Broyhill CALVACANTE 7022 User manual

Page 1 of 6
GENERAL BEST PRACTICES FOR ASSEMBLY:
*Please read the assembly instructions prior to assembling this product.
.
*Determine you have adequate space for assembly.
*Assembly by two adults is recommended.
*Assemble on soft surfaces to prevent damage to product finish.
*Keep children away during assembly. This item contains small parts which can be
swallowed by children.
*Do not discard any of packaging until you have checked that you have all the parts
and hardware.
*Retain the assembly instructions for further reference.
*The manufacturer will not accept responsibility for unauthorized repairs or modifications
to this product.
*DO NOT use power tools.
*Remove all packaging material, make sure all parts are present before assembly.
*This product will burn if left in contact with flame source.
*Should this product become damaged, and/or components are broken or missing,
DO NOT USE.
*Insider Tip: Fabric and foam can shift slightly during shipping.
This can easily be smoothed with your fingertips, working outwards toward the corners.
*Treat upholstered surfaces with care. Clean any spills immediately using a clean, slightly
dampened cloth and dabbing the area until the spill is removed.
*DO NOT use any chemical cleaners. Hardware may loosen over time.
*Periodically check all bolts and fully tighten any that are loose.
MAINTENANCE:
WARNINGS:

Page 2 of 6
PARTS LIST
HARDWARE LIST
x 2pcs
Leg Frame
x 1pc
Middle Leg Frame
Flat Washer x 16pcs
∅5/16” x 22mm
Lock Washer x 16pcs
∅5/16” x 13mm
x 2pcs
Top Panel
Allen Bolt x 16pcs
∅5/16” x 42mm
Allen Key x 1pc
∅5mm
AB
32
C
x 2pcs
Bottom Panel
x 1pc
PU Cushion
D E
1
4
Wood Dowel x 16pcs
∅10 x 30mm
5

Page 3 of 6
STEP 1
A
C
C
D
D
B
5
A
x16
5
Assembled View:
HARDWARE NEEDED
Place all the parts onto a solid nonabrasive surface
such as carpet or a cloth to prevent damage to the product.
Insert the Wood Dowels (5) into the smaller holes of the
Top Panel (C) and the Bottom Panel (D). With assistance from
another adult, align the Wood Dowels (5) in Top Panel (C) and
Bottom Panel (D) with the holes in Leg Frame (A) and Middle
Leg Frame (B) and slide into place as shown in the diagram.

Page 4 of 6
STEP 2
A
A
B
C
C
D
D
2
1
3
4
x16
3
x1
4
x16
2
x16
1
Assembled View:
HARDWARE NEEDED
Secure Top Panel (C) and Bottom Panel (D) to Leg Frames (A)
and Middle Leg Frame (B) with Allen Bolt (1), Lock Washer (2)
and Flat Washer (3) using Allen Key (4).
Make sure the edges of Top Panel (C) and Bottom Panel (D)
are aligned with the edges of Leg Frame (A) and Middle
Leg Frame (B). Fully tighten all bolts

Page 5 of 6
STEP 3
E
C
C
Assembled View:
Adjustable
With assistance from another adult, carefully turn the assembled
base to the upright position. Place the PU Cushion (E) onto
the Top Panel (C). Secure the PU Cushion (E) by attaching the straps
to the inside edge of Top Panel (C) as shown in the diagram.
Place the assembled Ottoman in the desired location.
Use the levelers to level and stabilize the Ottoman as needed.

Page 6 of 6
PRINTED IN VIETNAM
ASSEMBLY IS COMPLETED