Broyhill Pembroke H22SK1227-1 User manual

ASSEMBLY INSTRUCTION
ITEM#: H22SK1227-1
SKU#: 810588252
PEMBROKE SWIVEL GLIDER
Need help? We are here for you! 1 (877) 800 – 6021 • Toll Free
[email protected] • Email Address

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
MAINTENANCE:
WARNINGS:
GENERAL BEST PRACTICES FOR ASSEMBLY:
Helpful hints provided along the way
Retain these assembly instructions for future reference
Wash frame and fabric parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach,
acid, or other solvents on the frame or fabric parts.
The cushions may be washed on the surface only by using mild soap and water or a commercial foaming
upholstery cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
We recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and
safety of your swivel glider.
In order to prolong the life and beauty of your swivel glider, we recommend that it be stored in a dry and
protected area during off season periods.
PAGE 1 OF 7
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the swivel glider is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Chairs are for sitting purposes only. Standing on or misuse of chair may result in damage or injury. Not intended
for commercial use. Weight limit is 250 lbs (113 kg).
To Ensure Alignment & Easy Assembly, Secure All Bolts & Washers In Place Before Fully Tightening

PAGE 2 OF 7
PARTS LIST
2
1 1
1
2
1
8
1613
12
14
15
3
PART
NO. MATERIAL CODE PART Q’TY
BACK ASSEMBLY
SEAT ASSEMBLY
ARM
WASHER d6.5*D30*2.0
SUPPORT FRAME
WASHER d8.5*D12.5*1.5
SEAT POST
DECORATIVE
PLASTIC COVER
JAM NUT M6*1.0BASE ASSEMBLY
SWING BAR
BOLT M6*15
BOLT M6*50
BACK CUSHION
BOLT M6*35
SEAT CUSHION
WASHER d8.5*D17*1.6
HRVS9156-BG
HRVS9156-ZG
HRVS9156-SB DP-d6.5-D13
DP-d6.5-D30
DP-d8.5-D17
DP-d8.5-D12.5 1616
WASHER d6.5*D13*1.0
8
PTLS-M8-30
14
BOLT M8*30
HRVS9156-DG
LM-M6 217
15 HRVS9156-ZJ
16 HRVS9156-ZSG
1
4
7HRVS9156-DZ
HRVS9156-YG
4
8
LS-M6-15
2
9
LS-M6-50
HRVS9156-BM 118
HRVS9156-ZM 119
9
11
10 LS-M6-35
500 10 20 30 40 60 70 80 90
mm 100
Ⅰ
Ⅱ
Tools
Ⅰ
Ⅲ
Ⅳ

PAGE 3 OF 7
STEP 1
PARTS REQUIRED: 3, 8, 9, 15, & 16
Keep the bolts loose.
STEP 2
9
15
16
16
3
8
8
x2
8
x2
9
x2
15
x4
16
PARTS REQUIRED: 2, 3, 10, & 13
Keep the bolts loose.
3
3
2
10
10
13
13
x4
10
x4
13

PAGE 4 OF 7
STEP 3
STEP 4
PARTS REQUIRED: 1, 2, 12, 13, & 17
Keep the bolts loose.
x2
x2
x4
12
17
13
12
17 1
2
13
13
PARTS REQUIRED: 1, 3, 10, & 13
Keep the bolts loose.
x4
10
x4
13
10
13 1
3
3

PAGE 5 OF 7
STEP 5
PARTS REQUIRED: 4, 8, 9, 15, & 16
Keep the bolts loose.
STEP 6
9
15
16
16
4
8
8
8
8
x4
9
x8
16
x4
15
PARTS REQUIRED: 4, 5, 11, & 13
Tighten all bolts by using the supplied Hex key.
4
5
x4 x4
11 13
5
11
11
13
13
Note:
The labeled arrow marks on the support frame (#4) should
coincide with Figure 5 to ensure proper assembly.
5

PAGE 6 OF 7
STEP 7
PARTS REQUIRED: 6 & 7
A
A
6
6
6
7 7
x1
6
STEP 8
PARTS REQUIRED: 5, 7, 10, & 14
Note:
For ease with installation, we recommend that the seat
post (#5) be slightly olied or waxed before fastening it to
the base assembly (#7).
x1 x1
10 14
15
5
7
10
14

STEP 9
PAGE 7 OF 7
PARTS REQUIRED: 18 & 19
Caution:
To ensure one’s safety during use of this swivel glider,
make sure that all of the bolts are completely tightened.
This chair has the ability to swivel; therefore use by
young children should be adult supervised.
Warranty
• One–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’s responsibility for freight and packing charges to and from the service center.
The store where you made your purchase does not stock parts for this item.
If you need parts, whether they are missing or damaged,
STOP!
Missing A Part? No Need To Go Back To The Store
Call us between 9:00 AM and 4:30 PM Eastern Time Monday through Friday
For further assistance, please visit us at [email protected]
Call Toll Free:
TEL: [phone]
STEP 9
18
19