Broyhill GBO23-925-2 User manual

ASSEMBLY INSTRUCTIONS
ITEM# : GBO23-925-2
SKU# : 810580336
CRESTFIELD HIGH DINING BAR TABLE
Need help? We are here for you! 1-888-733-8169 Toll Free
Or email us at [e-mail],[e-mail]
[e-mail]

Read all instructions before starting
Clear a flat covered space to begin assembly
Always best to do it with a friend
Note that hardware required is provided for every step
Pay attention to orientation
Letter of the part corresponds to a sticker on the product
Number of the hardware corresponds to its letter in the package
Helpful hints provided along the way
Retain these assembly instructions for future reference.
WARNINGS:
Use the correct bolts as indicated. All bolts should be hand tightened until the complete piece is assembled ( This will make the assembly
process much easier ). Once the piece is fully assembled, then go back and tighten all bolts with provided tool.
Regularly check hardware and tighten if necessary.
Use the correct bolts as indicated. Do not tighten any of the bolts until the table is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children and pets away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
The table is not to be used for standing purposes and will not function as a stool or step-ladder.
Standing on or misuse of table may result in damage or injury. Use on even surfaces only.
MAINTENANCE
Wash frame with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on the frame .
Well recommend the use of furniture covers when not in use.
Inspect and tighten all of the bolts and fasteners on a regular basis to ensure the proper performance and safety of your table.
In order to prolong the life and beauty of your table, we recommend that it be stored in a dry and protected area during off season periods.
GENERAL BEST PRACTISE FOR ASSEMBLY:
WARNINGS:
MAINTENANCE:
WGENERAL BEST PRACTICE FOR ASSEMBLY:

PARTS LIST
Part No. Part Qty Image Part No. Part Qty Image
1Table Top 1 4Short Bolt (M6x20mm) 20
2Table Support 1 5Washer 20
3Table Leg 4
Tool
PART REQUIRED: 1 & 4PC 3
Keep the bolts loose.
PARTS LIST:
STEP 1
X16
X16
5
4
3
1
5
4
3
3
3

STEP 2
PART REQUIRED: 2
Tighten all bolts by using the supplied Tool.
STEP 3
Warranty
One year limited warranty.
Proof of purchase (dated register receipt) is required for warranty claims.
It remains the customer's responsibility for freight and packing charges to and from the service center.
STEP 2
X4
X4
STEP 3
4
5
5
4
2