pc
A
B
D
Base x1 pc Washer x6 pc
C
Allen Key x1pc Allen Screw x6pc
E
F
Decorative Bolt x6pc
G
8/12

STEP 1
Assembled View:
1.Secure Legs (B) to Top (A) with Washer (D) and Allen Screw (F) using Allen Key (E). Fully tighten
screws.
9/12

STEP 2
1.Align the holes of Base (C) with the holes in Legs (B) and secure in place with Washer (D) and Allen
Screw (F) using Allen Key (E).
Assembled View:
10/12

STEP 3
1.Fully tighten all Allen Screws with Allen Key so legs do not move. Return both tables to the upright
position. Assembly is now complete.
Assembled View:
11/12

PRINTED IN INDIA
STEP 4
Assembled View:
1. Turn the table to the upright position. Insert Decorative Bolt (G) into the holes of Leg (B). Hand tighten
until tight. DO NOT use tools. Assembly is now complete.
12/12