Broyhill H21GR018VG User manual

ASSEMBLY INSTRUCTION
ITEM#: H21GR018VG
SKU#: 810544217
Need help? We are here for you! 1 (877) 800 – 6021 • Toll Free
[email protected] • Email Address
SANDPOINTE
1PC SWIVEL GLIDER CHAIR

Use the correct bolts as indicated. Do not tighten any of the bolts until the swivel glider is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children. Children
should always be under direct adult supervision while using this product.
Chairs are for sitting purposes only. Standing on or misuse of chair may result in damage or injury. Not intended
for commercial use. Weight limit is 250 lbs (113 kg).
Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Retain these assembly instructions for future reference.
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your
swivel glider.
In order to prolong the life and beauty of your swivel glider, we recommend that it be stored in a dry and protected area
during off season periods.
PAGE 1 OF 8
Regularly check hardware and tighten if necessary
To Ensure Alignment & Easy Assembly, Secure All Bolts & Washers In Place Before Fully Tightening

PAGE 2 OF 8
2
1 1
1
1
14
3
BACK ASSEMBLY
SEAT ASSEMBLY
LEFT ARM
RIGHT ARM
SUPPORT FRAME
SEAT POST
DECORATIVE
PLASTIC COVER
BASE ASSEMBLY
SWING BAR
H21GR018VG-BG
H21GR018VG-ZG
H21GR018VG-ZSB
H21GR018VG-YSB
15 H21GR018VG-DG
16 H21GR018VG-ZJ
17 H21GR018VG-ZSG
1
4
8H21GR018VG-DZ
H21GR018VG-BG
9
10
PART
NO. MATERIAL CODE PART Q’TY
1
8
24
13
14
WASHER d6.5*D30*2.0
WASHER d8.5*D12.5*1.5
WASHER d8.5*D17*1.6
DP-d6.5-D13
DP-d6.5-D30
DP-d8.5-D17
DP-d8.5-D12.5
16
16
15
WASHER d6.5*D13*1.0
17
18
LS-M6-50
BOLT M6*45
LS-M6-45 4
JAM NUT M6*1.0
LM-M6 1019
20
21
BACK CUSHION
SEAT CUSHION
H21GR018VG-BM 1
H21GR018VG-ZM 1
PARTS LIST
500 10 20 30 40 60 70 80 90
mm 100
Ⅰ
Ⅱ
Tools
Ⅰ
Ⅲ
Ⅳ
BOLT M6*50
6
LS-M6-15
11
12
BOLT M6*35
1
LS-M6-35
BOLT M6*15
4
BOLT M8*30
8
PTLS-M8-30

PAGE 3 OF 8
STEP 1
PARTS REQUIRED: 4, 9, 10, 17, & 18
Keep the bolts loose.
STEP 2
10
17
18
18
3
99
PARTS REQUIRED: 3, 9, 10, 17, & 18
Keep the bolts loose.
x2
9
4
99
x2
10
x2
9
x2
10
x2
17
10
17
18
18
x4
18
x2
17
x4
18

PAGE 4 OF 8
STEP 3
PARTS REQUIRED: 1, 2, 14, 15, & 19
Keep the bolts loose.
x2 x4
14 15
14
1
15
2
x2
19
STEP 4
PARTS REQUIRED: 1, 3, 4, 14, 15, & 19
Keep the bolts loose.
43
1
Note:
The labels marked “L” and “R” on the arms (#3 and #4)
should coincide with Step 4 to ensure proper assembly.
19
15
3
1
14
14
15
15
15
15 19
19
x4 x8
14 15
x4
19

PAGE 5 OF 8
STEP 5
PARTS REQUIRED: 2, 3, 4,13, 15, & 19
Keep the bolts loose.
STEP 6
PARTS REQUIRED: 5, 9, 10, 17, & 18
Keep the bolts loose.
x4 x8
13 15
x4
19
13
13
15
15
15
15
19
19
43
2
10
17
18
18
x4
10
x8
18
x4
17
5
9
99
9

STEP 7
PARTS REQUIRED: 5, 6, 11, & 15
Tighten all bolts by using the supplied Hex key.
x4 x4
11 15
STEP 8
PAGE 6 OF 8
66
11
11
15
15
6
5
PARTS REQUIRED: 7 & 8
x1
7
A
A
7
7
7
8
8

STEP 9
STEP 10
PAGE 7 OF 8
PARTS REQUIRED: 6, 8, 12, & 16
x1 x1
12 16
Note:
For ease with installation, we recommend that the seat
post (#6) be slightly olied or waxed before fastening it to
the base assembly (#8).
PARTS REQUIRED: 20 & 21 Caution:
To ensure one’s safety during use of this swivel glider,
make sure that all of the bolts are completely tightened.
This chair has the ability to swivel; therefore use by
young children should be adult supervised.
Warranty
•One–year limited warranty.
•Proof of purchase (dated register receipt) is required for warranty claims.
•It remains the customer’s responsibility for freight and packing charges to and from the service center.
20
21
8
6
12 16

PAGE 8 OF 8
The store where you made your purchase does not stock parts for this item.
If you need parts, whether they are missing or damaged,
STOP!
Missing A Part? No Need To Go Back To The Store
Call us between 9:00 AM and 4:30 PM Eastern Time Monday through Friday
For further assistance, please visit us at [email protected]
Call Toll Free:
TEL: [phone]