Broyhill 810493160 User manual

ASSEMBLY INSTRUCTION
ITEM# : GBO21-305-3
SKU# : 810493160
EASTLAKE COFFEE TABLE
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [email protected], customerse[email protected]
customerservice[email protected]

Read all instructions before starting
Clear a flat covered space to being
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a stcker on the products
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
WARNINGS:
Use the correct screws as indicated. All screws should be hand tight untill the complete piece is assembled ( This will make
the assembly process much easier ). Once the piece is fully assembled, then go back and tight all screws with provided tool.
Keep all children and pets away from assembly area. Children and pets should be supervised when they are in the area of the product
construction.
MAINTENANCE
ALL WEATHER WICKER PRODUCT CARE
Before using, clean the product completely with a soft dry towel. When not in use, wipe free of any dirt or loose objects, wash with a mild
solution of soap and water, rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners. Over time screws can loosen.
Occasinally, check screws on the table, re-tighten if necessary.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to the product. Please read all instructions before assembly and use.
The table is not to be used for standing purposes and will not function as a stool or step-ladder. Use on even surfaces only.
In order to make the whole product adjust to the best, please install all the screws on the product and tighten all the screws after adjusting the
product which can stand on the floor even.
GENERAL BEST PRACTISE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:
WARNINGS:

Part No. Part Qty Image Part No. Part Qty Image
1Table Top 14Screw(φ6x15mm) 4
2Table Leg 25Screw(φ6x25mm) 8
3Support 16Washer 12
Tools
PARTS LIST
PARTS LIST:
PRODUCT FRAME MAP
1
2
2
3

STEP 1
PART REQUIRED: 1,2
Keep the screws loose.
STEP 2
PART REQUIRED: 1, 2 & 3
Keep the screws loose.
STEP 1
5
STEP 2
X8 X8
X4 X4
1
2
2
3
6
2
2
5
6
46
1
4
6

Warranty
One-year limited warrantly.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 2
Tighten all the screws.
Finished!
STEP 3