Broyhill BOBBINA IC 1000 User manual

BOBBINA END TABLE
ITEM# IC 1000
SKU#810530650
Need help? We are here for you! www.biglots.com/help/contact-us
BOBBINA COLLECTION
ASSEMBLY INSTRUCTION

GENERAL BEST PRACTICES FOR ASSEMBLY:
WARNINGS:
Read all instructions before starting.
Clear an area for assembly and assemble on a soft surface such as
cardboard or carpet to protect finish.
Caution: Adult assembly required. Assembly will require 2 people. Assemble on soft
surfaces to prevent damage to the product white finish.
DO NOT use power tools.
MAINTENANCE:
Check bolts/screws periodically and tighten if necessary.
WARNING: Should this product become damaged, and/or components
are broken or missing, DO NOT USE.
1/8

HELPFUL HINTS
DO NOT place your furniture too close to window, heaters, or vents.
DO NOT SMOKE WHEN DROWSY. Immediately remove any glowing or lit cigarette which
falls on furniture.
2/8
Clean any spills immediately using a clean, slightly dampened cloth and dabbing
the area until the spill is removed.

PARTS LIST
Top x1pc Base x1 pc
A
B
D
Mid post x4 pc Foot x4pc
C
3/8
Nut bolt x4pc
E
Nut bolt x4pc
F
Spanner x1pc
G

STEP 1
Assembled View:
4/8
100%
1.Align the Nut Bolt (E) with the holes on the bottom of Top (A).
Fully tighten using Spanner (G).

STEP 2
5/8
Assembled View:
1.Align the holes in the end of Mid Posts (C) with the Nut Bolts (F) in Top (A).
Turn the Mid Posts (C) in a clockwise direcon unl fully ghtened."Insert the shorter end of
Nut Bolt (H) into the holes in Legs (C) and fully ghten using Spanner (E).
100%

STEP 3
6/8
Assembled View:
100%
1.Insert the shorter end of Nut Bolt (F) into the holes in Mid Posts (C) and fully ghten using Spanner (G).

STEP 4
7/8
Assembled View:
1.Align the holes in Base (B) with the Nut Bolts in Mid Posts (C) and lower into place.

STEP 5
PRINTED IN INDIA
8/8
Assembled View:
1.Align the Nut Bolts in Mid Posts (C) with the holes in Foot (D). Turning in a clockwise direcon,
full ghten Foot (D). Place the table in the upright posion. Assembly is complete.